/* Contains all error handling interfaces for PETSc. */ #if !defined(__PETSCERROR_H) #define __PETSCERROR_H /* Defines the function where the compiled source is located; used in printing error messages. This is defined here in case the user does not declare it. */ #if !defined(__FUNCT__) #define __FUNCT__ "User provided function" #endif /* These are the generic error codes. These error codes are used many different places in the PETSc source code. The string versions are at src/sys/error/err.c any changes here must also be made there These are also define in include/petsc/finclude/petscerror.h any CHANGES here must be also made there. */ #define PETSC_ERR_MIN_VALUE 54 /* should always be one less then the smallest value */ #define PETSC_ERR_MEM 55 /* unable to allocate requested memory */ #define PETSC_ERR_SUP 56 /* no support for requested operation */ #define PETSC_ERR_SUP_SYS 57 /* no support for requested operation on this computer system */ #define PETSC_ERR_ORDER 58 /* operation done in wrong order */ #define PETSC_ERR_SIG 59 /* signal received */ #define PETSC_ERR_FP 72 /* floating point exception */ #define PETSC_ERR_COR 74 /* corrupted PETSc object */ #define PETSC_ERR_LIB 76 /* error in library called by PETSc */ #define PETSC_ERR_PLIB 77 /* PETSc library generated inconsistent data */ #define PETSC_ERR_MEMC 78 /* memory corruption */ #define PETSC_ERR_CONV_FAILED 82 /* iterative method (KSP or SNES) failed */ #define PETSC_ERR_USER 83 /* user has not provided needed function */ #define PETSC_ERR_SYS 88 /* error in system call */ #define PETSC_ERR_POINTER 70 /* pointer does not point to valid address */ #define PETSC_ERR_ARG_SIZ 60 /* nonconforming object sizes used in operation */ #define PETSC_ERR_ARG_IDN 61 /* two arguments not allowed to be the same */ #define PETSC_ERR_ARG_WRONG 62 /* wrong argument (but object probably ok) */ #define PETSC_ERR_ARG_CORRUPT 64 /* null or corrupted PETSc object as argument */ #define PETSC_ERR_ARG_OUTOFRANGE 63 /* input argument, out of range */ #define PETSC_ERR_ARG_BADPTR 68 /* invalid pointer argument */ #define PETSC_ERR_ARG_NOTSAMETYPE 69 /* two args must be same object type */ #define PETSC_ERR_ARG_NOTSAMECOMM 80 /* two args must be same communicators */ #define PETSC_ERR_ARG_WRONGSTATE 73 /* object in argument is in wrong state, e.g. unassembled mat */ #define PETSC_ERR_ARG_TYPENOTSET 89 /* the type of the object has not yet been set */ #define PETSC_ERR_ARG_INCOMP 75 /* two arguments are incompatible */ #define PETSC_ERR_ARG_NULL 85 /* argument is null that should not be */ #define PETSC_ERR_ARG_UNKNOWN_TYPE 86 /* type name doesn't match any registered type */ #define PETSC_ERR_FILE_OPEN 65 /* unable to open file */ #define PETSC_ERR_FILE_READ 66 /* unable to read from file */ #define PETSC_ERR_FILE_WRITE 67 /* unable to write to file */ #define PETSC_ERR_FILE_UNEXPECTED 79 /* unexpected data in file */ #define PETSC_ERR_MAT_LU_ZRPVT 71 /* detected a zero pivot during LU factorization */ #define PETSC_ERR_MAT_CH_ZRPVT 81 /* detected a zero pivot during Cholesky factorization */ #define PETSC_ERR_INT_OVERFLOW 84 #define PETSC_ERR_FLOP_COUNT 90 #define PETSC_ERR_NOT_CONVERGED 91 /* solver did not converge */ #define PETSC_ERR_MISSING_FACTOR 92 /* MatGetFactor() failed */ #define PETSC_ERR_OPT_OVERWRITE 93 /* attempted to over wrote options which should not be changed */ #define PETSC_ERR_MAX_VALUE 94 /* this is always the one more than the largest error code */ #define PetscStringizeArg(a) #a #define PetscStringize(a) PetscStringizeArg(a) #if defined(PETSC_USE_ERRORCHECKING) /*MC SETERRQ - Macro to be called when an error has been detected, Synopsis: #include PetscErrorCode SETERRQ(MPI_Comm comm,PetscErrorCode errorcode,char *message) Not Collective Input Parameters: + comm - A communicator, so that the error can be collective . errorcode - nonzero error code, see the list of standard error codes in include/petscerror.h - message - error message Level: beginner Notes: Once the error handler is called the calling function is then returned from with the given error code. See SETERRQ1(), SETERRQ2(), SETERRQ3() for versions that take arguments In Fortran MPI_Abort() is always called Experienced users can set the error handler with PetscPushErrorHandler(). Concepts: error^setting condition .