/* This is the main PETSc include file (for C and C++). It is included by all other PETSc include files, so it almost never has to be specifically included. */ #if !defined(__PETSCSYS_H) #define __PETSCSYS_H /* ========================================================================== */ /* petscconf.h is contained in ${PETSC_ARCH}/include/petscconf.h it is found automatically by the compiler due to the -I${PETSC_DIR}/${PETSC_ARCH}/include in the conf/variables definition of PETSC_INCLUDE */ #include "petscconf.h" #include "petscfix.h" /* ========================================================================== */ /* This facilitates using C version of PETSc from C++ and C++ version from C. Use --with-c-support --with-clanguage=c++ with ./configure for the latter) */ #if defined(PETSC_CLANGUAGE_CXX) && !defined(PETSC_USE_EXTERN_CXX) && !defined(__cplusplus) #error "PETSc configured with --with-clanguage=c++ and NOT --with-c-support - it can be used only with a C++ compiler" #endif #if defined(PETSC_USE_EXTERN_CXX) && defined(__cplusplus) #define PETSC_EXTERN_CXX_BEGIN extern "C" { #define PETSC_EXTERN_CXX_END } #else #define PETSC_EXTERN_CXX_BEGIN #define PETSC_EXTERN_CXX_END #endif /* ========================================================================== */ /* Current PETSc version number and release date. Also listed in Web page src/docs/tex/manual/intro.tex, src/docs/tex/manual/manual.tex. src/docs/website/index.html. */ #include "petscversion.h" #define PETSC_AUTHOR_INFO " The PETSc Team\n petsc-maint@mcs.anl.gov\n http://www.mcs.anl.gov/petsc/\n" #if (PETSC_VERSION_RELEASE == 1) #define PetscGetVersion(version,len) PetscSNPrintf(version,len,"Petsc Release Version %d.%d.%d, Patch %d, %s ", \ PETSC_VERSION_MAJOR,PETSC_VERSION_MINOR, PETSC_VERSION_SUBMINOR, \ PETSC_VERSION_PATCH,PETSC_VERSION_PATCH_DATE) #else #define PetscGetVersion(version,len) PetscSNPrintf(version,len,"Petsc Development HG revision: %s HG Date: %s", \ PETSC_VERSION_HG, PETSC_VERSION_DATE_HG) #endif /*MC PetscGetVersion - Gets the PETSc version information in a string. Input Parameter: . len - length of the string Output Parameter: . version - version string Level: developer Usage: char version[256]; ierr = PetscGetVersion(version,256);CHKERRQ(ierr) Fortran Note: This routine is not supported in Fortran. .seealso: PetscGetProgramName() M*/ /* ========================================================================== */ /* Currently cannot check formatting for PETSc print statements because we have our own format %D and %G */ #undef PETSC_PRINTF_FORMAT_CHECK #define PETSC_PRINTF_FORMAT_CHECK(a,b) #undef PETSC_FPRINTF_FORMAT_CHECK #define PETSC_FPRINTF_FORMAT_CHECK(a,b) /* Fixes for ./configure time choices which impact our interface. Currently only calling conventions and extra compiler checking falls under this category. */ #if !defined(PETSC_STDCALL) #define PETSC_STDCALL #endif #if !defined(PETSC_TEMPLATE) #define PETSC_TEMPLATE #endif #if !defined(PETSC_HAVE_DLL_EXPORT) #define PETSC_DLL_EXPORT #define PETSC_DLL_IMPORT #endif #if !defined(PETSC_DLLEXPORT) #define PETSC_DLLEXPORT #endif #if !defined(PETSCVEC_DLLEXPORT) #define PETSCVEC_DLLEXPORT #endif #if !defined(PETSCMAT_DLLEXPORT) #define PETSCMAT_DLLEXPORT #endif #if !defined(PETSCDM_DLLEXPORT) #define PETSCDM_DLLEXPORT #endif #if !defined(PETSCKSP_DLLEXPORT) #define PETSCKSP_DLLEXPORT #endif #if !defined(PETSCSNES_DLLEXPORT) #define PETSCSNES_DLLEXPORT #endif #if !defined(PETSCTS_DLLEXPORT) #define PETSCTS_DLLEXPORT #endif #if !defined(PETSCFORTRAN_DLLEXPORT) #define PETSCFORTRAN_DLLEXPORT #endif /* ========================================================================== */ /* Defines the interface to MPI allowing the use of all MPI functions. PETSc does not use the C++ binding of MPI at ALL. The following flag makes sure the C++ bindings are not included. The C++ bindings REQUIRE putting mpi.h before ANY C++ include files, we cannot control this with all PETSc users. Users who want to use the MPI C++ bindings can include mpicxx.h directly in their code */ #define MPICH_SKIP_MPICXX 1 #define OMPI_SKIP_MPICXX 1 #include "mpi.h" /* Yuck, we need to put stdio.h AFTER mpi.h for MPICH2 with C++ compiler see the top of mpicxx.h in the MPICH2 distribution. The MPI STANDARD HAS TO BE CHANGED to prevent this nonsense. */ #include /* MSMPI on 32bit windows requires this yukky hack - that breaks MPI standard compliance */ #if !defined(MPIAPI) #define MPIAPI #endif /*MC PetscErrorCode - datatype used for return error code from all PETSc functions Level: beginner .seealso: CHKERRQ, SETERRQ M*/ typedef int PetscErrorCode; /*MC PetscClassId - A unique id used to identify each PETSc class. (internal integer in the data structure used for error checking). These are all defined by an offset from the lowest one, PETSC_SMALLEST_CLASSID. Level: advanced .seealso: PetscClassIdRegister(), PetscLogEventRegister(), PetscHeaderCreate() M*/ typedef int PetscClassId; /*MC PetscLogEvent - id used to identify PETSc or user events which timed portions (blocks of executable) code. Level: intermediate .seealso: PetscLogEventRegister(), PetscLogEventBegin(), PetscLogEventEnd(), PetscLogStage M*/ typedef int PetscLogEvent; /*MC PetscLogStage - id used to identify user stages (phases, sections) of runs - for logging Level: intermediate .seealso: PetscLogStageRegister(), PetscLogStageBegin(), PetscLogStageEnd(), PetscLogEvent M*/ typedef int PetscLogStage; /*MC PetscBLASInt - datatype used to represent 'int' parameters to BLAS/LAPACK functions. Level: intermediate Notes: usually this is the same as PetscInt, but if PETSc was built with --with-64-bit-indices but standard C/Fortran integers are 32 bit then this is NOT the same as PetscInt it remains 32 bit (except on very rare BLAS/LAPACK implementations that support 64 bit integers). PetscBLASIntCheck(a) checks if the given PetscInt a will fit in a PetscBLASInt, if not it generates a PETSC_ERR_ARG_OUTOFRANGE. PetscBLASInt b = PetscBLASIntCast(a) checks if the given PetscInt a will fit in a PetscBLASInt, if not it generates a PETSC_ERR_ARG_OUTOFRANGE .seealso: PetscMPIInt, PetscInt M*/ typedef int PetscBLASInt; /*MC PetscMPIInt - datatype used to represent 'int' parameters to MPI functions. Level: intermediate Notes: usually this is the same as PetscInt, but if PETSc was built with --with-64-bit-indices but standard C/Fortran integers are 32 bit then this is NOT the same as PetscInt it remains 32 bit PetscMPIIntCheck(a) checks if the given PetscInt a will fit in a PetscMPIInt, if not it generates a PETSC_ERR_ARG_OUTOFRANGE. PetscMPIInt b = PetscMPIIntCast(a) checks if the given PetscInt a will fit in a PetscMPIInt, if not it generates a PETSC_ERR_ARG_OUTOFRANGE .seealso: PetscBLASInt, PetscInt M*/ typedef int PetscMPIInt; /*MC PetscEnum - datatype used to pass enum types within PETSc functions. Level: intermediate PetscMPIIntCheck(a) checks if the given PetscInt a will fit in a PetscMPIInt, if not it generates a PETSC_ERR_ARG_OUTOFRANGE. PetscMPIInt b = PetscMPIIntCast(a) checks if the given PetscInt a will fit in a PetscMPIInt, if not it generates a PETSC_ERR_ARG_OUTOFRANGE .seealso: PetscOptionsGetEnum(), PetscOptionsEnum(), PetscBagRegisterEnum() M*/ typedef enum { ENUM_DUMMY } PetscEnum; /*MC PetscInt - PETSc type that represents integer - used primarily to represent size of arrays and indexing into arrays. Its size can be configured with the option --with-64-bit-indices - to be either 32bit or 64bit [default 32 bit ints] Level: intermediate .seealso: PetscScalar, PetscBLASInt, PetscMPIInt M*/ #if defined(PETSC_USE_64BIT_INDICES) typedef long long PetscInt; #define MPIU_INT MPI_LONG_LONG_INT #else typedef int PetscInt; #define MPIU_INT MPI_INT #endif /* For the rare cases when one needs to send a size_t object with MPI */ #if (PETSC_SIZEOF_SIZE_T) == (PETSC_SIZEOF_INT) #define MPIU_SIZE_T MPI_INT #elif (PETSC_SIZEOF_SIZE_T) == (PETSC_SIZEOF_LONG) #define MPIU_SIZE_T MPI_LONG #elif (PETSC_SIZEOF_SIZE_T) == (PETSC_SIZEOF_LONG_LONG) #define MPIU_SIZE_T MPI_LONG_LONG_INT #else #error "Unknown size for size_t! Send us a bugreport at petsc-maint@mcs.anl.gov" #endif /* You can use PETSC_STDOUT as a replacement of stdout. You can also change the value of PETSC_STDOUT to redirect all standard output elsewhere */ extern FILE* PETSC_STDOUT; /* You can use PETSC_STDERR as a replacement of stderr. You can also change the value of PETSC_STDERR to redirect all standard error elsewhere */ extern FILE* PETSC_STDERR; /* PETSC_ZOPEFD is used to send data to the PETSc webpage. It can be used in conjunction with PETSC_STDOUT, or by itself. */ extern FILE* PETSC_ZOPEFD; #if !defined(PETSC_USE_EXTERN_CXX) && defined(__cplusplus) /*MC PetscPolymorphicSubroutine - allows defining a C++ polymorphic version of a PETSc function that remove certain optional arguments for a simplier user interface Synopsis: PetscPolymorphicSubroutine(Functionname,(arguments of C++ function),(arguments of C function)) Not collective Level: developer Example: PetscPolymorphicSubroutine(VecNorm,(Vec x,PetscReal *r),(x,NORM_2,r)) generates the new routine PetscErrorCode VecNorm(Vec x,PetscReal *r) = VecNorm(x,NORM_2,r) .seealso: PetscPolymorphicFunction() M*/ #define PetscPolymorphicSubroutine(A,B,C) PETSC_STATIC_INLINE PetscErrorCode A B {return A C;} /*MC PetscPolymorphicScalar - allows defining a C++ polymorphic version of a PETSc function that replaces a PetscScalar * argument with a PetscScalar argument Synopsis: PetscPolymorphicScalar(Functionname,(arguments of C++ function),(arguments of C function)) Not collective Level: developer Example: PetscPolymorphicScalar(VecAXPY,(PetscScalar _val,Vec x,Vec y),(&_Val,x,y)) generates the new routine PetscErrorCode VecAXPY(PetscScalar _val,Vec x,Vec y) = {PetscScalar _Val = _val; return VecAXPY(&_Val,x,y);} .seealso: PetscPolymorphicFunction(),PetscPolymorphicSubroutine() M*/ #define PetscPolymorphicScalar(A,B,C) PETSC_STATIC_INLINE PetscErrorCode A B {PetscScalar _Val = _val; return A C;} /*MC PetscPolymorphicFunction - allows defining a C++ polymorphic version of a PETSc function that remove certain optional arguments for a simplier user interface and returns the computed value (istead of an error code) Synopsis: PetscPolymorphicFunction(Functionname,(arguments of C++ function),(arguments of C function),return type,return variable name) Not collective Level: developer Example: PetscPolymorphicFunction(VecNorm,(Vec x,NormType t),(x,t,&r),PetscReal,r) generates the new routine PetscReal VecNorm(Vec x,NormType t) = {PetscReal r; VecNorm(x,t,&r); return r;} .seealso: PetscPolymorphicSubroutine() M*/ #define PetscPolymorphicFunction(A,B,C,D,E) PETSC_STATIC_INLINE D A B {D E; A C;return E;} #else #define PetscPolymorphicSubroutine(A,B,C) #define PetscPolymorphicScalar(A,B,C) #define PetscPolymorphicFunction(A,B,C,D,E) #endif /*MC PetscUnlikely - hints the compiler that the given condition is usually FALSE Synopsis: PetscTruth PetscUnlikely(PetscTruth cond) Not Collective Input Parameters: . cond - condition or expression Note: This returns the same truth value, it is only a hint to compilers that the resulting branch is unlikely. Level: advanced .seealso: PetscLikely(), CHKERRQ M*/ /*MC PetscLikely - hints the compiler that the given condition is usually TRUE Synopsis: PetscTruth PetscUnlikely(PetscTruth cond) Not Collective Input Parameters: . cond - condition or expression Note: This returns the same truth value, it is only a hint to compilers that the resulting branch is likely. Level: advanced .seealso: PetscUnlikely() M*/ #if defined(PETSC_HAVE_BUILTIN_EXPECT) # define PetscUnlikely(cond) __builtin_expect(!!(cond),0) # define PetscLikely(cond) __builtin_expect(!!