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), CHKERRQ(), CHKMEMQ, SETERRQ1(), SETERRQ2(), SETERRQ3() M*/ #define SETERRQ(comm,n,s) return PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,n,PETSC_ERROR_INITIAL,s) /*MC SETERRQ1 - Macro that is called when an error has been detected, Synopsis: #include PetscErrorCode SETERRQ1(MPI_Comm comm,PetscErrorCode errorcode,char *formatmessage,arg) Not Collective Input Parameters: + comm - A communicator, so that the error can be collective . errorcode - nonzero error code, see the list of standard error codes in include/petscerror.h . message - error message in the printf format - arg - argument (for example an integer, string or double) Level: beginner Notes: Once the error handler is called the calling function is then returned from with the given error code. Experienced users can set the error handler with PetscPushErrorHandler(). Concepts: error^setting condition .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), CHKERRQ(), CHKMEMQ, SETERRQ(), SETERRQ2(), SETERRQ3() M*/ #define SETERRQ1(comm,n,s,a1) return PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,n,PETSC_ERROR_INITIAL,s,a1) /*MC SETERRQ2 - Macro that is called when an error has been detected, Synopsis: #include PetscErrorCode SETERRQ2(MPI_Comm comm,PetscErrorCode errorcode,char *formatmessage,arg1,arg2) Not Collective Input Parameters: + comm - A communicator, so that the error can be collective . errorcode - nonzero error code, see the list of standard error codes in include/petscerror.h . message - error message in the printf format . arg1 - argument (for example an integer, string or double) - arg2 - argument (for example an integer, string or double) Level: beginner Notes: Once the error handler is called the calling function is then returned from with the given error code. Experienced users can set the error handler with PetscPushErrorHandler(). Concepts: error^setting condition .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), CHKERRQ(), CHKMEMQ, SETERRQ1(), SETERRQ3() M*/ #define SETERRQ2(comm,n,s,a1,a2) return PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,n,PETSC_ERROR_INITIAL,s,a1,a2) /*MC SETERRQ3 - Macro that is called when an error has been detected, Synopsis: #include PetscErrorCode SETERRQ3(MPI_Comm comm,PetscErrorCode errorcode,char *formatmessage,arg1,arg2,arg3) Not Collective Input Parameters: + comm - A communicator, so that the error can be collective . errorcode - nonzero error code, see the list of standard error codes in include/petscerror.h . message - error message in the printf format . arg1 - argument (for example an integer, string or double) . arg2 - argument (for example an integer, string or double) - arg3 - argument (for example an integer, string or double) Level: beginner Notes: Once the error handler is called the calling function is then returned from with the given error code. There are also versions for 4, 5, 6 and 7 arguments. Experienced users can set the error handler with PetscPushErrorHandler(). Concepts: error^setting condition .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), CHKERRQ(), CHKMEMQ, SETERRQ1(), SETERRQ2() M*/ #define SETERRQ3(comm,n,s,a1,a2,a3) return PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,n,PETSC_ERROR_INITIAL,s,a1,a2,a3) /*MC SETERRQ4 - Macro that is called when an error has been detected, Synopsis: #include PetscErrorCode SETERRQ4(MPI_Comm comm,PetscErrorCode errorcode,char *formatmessage,arg1,arg2,arg3) Not Collective Input Parameters: + comm - A communicator, so that the error can be collective . errorcode - nonzero error code, see the list of standard error codes in include/petscerror.h . message - error message in the printf format . arg1 - argument (for example an integer, string or double) . arg2 - argument (for example an integer, string or double) . arg3 - argument (for example an integer, string or double) - arg4 - argument (for example an integer, string or double) Level: beginner Notes: Once the error handler is called the calling function is then returned from with the given error code. There are also versions for 4, 5, 6 and 7 arguments. Experienced users can set the error handler with PetscPushErrorHandler(). Concepts: error^setting condition .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), CHKERRQ(), CHKMEMQ, SETERRQ1(), SETERRQ2() M*/ #define SETERRQ4(comm,n,s,a1,a2,a3,a4) return PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,n,PETSC_ERROR_INITIAL,s,a1,a2,a3,a4) /*MC SETERRQ5 - Macro that is called when an error has been detected, Synopsis: #include PetscErrorCode SETERRQ5(MPI_Comm comm,PetscErrorCode errorcode,char *formatmessage,arg1,arg2,arg3) Not Collective Input Parameters: + comm - A communicator, so that the error can be collective . errorcode - nonzero error code, see the list of standard error codes in include/petscerror.h . message - error message in the printf format . arg1 - argument (for example an integer, string or double) . arg2 - argument (for example an integer, string or double) . arg3 - argument (for example an integer, string or double) . arg4 - argument (for example an integer, string or double) - arg5 - argument (for example an integer, string or double) Level: beginner Notes: Once the error handler is called the calling function is then returned from with the given error code. There are also versions for 4, 5, 6 and 7 arguments. Experienced users can set the error handler with PetscPushErrorHandler(). Concepts: error^setting condition .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), CHKERRQ(), CHKMEMQ, SETERRQ1(), SETERRQ2() M*/ #define SETERRQ5(comm,n,s,a1,a2,a3,a4,a5) return PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,n,PETSC_ERROR_INITIAL,s,a1,a2,a3,a4,a5) /*MC SETERRQ6 - Macro that is called when an error has been detected, Synopsis: #include PetscErrorCode SETERRQ6(MPI_Comm comm,PetscErrorCode errorcode,char *formatmessage,arg1,arg2,arg3) Not Collective Input Parameters: + comm - A communicator, so that the error can be collective . errorcode - nonzero error code, see the list of standard error codes in include/petscerror.h . message - error message in the printf format . arg1 - argument (for example an integer, string or double) . arg2 - argument (for example an integer, string or double) . arg3 - argument (for example an integer, string or double) . arg4 - argument (for example an integer, string or double) . arg5 - argument (for example an integer, string or double) - arg6 - argument (for example an integer, string or double) Level: beginner Notes: Once the error handler is called the calling function is then returned from with the given error code. There are also versions for 4, 5, 6 and 7 arguments. Experienced users can set the error handler with PetscPushErrorHandler(). Concepts: error^setting condition .