(cond),1) #else # define PetscUnlikely(cond) (cond) # define PetscLikely(cond) (cond) #endif /* Extern indicates a PETSc function defined elsewhere */ #if !defined(EXTERN) #define EXTERN extern #endif /* Defines some elementary mathematics functions and constants. */ #include "petscmath.h" /* Declare extern C stuff after including external header files */ PETSC_EXTERN_CXX_BEGIN /* Basic PETSc constants */ /*E PetscTruth - Logical variable. Actually an int in C and a logical in Fortran. Level: beginner E*/ typedef enum { PETSC_FALSE,PETSC_TRUE } PetscTruth; extern const char *PetscTruths[]; /*MC PETSC_FALSE - False value of PetscTruth Level: beginner Note: Zero integer .seealso: PetscTruth, PETSC_TRUE M*/ /*MC PETSC_TRUE - True value of PetscTruth Level: beginner Note: Nonzero integer .seealso: PetscTruth, PETSC_FALSE M*/ /*MC PETSC_YES - Alias for PETSC_TRUE Level: beginner Note: Zero integer .seealso: PetscTruth, PETSC_TRUE, PETSC_FALSE, PETSC_NO M*/ #define PETSC_YES PETSC_TRUE /*MC PETSC_NO - Alias for PETSC_FALSE Level: beginner Note: Nonzero integer .seealso: PetscTruth, PETSC_TRUE, PETSC_FALSE, PETSC_YES M*/ #define PETSC_NO PETSC_FALSE /*MC PETSC_NULL - standard way of passing in a null or array or pointer Level: beginner Notes: accepted by many PETSc functions to not set a parameter and instead use some default This macro does not exist in Fortran; you must use PETSC_NULL_INTEGER, PETSC_NULL_DOUBLE_PRECISION, PETSC_NULL_FUNCTION, PETSC_NULL_OBJECT etc .seealso: PETSC_DECIDE, PETSC_DEFAULT, PETSC_IGNORE, PETSC_DETERMINE M*/ #define PETSC_NULL 0 /*MC PETSC_DECIDE - standard way of passing in integer or floating point parameter where you wish PETSc to use the default. Level: beginner .seealso: PETSC_NULL, PETSC_DEFAULT, PETSC_IGNORE, PETSC_DETERMINE M*/ #define PETSC_DECIDE -1 /*MC PETSC_DEFAULT - standard way of passing in integer or floating point parameter where you wish PETSc to use the default. Level: beginner Fortran Notes: You need to use PETSC_DEFAULT_INTEGER or PETSC_DEFAULT_DOUBLE_PRECISION. .seealso: PETSC_DECIDE, PETSC_NULL, PETSC_IGNORE, PETSC_DETERMINE M*/ #define PETSC_DEFAULT -2 /*MC PETSC_IGNORE - same as PETSC_NULL, means PETSc will ignore this argument Level: beginner Note: accepted by many PETSc functions to not set a parameter and instead use some default Fortran Notes: This macro does not exist in Fortran; you must use PETSC_NULL_INTEGER, PETSC_NULL_DOUBLE_PRECISION etc .seealso: PETSC_DECIDE, PETSC_DEFAULT, PETSC_NULL, PETSC_DETERMINE M*/ #define PETSC_IGNORE PETSC_NULL /*MC PETSC_DETERMINE - standard way of passing in integer or floating point parameter where you wish PETSc to compute the required value. Level: beginner .seealso: PETSC_DECIDE, PETSC_DEFAULT, PETSC_IGNORE, PETSC_NULL, VecSetSizes() M*/ #define PETSC_DETERMINE PETSC_DECIDE /*MC PETSC_COMM_WORLD - the equivalent of the MPI_COMM_WORLD communicator which represents all the processs that PETSc knows about. Level: beginner Notes: By default PETSC_COMM_WORLD and MPI_COMM_WORLD are identical unless you wish to run PETSc on ONLY a subset of MPI_COMM_WORLD. In that case create your new (smaller) communicator, call it, say comm, and set PETSC_COMM_WORLD = comm BEFORE calling PetscInitialize() .seealso: PETSC_COMM_SELF M*/ extern MPI_Comm PETSC_COMM_WORLD; /*MC PETSC_COMM_SELF - This is always MPI_COMM_SELF Level: beginner .seealso: PETSC_COMM_WORLD M*/ #define PETSC_COMM_SELF MPI_COMM_SELF extern PETSC_DLLEXPORT PetscTruth PetscInitializeCalled; extern PETSC_DLLEXPORT PetscTruth PetscFinalizeCalled; EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSetHelpVersionFunctions(PetscErrorCode (*)(MPI_Comm),PetscErrorCode (*)(MPI_Comm)); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscCommDuplicate(MPI_Comm,MPI_Comm*,int*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscCommDestroy(MPI_Comm*); /*MC PetscMalloc - Allocates memory Synopsis: PetscErrorCode PetscMalloc(size_t m,void **result) Not Collective Input Parameter: . m - number of bytes to allocate Output Parameter: . result - memory allocated Level: beginner Notes: Memory is always allocated at least double aligned If you request memory of zero size it will allocate no space and assign the pointer to 0; PetscFree() will properly handle not freeing the null pointer. .seealso: PetscFree(), PetscNew() Concepts: memory allocation M*/ #define PetscMalloc(a,b) ((a != 0) ? (*PetscTrMalloc)((a),__LINE__,__FUNCT__,__FILE__,__SDIR__,(void**)(b)) : (*(b) = 0,0) ) /*MC PetscAddrAlign - Rounds up an address to PETSC_MEMALIGN alignment Synopsis: void *PetscAddrAlign(void *addr) Not Collective Input Parameters: . addr - address to align (any pointer type) Level: developer .seealso: PetscMallocAlign() Concepts: memory allocation M*/ #if defined PETSC_UINTPTR_T # define PetscAddrAlign(a) (void*)((((PETSC_UINTPTR_T)(a))+(PETSC_MEMALIGN-1)) & ~(PETSC_MEMALIGN-1)) #else # define PetscAddrAlign(a) (void*)(a) #endif /*MC PetscMalloc2 - Allocates 2 chunks of memory both aligned to PETSC_MEMALIGN Synopsis: PetscErrorCode PetscMalloc2(size_t m1,type, t1,void **r1,size_t m2,type t2,void **r2) Not Collective Input Parameter: + m1 - number of elements to allocate in 1st chunk (may be zero) . t1 - type of first memory elements . m2 - number of elements to allocate in 2nd chunk (may be zero) - t2 - type of second memory elements Output Parameter: + r1 - memory allocated in first chunk - r2 - memory allocated in second chunk Level: developer .seealso: PetscFree(), PetscNew(), PetscMalloc() Concepts: memory allocation M*/ #if defined(PETSC_USE_DEBUG) #define PetscMalloc2(m1,t1,r1,m2,t2,r2) (PetscMalloc((m1)*sizeof(t1),r1) || PetscMalloc((m2)*sizeof(t2),r2)) #else #define PetscMalloc2(m1,t1,r1,m2,t2,r2) ((*(r2) = 0,PetscMalloc((m1)*sizeof(t1)+(m2)*sizeof(t2)+(PETSC_MEMALIGN-1),r1)) \ || (*(r2) = (t2*)PetscAddrAlign(*(r1)+m1),0)) #endif /*MC PetscMalloc3 - Allocates 3 chunks of memory all aligned to PETSC_MEMALIGN Synopsis: PetscErrorCode PetscMalloc3(size_t m1,type, t1,void **r1,size_t m2,type t2,void **r2,size_t m3,type t3,void **r3) Not Collective Input Parameter: + m1 - number of elements to allocate in 1st chunk (may be zero) . t1 - type of first memory elements . m2 - number of elements to allocate in 2nd chunk (may be zero) . t2 - type of second memory elements . m3 - number of elements to allocate in 3rd chunk (may be zero) - t3 - type of third memory elements Output Parameter: + r1 - memory allocated in first chunk . r2 - memory allocated in second chunk - r3 - memory allocated in third chunk Level: developer .seealso: PetscFree(), PetscNew(), PetscMalloc(), PetscMalloc2(), PetscFree3() Concepts: memory allocation M*/ #if defined(PETSC_USE_DEBUG) #define PetscMalloc3(m1,t1,r1,m2,t2,r2,m3,t3,r3) (PetscMalloc((m1)*sizeof(t1),r1) || PetscMalloc((m2)*sizeof(t2),r2) || PetscMalloc((m3)*sizeof(t3),r3)) #else #define PetscMalloc3(m1,t1,r1,m2,t2,r2,m3,t3,r3) ((*(r2) = 0,*(r3) = 0,PetscMalloc((m1)*sizeof(t1)+(m2)*sizeof(t2)+(m3)*sizeof(t3)+2*(PETSC_MEMALIGN-1),r1)) \ || (*(r2) = (t2*)PetscAddrAlign(*(r1)+m1),*(r3) = (t3*)PetscAddrAlign(*(r2)+m2),0)) #endif /*MC PetscMalloc4 - Allocates 4 chunks of memory all aligned to PETSC_MEMALIGN Synopsis: PetscErrorCode PetscMalloc4(size_t m1,type, t1,void **r1,size_t m2,type t2,void **r2,size_t m3,type t3,void **r3,size_t m4,type t4,void **r4) Not Collective Input Parameter: + m1 - number of elements to allocate in 1st chunk (may be zero) . t1 - type of first memory elements . m2 - number of elements to allocate in 2nd chunk (may be zero) . t2 - type of second memory elements . m3 - number of elements to allocate in 3rd chunk (may be zero) . t3 - type of third memory elements . m4 - number of elements to allocate in 4th chunk (may be zero) - t4 - type of fourth memory elements Output Parameter: + r1 - memory allocated in first chunk . r2 - memory allocated in second chunk . r3 - memory allocated in third chunk - r4 - memory allocated in fourth chunk Level: developer .seealso: PetscFree(), PetscNew(), PetscMalloc(), PetscMalloc2(), PetscFree3(), PetscFree4() Concepts: memory allocation M*/ #if defined(PETSC_USE_DEBUG) #define PetscMalloc4(m1,t1,r1,m2,t2,r2,m3,t3,r3,m4,t4,r4) (PetscMalloc((m1)*sizeof(t1),r1) || PetscMalloc((m2)*sizeof(t2),r2) || PetscMalloc((m3)*sizeof(t3),r3) || PetscMalloc((m4)*sizeof(t4),r4)) #else #define PetscMalloc4(m1,t1,r1,m2,t2,r2,m3,t3,r3,m4,t4,r4) \ ((*(r2) = 0, *(r3) = 0, *(r4) = 0,PetscMalloc((m1)*sizeof(t1)+(m2)*sizeof(t2)+(m3)*sizeof(t3)+(m4)*sizeof(t4)+3*(PETSC_MEMALIGN-1),r1)) \ || (*(r2) = (t2*)PetscAddrAlign(*(r1)+m1),*(r3) = (t3*)PetscAddrAlign(*(r2)+m2),*(r4) = (t4*)PetscAddrAlign(*(r3)+m3),0)) #endif /*MC PetscMalloc5 - Allocates 5 chunks of memory all aligned to PETSC_MEMALIGN Synopsis: PetscErrorCode PetscMalloc5(size_t m1,type, t1,void **r1,size_t m2,type t2,void **r2,size_t m3,type t3,void **r3,size_t m4,type t4,void **r4,size_t m5,type t5,void **r5) Not Collective Input Parameter: + m1 - number of elements to allocate in 1st chunk (may be zero) . t1 - type of first memory elements . m2 - number of elements to allocate in 2nd chunk (may be zero) . t2 - type of second memory elements . m3 - number of elements to allocate in 3rd chunk (may be zero) . t3 - type of third memory elements . m4 - number of elements to allocate in 4th chunk (may be zero) . t4 - type of fourth memory elements . m5 - number of elements to allocate in 5th chunk (may be zero) - t5 - type of fifth memory elements Output Parameter: + r1 - memory allocated in first chunk . r2 - memory allocated in second chunk . r3 - memory allocated in third chunk . r4 - memory allocated in fourth chunk - r5 - memory allocated in fifth chunk Level: developer .seealso: PetscFree(), PetscNew(), PetscMalloc(), PetscMalloc2(), PetscFree3(), PetscFree4(), PetscFree5() Concepts: memory allocation M*/ #if defined(PETSC_USE_DEBUG) #define PetscMalloc5(m1,t1,r1,m2,t2,r2,m3,t3,r3,m4,t4,r4,m5,t5,r5) (PetscMalloc((m1)*sizeof(t1),r1) || PetscMalloc((m2)*sizeof(t2),r2) || PetscMalloc((m3)*sizeof(t3),r3) || PetscMalloc((m4)*sizeof(t4),r4) || PetscMalloc((m5)*sizeof(t5),r5)) #else #define PetscMalloc5(m1,t1,r1,m2,t2,r2,m3,t3,r3,m4,t4,r4,m5,t5,r5) \ ((*(r2) = 0, *(r3) = 0, *(r4) = 0,*(r5) = 0,PetscMalloc((m1)*sizeof(t1)+(m2)*sizeof(t2)+(m3)*sizeof(t3)+(m4)*sizeof(t4)+(m5)*sizeof(t5)+4*(PETSC_MEMALIGN-1),r1)) \ || (*(r2) = (t2*)PetscAddrAlign(*(r1)+m1),*(r3) = (t3*)PetscAddrAlign(*(r2)+m2),*(r4) = (t4*)PetscAddrAlign(*(r3)+m3),*(r5) = (t5*)PetscAddrAlign(*(r4)+m4),0)) #endif /*MC PetscMalloc6 - Allocates 6 chunks of memory all aligned to PETSC_MEMALIGN Synopsis: PetscErrorCode PetscMalloc6(size_t m1,type, t1,void **r1,size_t m2,type t2,void **r2,size_t m3,type t3,void **r3,size_t m4,type t4,void **r4,size_t m5,type t5,void **r5,size_t m6,type t6,void **r6) Not Collective Input Parameter: + m1 - number of elements to allocate in 1st chunk (may be zero) . t1 - type of first memory elements . m2 - number of elements to allocate in 2nd chunk (may be zero) . t2 - type of second memory elements . m3 - number of elements to allocate in 3rd chunk (may be zero) . t3 - type of third memory elements . m4 - number of elements to allocate in 4th chunk (may be zero) . t4 - type of fourth memory elements . m5 - number of elements to allocate in 5th chunk (may be zero) . t5 - type of fifth memory elements . m6 - number of elements to allocate in 6th chunk (may be zero) - t6 - type of sixth memory elements Output Parameter: + r1 - memory allocated in first chunk . r2 - memory allocated in second chunk . r3 - memory allocated in third chunk . r4 - memory allocated in fourth chunk . r5 - memory allocated in fifth chunk - r6 - memory allocated in sixth chunk Level: developer .seealso: PetscFree(), PetscNew(), PetscMalloc(), PetscMalloc2(), PetscFree3(), PetscFree4(), PetscFree5(), PetscFree6() Concepts: memory allocation M*/ #if defined(PETSC_USE_DEBUG) #define PetscMalloc6(m1,t1,r1,m2,t2,r2,m3,t3,r3,m4,t4,r4,m5,t5,r5,m6,t6,r6) (PetscMalloc((m1)*sizeof(t1),r1) || PetscMalloc((m2)*sizeof(t2),r2) || PetscMalloc((m3)*sizeof(t3),r3) || PetscMalloc((m4)*sizeof(t4),r4) || PetscMalloc((m5)*sizeof(t5),r5) || PetscMalloc((m6)*sizeof(t6),r6)) #else #define PetscMalloc6(m1,t1,r1,m2,t2,r2,m3,t3,r3,m4,t4,r4,m5,t5,r5,m6,t6,r6) \ ((*(r2) = 0, *(r3) = 0, *(r4) = 0,*(r5) = 0,*(r6) = 0,PetscMalloc((m1)*sizeof(t1)+(m2)*sizeof(t2)+(m3)*sizeof(t3)+(m4)*sizeof(t4)+(m5)*sizeof(t5)+(m6)*sizeof(t6)+5*(PETSC_MEMALIGN-1),r1)) \ || (*(r2) = (t2*)PetscAddrAlign(*(r1)+m1),*(r3) = (t3*)PetscAddrAlign(*(r2)+m2),*(r4) = (t4*)PetscAddrAlign(*(r3)+m3),*(r5) = (t5*)PetscAddrAlign(*(r4)+m4),*(r6) = (t6*)PetscAddrAlign(*(r5)+m5),0)) #endif /*MC PetscMalloc7 - Allocates 7 chunks of memory all aligned