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), CHKERRQ(), CHKMEMQ, SETERRQ1(), SETERRQ2() M*/ #define SETERRQ6(comm,n,s,a1,a2,a3,a4,a5,a6) return PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,n,PETSC_ERROR_INITIAL,s,a1,a2,a3,a4,a5,a6) /*MC SETERRQ7 - Macro that is called when an error has been detected, Synopsis: #include PetscErrorCode SETERRQ7(MPI_Comm comm,PetscErrorCode errorcode,char *formatmessage,arg1,arg2,arg3) Not Collective Input Parameters: + comm - A communicator, so that the error can be collective . errorcode - nonzero error code, see the list of standard error codes in include/petscerror.h . message - error message in the printf format . arg1 - argument (for example an integer, string or double) . arg2 - argument (for example an integer, string or double) . arg3 - argument (for example an integer, string or double) . arg4 - argument (for example an integer, string or double) . arg5 - argument (for example an integer, string or double) . arg6 - argument (for example an integer, string or double) - arg7 - argument (for example an integer, string or double) Level: beginner Notes: Once the error handler is called the calling function is then returned from with the given error code. There are also versions for 4, 5, 6 and 7 arguments. Experienced users can set the error handler with PetscPushErrorHandler(). Concepts: error^setting condition .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), CHKERRQ(), CHKMEMQ, SETERRQ1(), SETERRQ2() M*/ #define SETERRQ7(comm,n,s,a1,a2,a3,a4,a5,a6,a7) return PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,n,PETSC_ERROR_INITIAL,s,a1,a2,a3,a4,a5,a6,a7) /*MC SETERRQ8 - Macro that is called when an error has been detected, Synopsis: #include PetscErrorCode SETERRQ8(MPI_Comm comm,PetscErrorCode errorcode,char *formatmessage,arg1,arg2,arg3) Not Collective Input Parameters: + comm - A communicator, so that the error can be collective . errorcode - nonzero error code, see the list of standard error codes in include/petscerror.h . message - error message in the printf format . arg1 - argument (for example an integer, string or double) . arg2 - argument (for example an integer, string or double) . arg3 - argument (for example an integer, string or double) . arg4 - argument (for example an integer, string or double) . arg5 - argument (for example an integer, string or double) . arg6 - argument (for example an integer, string or double) . arg7 - argument (for example an integer, string or double) - arg8 - argument (for example an integer, string or double) Level: beginner Notes: Once the error handler is called the calling function is then returned from with the given error code. There are also versions for 4, 5, 6 and 7 arguments. Experienced users can set the error handler with PetscPushErrorHandler(). Concepts: error^setting condition .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), CHKERRQ(), CHKMEMQ, SETERRQ1(), SETERRQ2() M*/ #define SETERRQ8(comm,n,s,a1,a2,a3,a4,a5,a6,a7,a8) return PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,n,PETSC_ERROR_INITIAL,s,a1,a2,a3,a4,a5,a6,a7,a8) /*MC SETERRABORT - Macro that can be called when an error has been detected, Synopsis: #include PetscErrorCode SETERRABORT(MPI_Comm comm,PetscErrorCode errorcode,char *message) Not Collective Input Parameters: + comm - A communicator, so that the error can be collective . errorcode - nonzero error code, see the list of standard error codes in include/petscerror.h - message - error message in the printf format Level: beginner Notes: This function just calls MPI_Abort(). Concepts: error^setting condition .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), CHKERRQ(), CHKMEMQ, SETERRQ1(), SETERRQ2() M*/ #define SETERRABORT(comm,n,s) do {PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,n,PETSC_ERROR_INITIAL,s);MPI_Abort(comm,n);} while (0) /*MC CHKERRQ - Checks error code, if non-zero it calls the error handler and then returns Synopsis: #include PetscErrorCode CHKERRQ(PetscErrorCode errorcode) Not Collective Input Parameters: . errorcode - nonzero error code, see the list of standard error codes in include/petscerror.h Level: beginner Notes: Once the error handler is called the calling function is then returned from with the given error code. Experienced users can set the error handler with PetscPushErrorHandler(). CHKERRQ(n) is fundamentally a macro replacement for if (n) return(PetscError(...,n,...)); Although typical usage resembles "void CHKERRQ(PetscErrorCode)" as described above, for certain uses it is highly inappropriate to use it in this manner as it invokes return(PetscErrorCode). In particular, it cannot be used in functions which return(void) or any other datatype. In these types of functions, you can use CHKERRV() which returns without an error code (bad idea since the error is ignored or if (n) {PetscError(....); return(YourReturnType);} where you may pass back a NULL to indicate an error. You can also call CHKERRABORT(comm,n) to have MPI_Abort() returned immediately. In Fortran MPI_Abort() is always called Concepts: error^setting condition .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), SETERRQ(), CHKMEMQ, SETERRQ1(), SETERRQ2(), SETERRQ2() M*/ #define CHKERRQ(n) do {if (PetscUnlikely(n)) return PetscError(PETSC_COMM_SELF,__LINE__,PETSC_FUNCTION_NAME,__FILE__,n,PETSC_ERROR_REPEAT," ");} while (0) #define CHKERRV(n) do {if (PetscUnlikely(n)) {n = PetscError(PETSC_COMM_SELF,__LINE__,PETSC_FUNCTION_NAME,__FILE__,n,PETSC_ERROR_REPEAT," ");return;}} while(0) #define CHKERRABORT(comm,n) do {if (PetscUnlikely(n)) {PetscError(PETSC_COMM_SELF,__LINE__,PETSC_FUNCTION_NAME,__FILE__,n,PETSC_ERROR_REPEAT," ");MPI_Abort(comm,n);}} while (0) #define CHKERRCONTINUE(n) do {if (PetscUnlikely(n)) {PetscError(PETSC_COMM_SELF,__LINE__,PETSC_FUNCTION_NAME,__FILE__,n,PETSC_ERROR_REPEAT," ");}} while (0) #ifdef PETSC_CLANGUAGE_CXX /*MC CHKERRXX - Checks error code, if non-zero it calls the C++ error handler which throws an exception Synopsis: #include void CHKERRXX(PetscErrorCode errorcode) Not Collective Input Parameters: . errorcode - nonzero error code, see the list of standard error codes in include/petscerror.h Level: beginner Notes: Once the error handler throws a ??? exception. You can use CHKERRV() which returns without an error code (bad idea since the error is ignored) or CHKERRABORT(comm,n) to have MPI_Abort() returned immediately. Concepts: error^setting condition .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), SETERRQ(), CHKERRQ(), CHKMEMQ M*/ #define CHKERRXX(n) do {if (PetscUnlikely(n)) {PetscError(PETSC_COMM_SELF,__LINE__,PETSC_FUNCTION_NAME,__FILE__,n,PETSC_ERROR_IN_CXX,0);}} while(0) #endif #define CHKERRCUDA(err) do {if (PetscUnlikely(err)) SETERRQ1(PETSC_COMM_SELF,PETSC_ERR_LIB,"CUDA error %d",err);} while(0) #define CHKERRCUBLAS(err) do {if (PetscUnlikely(err)) SETERRQ1(PETSC_COMM_SELF,PETSC_ERR_LIB,"CUBLAS error %d",err);} while(0) /*MC CHKMEMQ - Checks the memory for corruption, calls error handler if any is detected Synopsis: #include CHKMEMQ; Not Collective Level: beginner Notes: We highly recommend using valgrind http://www.mcs.anl.gov/petsc/documentation/faq.html#valgrind for finding memory problems. This is useful on systems that do not have valgrind, but much much less useful. Must run with the option -malloc_debug to enable this option Once the error handler is called the calling function is then returned from with the given error code. By defaults prints location where memory that is corrupted was allocated. Use CHKMEMA for functions that return void Concepts: memory corruption .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), SETERRQ(), CHKMEMQ, SETERRQ1(), SETERRQ2(), SETERRQ3(), PetscMallocValidate() M*/ #define CHKMEMQ do {PetscErrorCode _7_ierr = PetscMallocValidate(__LINE__,PETSC_FUNCTION_NAME,__FILE__);CHKERRQ(_7_ierr);} while(0) #define CHKMEMA PetscMallocValidate(__LINE__,PETSC_FUNCTION_NAME,__FILE__) #else /* PETSC_USE_ERRORCHECKING */ /* These are defined to be empty for when error checking is turned off, with ./configure --with-errorchecking=0 */ #define SETERRQ(c,n,s) #define SETERRQ1(c,n,s,a1) #define SETERRQ2(c,n,s,a1,a2) #define SETERRQ3(c,n,s,a1,a2,a3) #define SETERRQ4(c,n,s,a1,a2,a3,a4) #define SETERRQ5(c,n,s,a1,a2,a3,a4,a5) #define SETERRQ6(c,n,s,a1,a2,a3,a4,a5,a6) #define SETERRQ7(c,n,s,a1,a2,a3,a4,a5,a6,a7) #define