to PETSC_MEMALIGN Synopsis: PetscErrorCode PetscMalloc7(size_t m1,type, t1,void **r1,size_t m2,type t2,void **r2,size_t m3,type t3,void **r3,size_t m4,type t4,void **r4,size_t m5,type t5,void **r5,size_t m6,type t6,void **r6,size_t m7,type t7,void **r7) Not Collective Input Parameter: + m1 - number of elements to allocate in 1st chunk (may be zero) . t1 - type of first memory elements . m2 - number of elements to allocate in 2nd chunk (may be zero) . t2 - type of second memory elements . m3 - number of elements to allocate in 3rd chunk (may be zero) . t3 - type of third memory elements . m4 - number of elements to allocate in 4th chunk (may be zero) . t4 - type of fourth memory elements . m5 - number of elements to allocate in 5th chunk (may be zero) . t5 - type of fifth memory elements . m6 - number of elements to allocate in 6th chunk (may be zero) . t6 - type of sixth memory elements . m7 - number of elements to allocate in 7th chunk (may be zero) - t7 - type of sixth memory elements Output Parameter: + r1 - memory allocated in first chunk . r2 - memory allocated in second chunk . r3 - memory allocated in third chunk . r4 - memory allocated in fourth chunk . r5 - memory allocated in fifth chunk . r6 - memory allocated in sixth chunk - r7 - memory allocated in seventh chunk Level: developer .seealso: PetscFree(), PetscNew(), PetscMalloc(), PetscMalloc2(), PetscFree3(), PetscFree4(), PetscFree5(), PetscFree6(), PetscFree7() Concepts: memory allocation M*/ #if defined(PETSC_USE_DEBUG) #define PetscMalloc7(m1,t1,r1,m2,t2,r2,m3,t3,r3,m4,t4,r4,m5,t5,r5,m6,t6,r6,m7,t7,r7) (PetscMalloc((m1)*sizeof(t1),r1) || PetscMalloc((m2)*sizeof(t2),r2) || PetscMalloc((m3)*sizeof(t3),r3) || PetscMalloc((m4)*sizeof(t4),r4) || PetscMalloc((m5)*sizeof(t5),r5) || PetscMalloc((m6)*sizeof(t6),r6) || PetscMalloc((m7)*sizeof(t7),r7)) #else #define PetscMalloc7(m1,t1,r1,m2,t2,r2,m3,t3,r3,m4,t4,r4,m5,t5,r5,m6,t6,r6,m7,t7,r7) \ ((*(r2) = 0, *(r3) = 0, *(r4) = 0,*(r5) = 0,*(r6) = 0,*(r7) = 0,PetscMalloc((m1)*sizeof(t1)+(m2)*sizeof(t2)+(m3)*sizeof(t3)+(m4)*sizeof(t4)+(m5)*sizeof(t5)+(m6)*sizeof(t6)+(m7)*sizeof(t7)+6*(PETSC_MEMALIGN-1),r1)) \ || (*(r2) = (t2*)PetscAddrAlign(*(r1)+m1),*(r3) = (t3*)PetscAddrAlign(*(r2)+m2),*(r4) = (t4*)PetscAddrAlign(*(r3)+m3),*(r5) = (t5*)PetscAddrAlign(*(r4)+m4),*(r6) = (t6*)PetscAddrAlign(*(r5)+m5),*(r7) = (t7*)PetscAddrAlign(*(r6)+m6),0)) #endif /*MC PetscNew - Allocates memory of a particular type, zeros the memory! Aligned to PETSC_MEMALIGN Synopsis: PetscErrorCode PetscNew(struct type,((type *))result) Not Collective Input Parameter: . type - structure name of space to be allocated. Memory of size sizeof(type) is allocated Output Parameter: . result - memory allocated Level: beginner .seealso: PetscFree(), PetscMalloc() Concepts: memory allocation M*/ #define PetscNew(A,b) (PetscMalloc(sizeof(A),(b)) || PetscMemzero(*(b),sizeof(A))) #define PetscNewLog(o,A,b) (PetscNew(A,b) || ((o) ? PetscLogObjectMemory(o,sizeof(A)) : 0)) /*MC PetscFree - Frees memory Synopsis: PetscErrorCode PetscFree(void *memory) Not Collective Input Parameter: . memory - memory to free (the pointer is ALWAYS set to 0 upon sucess) Level: beginner Notes: Memory must have been obtained with PetscNew() or PetscMalloc() .seealso: PetscNew(), PetscMalloc(), PetscFreeVoid() Concepts: memory allocation M*/ #define PetscFree(a) ((a) ? ((*PetscTrFree)((void*)(a),__LINE__,__FUNCT__,__FILE__,__SDIR__) || ((a = 0),0)) : 0) /*MC PetscFreeVoid - Frees memory Synopsis: void PetscFreeVoid(void *memory) Not Collective Input Parameter: . memory - memory to free Level: beginner Notes: This is different from PetscFree() in that no error code is returned .seealso: PetscFree(), PetscNew(), PetscMalloc() Concepts: memory allocation M*/ #define PetscFreeVoid(a) ((*PetscTrFree)((a),__LINE__,__FUNCT__,__FILE__,__SDIR__),(a) = 0) /*MC PetscFree2 - Frees 2 chunks of memory obtained with PetscMalloc2() Synopsis: PetscErrorCode PetscFree2(void *memory1,void *memory2) Not Collective Input Parameter: + memory1 - memory to free - memory2 - 2nd memory to free Level: developer Notes: Memory must have been obtained with PetscMalloc2() .seealso: PetscNew(), PetscMalloc(), PetscMalloc2(), PetscFree() Concepts: memory allocation M*/ #if defined(PETSC_USE_DEBUG) #define PetscFree2(m1,m2) (PetscFree(m2) || PetscFree(m1)) #else #define PetscFree2(m1,m2) (PetscFree(m1)) #endif /*MC PetscFree3 - Frees 3 chunks of memory obtained with PetscMalloc3() Synopsis: PetscErrorCode PetscFree3(void *memory1,void *memory2,void *memory3) Not Collective Input Parameter: + memory1 - memory to free . memory2 - 2nd memory to free - memory3 - 3rd memory to free Level: developer Notes: Memory must have been obtained with PetscMalloc3() .seealso: PetscNew(), PetscMalloc(), PetscMalloc2(), PetscFree(), PetscMalloc3() Concepts: memory allocation M*/ #if defined(PETSC_USE_DEBUG) #define PetscFree3(m1,m2,m3) (PetscFree(m3) || PetscFree(m2) || PetscFree(m1)) #else #define PetscFree3(m1,m2,m3) (PetscFree(m1)) #endif /*MC PetscFree4 - Frees 4 chunks of memory obtained with PetscMalloc4() Synopsis: PetscErrorCode PetscFree4(void *m1,void *m2,void *m3,void *m4) Not Collective Input Parameter: + m1 - memory to free . m2 - 2nd memory to free . m3 - 3rd memory to free - m4 - 4th memory to free Level: developer Notes: Memory must have been obtained with PetscMalloc4() .seealso: PetscNew(), PetscMalloc(), PetscMalloc2(), PetscFree(), PetscMalloc3(), PetscMalloc4() Concepts: memory allocation M*/ #if defined(PETSC_USE_DEBUG) #define PetscFree4(m1,m2,m3,m4) (PetscFree(m4) || PetscFree(m3) || PetscFree(m2) || PetscFree(m1)) #else #define PetscFree4(m1,m2,m3,m4) (PetscFree(m1)) #endif /*MC PetscFree5 - Frees 5 chunks of memory obtained with PetscMalloc5() Synopsis: PetscErrorCode PetscFree5(void *m1,void *m2,void *m3,void *m4,void *m5) Not Collective Input Parameter: + m1 - memory to free . m2 - 2nd memory to free . m3 - 3rd memory to free . m4 - 4th memory to free - m5 - 5th memory to free Level: developer Notes: Memory must have been obtained with PetscMalloc5() .seealso: PetscNew(), PetscMalloc(), PetscMalloc2(), PetscFree(), PetscMalloc3(), PetscMalloc4(), PetscMalloc5() Concepts: memory allocation M*/ #if defined(PETSC_USE_DEBUG) #define PetscFree5(m1,m2,m3,m4,m5) (PetscFree(m5) || PetscFree(m4) || PetscFree(m3) || PetscFree(m2) || PetscFree(m1)) #else #define PetscFree5(m1,m2,m3,m4,m5) (PetscFree(m1)) #endif /*MC PetscFree6 - Frees 6 chunks of memory obtained with PetscMalloc6() Synopsis: PetscErrorCode PetscFree6(void *m1,void *m2,void *m3,void *m4,void *m5,void *m6) Not Collective Input Parameter: + m1 - memory to free . m2 - 2nd memory to free . m3 - 3rd memory to free . m4 - 4th memory to free . m5 - 5th memory to free - m6 - 6th memory to free Level: developer Notes: Memory must have been obtained with PetscMalloc6() .seealso: PetscNew(), PetscMalloc(), PetscMalloc2(), PetscFree(), PetscMalloc3(), PetscMalloc4(), PetscMalloc5(), PetscMalloc6() Concepts: memory allocation M*/ #if defined(PETSC_USE_DEBUG) #define PetscFree6(m1,m2,m3,m4,m5,m6) (PetscFree(m6) || PetscFree(m5) || PetscFree(m4) || PetscFree(m3) || PetscFree(m2) || PetscFree(m1)) #else #define PetscFree6(m1,m2,m3,m4,m5,m6) (PetscFree(m1)) #endif /*MC PetscFree7 - Frees 7 chunks of memory obtained with PetscMalloc7() Synopsis: PetscErrorCode PetscFree7(void *m1,void *m2,void *m3,void *m4,void *m5,void *m6,void *m7) Not Collective Input Parameter: + m1 - memory to free . m2 - 2nd memory to free . m3 - 3rd memory to free . m4 - 4th memory to free . m5 - 5th memory to free . m6 - 6th memory to free - m7 - 7th memory to free Level: developer Notes: Memory must have been obtained with PetscMalloc7() .seealso: PetscNew(), PetscMalloc(), PetscMalloc2(), PetscFree(), PetscMalloc3(), PetscMalloc4(), PetscMalloc5(), PetscMalloc6(), PetscMalloc7() Concepts: memory allocation M*/ #if defined(PETSC_USE_DEBUG) #define PetscFree7(m1,m2,m3,m4,m5,m6,m7) (PetscFree(m7) || PetscFree(m6) || PetscFree(m5) || PetscFree(m4) || PetscFree(m3) || PetscFree(m2) || PetscFree(m1)) #else #define PetscFree7(m1,m2,m3,m4,m5,m6,m7) (PetscFree(m1)) #endif EXTERN PETSC_DLLEXPORT PetscErrorCode (*PetscTrMalloc)(size_t,int,const char[],const char[],const char[],void**); EXTERN PETSC_DLLEXPORT PetscErrorCode (*PetscTrFree)(void*,int,const char[],const char[],const char[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscMallocSet(PetscErrorCode (*)(size_t,int,const char[],const char[],const char[],void**),PetscErrorCode (*)(void*,int,const char[],const char[],const char[])); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscMallocClear(void); /* Routines for tracing memory corruption/bleeding with default PETSc memory allocation */ EXTERN PetscErrorCode PETSC_DLLEXPORT PetscMallocDump(FILE *); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscMallocDumpLog(FILE *); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscMallocGetCurrentUsage(PetscLogDouble *); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscMallocGetMaximumUsage(PetscLogDouble *); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscMallocDebug(PetscTruth); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscMallocValidate(int,const char[],const char[],const char[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscMallocSetDumpLog(void); /* Variable type where we stash PETSc object pointers in Fortran. On most machines size(pointer) == sizeof(long) - except windows where its sizeof(long long) */ #if (PETSC_SIZEOF_VOID_P) == (PETSC_SIZEOF_LONG) #define PetscFortranAddr long #elif (PETSC_SIZEOF_VOID_P) == (PETSC_SIZEOF_LONG_LONG) #define PetscFortranAddr long long #else #error "Unknown size for PetscFortranAddr! Send us a bugreport at petsc-maint@mcs.anl.gov" #endif /*E PetscDataType - Used for handling different basic data types. Level: beginner Developer comment: It would be nice if we could always just use MPI Datatypes, why can we not? .seealso: PetscBinaryRead(), PetscBinaryWrite(), PetscDataTypeToMPIDataType(), PetscDataTypeGetSize() E*/ typedef enum {PETSC_INT = 0,PETSC_DOUBLE = 1,PETSC_COMPLEX = 2, PETSC_LONG = 3 ,PETSC_SHORT = 4,PETSC_FLOAT = 5, PETSC_CHAR = 6,PETSC_LOGICAL = 7,PETSC_ENUM = 8,PETSC_TRUTH=9, PETSC_LONG_DOUBLE = 10, PETSC_QD_DD = 11} PetscDataType; extern const char *PetscDataTypes[]; #if defined(PETSC_USE_COMPLEX) #define PETSC_SCALAR PETSC_COMPLEX #else #if defined(PETSC_USE_SCALAR_SINGLE) #define PETSC_SCALAR PETSC_FLOAT #elif defined(PETSC_USE_SCALAR_LONG_DOUBLE) #define PETSC_SCALAR PETSC_LONG_DOUBLE #elif defined(PETSC_USE_SCALAR_INT) #define PETSC_SCALAR PETSC_INT #elif defined(PETSC_USE_SCALAR_QD_DD) #define PETSC_SCALAR PETSC_QD_DD #else #define PETSC_SCALAR PETSC_DOUBLE #endif #endif #if defined(PETSC_USE_SCALAR_SINGLE) #define PETSC_REAL PETSC_FLOAT #elif defined(PETSC_USE_SCALAR_LONG_DOUBLE) #define PETSC_REAL PETSC_LONG_DOUBLE #elif defined(PETSC_USE_SCALAR_INT) #define PETSC_REAL PETSC_INT #elif defined(PETSC_USE_SCALAR_QD_DD) #define PETSC_REAL PETSC_QD_DD #else #define PETSC_REAL PETSC_DOUBLE #endif #define PETSC_FORTRANADDR PETSC_LONG EXTERN PetscErrorCode PETSC_DLLEXPORT PetscDataTypeToMPIDataType(PetscDataType,MPI_Datatype*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscMPIDataTypeToPetscDataType(MPI_Datatype,PetscDataType*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscDataTypeGetSize(PetscDataType,size_t*); /* Basic memory and string operations. These are usually simple wrappers around the basic Unix system calls, but a few of them have additional functionality and/or error checking. */ EXTERN PetscErrorCode PETSC_DLLEXPORT PetscBitMemcpy(void*,PetscInt,const void*,PetscInt,PetscInt,PetscDataType); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscMemmove(void*,void *,size_t); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscMemcmp(const void*,const void*,size_t,PetscTruth *); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscStrlen(const char[],size_t*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscStrToArray(const char[],int*,char ***); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscStrToArrayDestroy(int,char **); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscStrcmp(const char[],const