SETERRQ8(c,n,s,a1,a2,a3,a4,a5,a6,a7,a8) #define SETERRABORT(comm,n,s) #define CHKERRQ(n) ; #define CHKERRV(n) ; #define CHKERRABORT(comm,n) ; #define CHKERRCONTINUE(n) ; #define CHKMEMQ ; #define CHKERRCUDA(err) ; #define CHKERRCUBLAS(err) ; #ifdef PETSC_CLANGUAGE_CXX #define CHKERRXX(n) ; #endif #endif /* PETSC_USE_ERRORCHECKING */ /*E PetscErrorType - passed to the PETSc error handling routines indicating if this is the first or a later call to the error handlers Level: advanced PETSC_ERROR_IN_CXX indicates the error was detected in C++ and an exception should be generated Developer Notes: This is currently used to decide when to print the detailed information about the run in PetscTraceBackErrorHandler() .seealso: PetscError(), SETERRXX() E*/ typedef enum {PETSC_ERROR_INITIAL=0,PETSC_ERROR_REPEAT=1,PETSC_ERROR_IN_CXX = 2} PetscErrorType; #if defined(__clang_analyzer__) __attribute__((analyzer_noreturn)) #endif PETSC_EXTERN PetscErrorCode PetscError(MPI_Comm,int,const char*,const char*,PetscErrorCode,PetscErrorType,const char*,...); PETSC_EXTERN PetscErrorCode PetscErrorPrintfInitialize(void); PETSC_EXTERN PetscErrorCode PetscErrorMessage(int,const char*[],char **); PETSC_EXTERN PetscErrorCode PetscTraceBackErrorHandler(MPI_Comm,int,const char*,const char*,PetscErrorCode,PetscErrorType,const char*,void*); PETSC_EXTERN PetscErrorCode PetscIgnoreErrorHandler(MPI_Comm,int,const char*,const char*,PetscErrorCode,PetscErrorType,const char*,void*); PETSC_EXTERN PetscErrorCode PetscEmacsClientErrorHandler(MPI_Comm,int,const char*,const char*,PetscErrorCode,PetscErrorType,const char*,void*); PETSC_EXTERN PetscErrorCode PetscMPIAbortErrorHandler(MPI_Comm,int,const char*,const char*,PetscErrorCode,PetscErrorType,const char*,void*); PETSC_EXTERN PetscErrorCode PetscAbortErrorHandler(MPI_Comm,int,const char*,const char*,PetscErrorCode,PetscErrorType,const char*,void*); PETSC_EXTERN PetscErrorCode PetscAttachDebuggerErrorHandler(MPI_Comm,int,const char*,const char*,PetscErrorCode,PetscErrorType,const char*,void*); PETSC_EXTERN PetscErrorCode PetscReturnErrorHandler(MPI_Comm,int,const char*,const char*,PetscErrorCode,PetscErrorType,const char*,void*); PETSC_EXTERN PetscErrorCode PetscPushErrorHandler(PetscErrorCode (*handler)(MPI_Comm,int,const char*,const char*,PetscErrorCode,PetscErrorType,const char*,void*),void*); PETSC_EXTERN PetscErrorCode PetscPopErrorHandler(void); PETSC_EXTERN PetscErrorCode PetscSignalHandlerDefault(int,void*); PETSC_EXTERN PetscErrorCode PetscPushSignalHandler(PetscErrorCode (*)(int,void *),void*); PETSC_EXTERN PetscErrorCode PetscPopSignalHandler(void); PETSC_EXTERN PetscErrorCode PetscCheckPointerSetIntensity(PetscInt); /*MC PetscErrorPrintf - Prints error messages. Synopsis: #include PetscErrorCode (*PetscErrorPrintf)(const char format[],...); Not Collective Input Parameters: . format - the usual printf() format string Options Database Keys: + -error_output_stdout - cause error messages to be printed to stdout instead of the (default) stderr - -error_output_none - to turn off all printing of error messages (does not change the way the error is handled.) Notes: Use $ PetscErrorPrintf = PetscErrorPrintfNone; to turn off all printing of error messages (does not change the way the $ error is handled.) and $ PetscErrorPrintf = PetscErrorPrintfDefault; to turn it back on or you can use your own function Use PETSC_STDERR = FILE* obtained from a file open etc. to have stderr printed to the file. PETSC_STDOUT = FILE* obtained from a file open etc. to have stdout printed to the file. Use PetscPushErrorHandler() to provide your own error handler that determines what kind of messages to print Level: developer Fortran Note: This routine is not supported in Fortran. Concepts: error messages^printing Concepts: printing^error messages .seealso: PetscFPrintf(), PetscSynchronizedPrintf(), PetscHelpPrintf(), PetscPrintf(), PetscErrorHandlerPush(), PetscVFPrintf(), PetscHelpPrintf() M*/ PETSC_EXTERN PetscErrorCode (*PetscErrorPrintf)(const char[],...); typedef enum {PETSC_FP_TRAP_OFF=0,PETSC_FP_TRAP_ON=1} PetscFPTrap; PETSC_EXTERN PetscErrorCode PetscSetFPTrap(PetscFPTrap); PETSC_EXTERN PetscErrorCode PetscFPTrapPush(PetscFPTrap); PETSC_EXTERN PetscErrorCode PetscFPTrapPop(void); /* Allows the code to build a stack frame as it runs */ #define PETSCSTACKSIZE 64 typedef struct { const char *function[PETSCSTACKSIZE]; const char *file[PETSCSTACKSIZE]; int line[PETSCSTACKSIZE]; PetscBool petscroutine[PETSCSTACKSIZE]; int currentsize; int hotdepth; } PetscStack; PETSC_EXTERN PetscStack *petscstack; PetscErrorCode PetscStackCopy(PetscStack*,PetscStack*); PetscErrorCode PetscStackPrint(PetscStack *,FILE*); #if defined(PETSC_USE_DEBUG) PETSC_STATIC_INLINE PetscBool PetscStackActive(void) { return(petscstack ? PETSC_TRUE : PETSC_FALSE); } /* Stack handling is based on the following two "NoCheck" macros. These should only be called directly by other error * handling macros. We record the line of the call, which may or may not be the location of the definition. But is at * least more useful than "unknown" because it can distinguish multiple calls from the same function. */ #define PetscStackPushNoCheck(funct,petsc_routine,hot) \ do { \ PetscStackSAWsTakeAccess(); \ if (petscstack && (petscstack->currentsize < PETSCSTACKSIZE)) { \ petscstack->function[petscstack->currentsize] = funct; \ petscstack->file[petscstack->currentsize] = __FILE__; \ petscstack->line[petscstack->currentsize] = __LINE__; \ petscstack->petscroutine[petscstack->currentsize] = petsc_routine; \ petscstack->currentsize++; \ } \ if (petscstack) { \ petscstack->hotdepth += (hot || petscstack->hotdepth); \ } \ PetscStackSAWsGrantAccess(); \ } while (0) #define PetscStackPopNoCheck \ do { \ PetscStackSAWsTakeAccess(); \ if (petscstack && petscstack->currentsize > 0) { \ petscstack->currentsize--; \ petscstack->function[petscstack->currentsize] = 0; \ petscstack->file[petscstack->currentsize] = 0; \ petscstack->line[petscstack->currentsize] = 0; \ petscstack->petscroutine[petscstack->currentsize] = PETSC_FALSE;\ } \ if (petscstack) { \ petscstack->hotdepth = PetscMax(petscstack->hotdepth-1,0); \ } \ PetscStackSAWsGrantAccess(); \ } while (0) /*MC PetscFunctionBegin - First executable line of each PETSc function, used for error handling. Final line of PETSc functions should be PetscFunctionReturn(0); Synopsis: #include void PetscFunctionBegin; Not Collective Usage: .vb int something; PetscFunctionBegin; .ve Notes: Use PetscFunctionBeginUser for application codes. Not available in Fortran Level: developer .seealso: PetscFunctionReturn(), PetscFunctionBeginHot(), PetscFunctionBeginUser() .keywords: traceback, error handling M*/ #define PetscFunctionBegin do { \ PetscStackPushNoCheck(PETSC_FUNCTION_NAME,PETSC_TRUE,PETSC_FALSE); \ PetscCheck__FUNCT__(); \ PetscRegister__FUNCT__(); \ } while (0) /*MC PetscFunctionBeginHot - Substitute for PetscFunctionBegin to be used in functions that are called in performance-critical circumstances. Use of this function allows for lighter profiling by default. Synopsis: #include void PetscFunctionBeginHot; Not Collective Usage: .vb int something; PetscFunctionBeginHot; .ve Notes: Not available in Fortran Level: developer .seealso: PetscFunctionBegin, PetscFunctionReturn() .keywords: traceback, error handling M*/ #define PetscFunctionBeginHot do { \ PetscStackPushNoCheck(PETSC_FUNCTION_NAME,PETSC_TRUE,PETSC_TRUE); \ PetscCheck__FUNCT__(); \ PetscRegister__FUNCT__(); \ } while (0) /*MC PetscFunctionBeginUser - First executable line of user provided PETSc routine Synopsis: #include void PetscFunctionBeginUser; Not Collective Usage: .vb int something; PetscFunctionBeginUser; .ve Notes: Final line of PETSc functions should be PetscFunctionReturn(0) except for main(). Not available in Fortran This