char[],PetscTruth *); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscStrgrt(const char[],const char[],PetscTruth *); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscStrcasecmp(const char[],const char[],PetscTruth*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscStrncmp(const char[],const char[],size_t,PetscTruth*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscStrcpy(char[],const char[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscStrcat(char[],const char[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscStrncat(char[],const char[],size_t); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscStrncpy(char[],const char[],size_t); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscStrchr(const char[],char,char *[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscStrtolower(char[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscStrrchr(const char[],char,char *[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscStrstr(const char[],const char[],char *[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscStrrstr(const char[],const char[],char *[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscStrallocpy(const char[],char *[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscStrreplace(MPI_Comm,const char[],char[],size_t); /*S PetscToken - 'Token' used for managing tokenizing strings Level: intermediate .seealso: PetscTokenCreate(), PetscTokenFind(), PetscTokenDestroy() S*/ typedef struct _p_PetscToken* PetscToken; EXTERN PetscErrorCode PETSC_DLLEXPORT PetscTokenCreate(const char[],const char,PetscToken*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscTokenFind(PetscToken,char *[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscTokenDestroy(PetscToken); /* These are MPI operations for MPI_Allreduce() etc */ EXTERN PETSC_DLLEXPORT MPI_Op PetscMaxSum_Op; #if defined(PETSC_USE_COMPLEX) && !defined(PETSC_HAVE_MPI_C_DOUBLE_COMPLEX) EXTERN PETSC_DLLEXPORT MPI_Op MPIU_SUM; #else #define MPIU_SUM MPI_SUM #endif EXTERN PetscErrorCode PETSC_DLLEXPORT PetscMaxSum(MPI_Comm,const PetscInt[],PetscInt*,PetscInt*); /*S PetscObject - any PETSc object, PetscViewer, Mat, Vec, KSP etc Level: beginner Note: This is the base class from which all objects appear. .seealso: PetscObjectDestroy(), PetscObjectView(), PetscObjectGetName(), PetscObjectSetName(), PetscObjectReference(), PetscObjectDereferenc() S*/ typedef struct _p_PetscObject* PetscObject; /*S PetscFList - Linked list of functions, possibly stored in dynamic libraries, accessed by string name Level: advanced .seealso: PetscFListAdd(), PetscFListDestroy() S*/ typedef struct _n_PetscFList *PetscFList; /*E PetscFileMode - Access mode for a file. Level: beginner FILE_MODE_READ - open a file at its beginning for reading FILE_MODE_WRITE - open a file at its beginning for writing (will create if the file does not exist) FILE_MODE_APPEND - open a file at end for writing FILE_MODE_UPDATE - open a file for updating, meaning for reading and writing FILE_MODE_APPEND_UPDATE - open a file for updating, meaning for reading and writing, at the end .seealso: PetscViewerFileSetMode() E*/ typedef enum {FILE_MODE_READ, FILE_MODE_WRITE, FILE_MODE_APPEND, FILE_MODE_UPDATE, FILE_MODE_APPEND_UPDATE} PetscFileMode; #include "petscviewer.h" #include "petscoptions.h" #define PETSC_SMALLEST_CLASSID 1211211 extern PETSC_DLLEXPORT PetscClassId PETSC_LARGEST_CLASSID; extern PETSC_DLLEXPORT PetscClassId PETSC_OBJECT_CLASSID; EXTERN PetscErrorCode PETSC_DLLEXPORT PetscClassIdRegister(const char[],PetscClassId *); /* Routines that get memory usage information from the OS */ EXTERN PetscErrorCode PETSC_DLLEXPORT PetscMemoryGetCurrentUsage(PetscLogDouble *); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscMemoryGetMaximumUsage(PetscLogDouble *); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscMemorySetGetMaximumUsage(void); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscMemoryShowUsage(PetscViewer,const char[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscInfoAllow(PetscTruth,const char []); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscGetTime(PetscLogDouble*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscGetCPUTime(PetscLogDouble*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSleep(PetscReal); /* Initialization of PETSc */ EXTERN PetscErrorCode PETSC_DLLEXPORT PetscInitialize(int*,char***,const char[],const char[]); PetscPolymorphicSubroutine(PetscInitialize,(int *argc,char ***args),(argc,args,PETSC_NULL,PETSC_NULL)) EXTERN PetscErrorCode PETSC_DLLEXPORT PetscInitializeNoArguments(void); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscInitialized(PetscTruth *); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscFinalized(PetscTruth *); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscFinalize(void); EXTERN PetscErrorCode PetscInitializeFortran(void); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscGetArgs(int*,char ***); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscGetArguments(char ***); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscFreeArguments(char **); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscEnd(void); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSysInitializePackage(const char[]); extern MPI_Comm PETSC_COMM_LOCAL_WORLD; EXTERN PetscErrorCode PETSC_DLLEXPORT PetscOpenMPMerge(PetscMPIInt,PetscErrorCode (*)(void*),void*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscOpenMPSpawn(PetscMPIInt); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscOpenMPFinalize(void); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscOpenMPRun(MPI_Comm,PetscErrorCode (*)(MPI_Comm,void *),void*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscOpenMPRunCtx(MPI_Comm,PetscErrorCode (*)(MPI_Comm,void*,void *),void*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscOpenMPFree(MPI_Comm,void*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscOpenMPMalloc(MPI_Comm,size_t,void**); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscPythonInitialize(const char[],const char[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscPythonFinalize(void); /* These