is identical to PetscFunctionBegin except it labels the routine as a user routine instead of as a PETSc library routine. Level: intermediate .seealso: PetscFunctionReturn(), PetscFunctionBegin, PetscFunctionBeginHot .keywords: traceback, error handling M*/ #define PetscFunctionBeginUser \ do { \ PetscStackPushNoCheck(PETSC_FUNCTION_NAME,PETSC_FALSE,PETSC_FALSE); \ PetscCheck__FUNCT__(); \ PetscRegister__FUNCT__(); \ } while (0) #if defined(PETSC_SERIALIZE_FUNCTIONS) #include /* Registers the current function into the global function pointer to function name table Have to fix this to handle errors but cannot return error since used in PETSC_VIEWER_DRAW_() etc */ #define PetscRegister__FUNCT__() do { \ static PetscBool __chked = PETSC_FALSE; \ if (!__chked) {\ void *ptr; PetscDLSym(NULL,__FUNCT__,&ptr);\ __chked = PETSC_TRUE;\ }} while (0) #else #define PetscRegister__FUNCT__() #endif #define PetscCheck__FUNCT__() do { PetscBool _sc1,_sc2; \ PetscStrcmpNoError(PETSC_FUNCTION_NAME,__FUNCT__,&_sc1);\ PetscStrcmpNoError(__FUNCT__,"User provided function",&_sc2);\ if (!_sc1 && !_sc2) { \ printf("%s:%d: __FUNCT__=\"%s\" does not agree with %s=\"%s\"\n",__FILE__,__LINE__,__FUNCT__,PetscStringize(PETSC_FUNCTION_NAME),PETSC_FUNCTION_NAME); \ } \ } while (0) #define PetscStackPush(n) \ do { \ PetscStackPushNoCheck(n,PETSC_FALSE,PETSC_FALSE); \ CHKMEMQ; \ } while (0) #define PetscStackPop \ do { \ CHKMEMQ; \ PetscStackPopNoCheck; \ } while (0) /*MC PetscFunctionReturn - Last executable line of each PETSc function used for error handling. Replaces return() Synopsis: #include void PetscFunctionReturn(0); Not Collective Usage: .vb .... PetscFunctionReturn(0); } .ve Notes: Not available in Fortran Level: developer .seealso: PetscFunctionBegin() .keywords: traceback, error handling M*/ #define PetscFunctionReturn(a) \ do { \ PetscStackPopNoCheck; \ return(a);} while (0) #define PetscFunctionReturnVoid() \ do { \ PetscStackPopNoCheck; \ return;} while (0) #else PETSC_STATIC_INLINE PetscBool PetscStackActive(void) {return PETSC_FALSE;} #define PetscStackPushNoCheck(funct,petsc_routine,hot) do {} while (0) #define PetscStackPopNoCheck do {} while (0) #define PetscFunctionBegin #define PetscFunctionBeginUser #define PetscFunctionBeginHot #define PetscFunctionReturn(a) return(a) #define PetscFunctionReturnVoid() return #define PetscStackPop CHKMEMQ #define PetscStackPush(f) CHKMEMQ #endif /* PetscStackCall - Calls an external library routine or user function after pushing the name of the routine on the stack. Input Parameters: + name - string that gives the name of the function being called - routine - actual call to the routine, including ierr = and CHKERRQ(ierr); Note: Often one should use PetscStackCallStandard() instead. This routine is intended for external library routines that DO NOT return error codes Developer Note: this is so that when a user or external library routine results in a crash or corrupts memory, they get blamed instead of PETSc. */ #define PetscStackCall(name,routine) do { PetscStackPush(name);routine;PetscStackPop; } while(0) /* PetscStackCallStandard - Calls an external library routine after pushing the name of the routine on the stack. Input Parameters: + func- name of the routine - args - arguments to the routine surrounded by () Notes: This is intended for external package routines that return error codes. Use PetscStackCall() for those that do not. Developer Note: this is so that when an external packge routine results in a crash or corrupts memory, they get blamed instead of PETSc. */ #define PetscStackCallStandard(func,args) do { \ PetscStackPush(#func);ierr = func args;PetscStackPop; if (ierr) SETERRQ1(PETSC_COMM_SELF,PETSC_ERR_LIB,"Error in %s()",#func); \ } while (0) PETSC_EXTERN PetscErrorCode PetscStackCreate(void); PETSC_EXTERN PetscErrorCode PetscStackView(FILE*); PETSC_EXTERN PetscErrorCode PetscStackDestroy(void); #endif