are so that in extern C code we can caste function pointers to non-extern C function pointers. Since the regular C++ code expects its function pointers to be C++. */ typedef void (**PetscVoidStarFunction)(void); typedef void (*PetscVoidFunction)(void); typedef PetscErrorCode (*PetscErrorCodeFunction)(void); /* PetscTryMethod - Queries an object for a method, if it exists then calls it. These are intended to be used only inside PETSc functions. Level: developer .seealso: PetscUseMethod() */ #define PetscTryMethod(obj,A,B,C) \ 0;{ PetscErrorCode (*f)B, __ierr; \ __ierr = PetscObjectQueryFunction((PetscObject)obj,A,(PetscVoidStarFunction)&f);CHKERRQ(__ierr); \ if (f) {__ierr = (*f)C;CHKERRQ(__ierr);}\ } /* PetscUseMethod - Queries an object for a method, if it exists then calls it, otherwise generates an error. These are intended to be used only inside PETSc functions. Level: developer .seealso: PetscTryMethod() */ #define PetscUseMethod(obj,A,B,C) \ 0;{ PetscErrorCode (*f)B, __ierr; \ __ierr = PetscObjectQueryFunction((PetscObject)obj,A,(PetscVoidStarFunction)&f);CHKERRQ(__ierr); \ if (f) {__ierr = (*f)C;CHKERRQ(__ierr);}\ else SETERRQ1(((PetscObject)A)->comm,PETSC_ERR_SUP,"Cannot locate function %s in object",A); \ } /* Functions that can act on any PETSc object. */ EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectCreate(MPI_Comm,PetscObject*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectCreateGeneric(MPI_Comm, PetscClassId, const char [], PetscObject *); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectDestroy(PetscObject); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectGetComm(PetscObject,MPI_Comm *); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectGetClassId(PetscObject,PetscClassId *); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectSetType(PetscObject,const char []); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectGetType(PetscObject,const char *[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectSetName(PetscObject,const char[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectGetName(PetscObject,const char*[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectSetTabLevel(PetscObject,PetscInt); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectGetTabLevel(PetscObject,PetscInt*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectIncrementTabLevel(PetscObject,PetscObject,PetscInt); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectReference(PetscObject); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectGetReference(PetscObject,PetscInt*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectDereference(PetscObject); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectGetNewTag(PetscObject,PetscMPIInt *); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectView(PetscObject,PetscViewer); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectCompose(PetscObject,const char[],PetscObject); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectQuery(PetscObject,const char[],PetscObject *); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectComposeFunction(PetscObject,const char[],const char[],void (*)(void)); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectSetFromOptions(PetscObject); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectSetUp(PetscObject); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscCommGetNewTag(MPI_Comm,PetscMPIInt *); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectAddOptionsHandler(PetscObject,PetscErrorCode (*)(PetscObject,void*),PetscErrorCode (*)(PetscObject,void*),void*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectProcessOptionsHandlers(PetscObject); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectDestroyOptionsHandlers(PetscObject); /*MC PetscObjectComposeFunctionDynamic - Associates a function with a given PETSc object. Synopsis: PetscErrorCode PetscObjectComposeFunctionDynamic(PetscObject obj,const char name[],const char fname[],void *ptr) Logically Collective on PetscObject Input Parameters: + obj - the PETSc object; this must be cast with a (PetscObject), for example, PetscObjectCompose((PetscObject)mat,...); . name - name associated with the child function . fname - name of the function - ptr - function pointer (or PETSC_NULL if using dynamic libraries) Level: advanced Notes: To remove a registered routine, pass in a PETSC_NULL rname and fnc(). PetscObjectComposeFunctionDynamic() can be used with any PETSc object (such as Mat, Vec, KSP, SNES, etc.) or any user-provided object. The composed function must be wrapped in a EXTERN_C_BEGIN/END for this to work in C++/complex with dynamic link libraries (./configure options --with-shared-libraries --with-dynamic-loading) enabled. Concepts: objects^composing functions Concepts: composing functions Concepts: functions^querying Concepts: objects^querying Concepts: querying objects .seealso: PetscObjectQueryFunction() M*/ #if defined(PETSC_USE_DYNAMIC_LIBRARIES) #define PetscObjectComposeFunctionDynamic(a,b,c,d) PetscObjectComposeFunction(a,b,c,0) #else #define PetscObjectComposeFunctionDynamic(a,b,c,d) PetscObjectComposeFunction(a,b,c,(PetscVoidFunction)(d)) #endif EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectQueryFunction(PetscObject,const char[],void (**)(void)); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectSetOptionsPrefix(PetscObject,const char[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectAppendOptionsPrefix(PetscObject,const char[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectPrependOptionsPrefix(PetscObject,const char[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectGetOptionsPrefix(PetscObject,const char*[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectPublish(PetscObject); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectChangeTypeName(PetscObject,const char[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectRegisterDestroy(PetscObject); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectRegisterDestroyAll(void); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscObjectName(PetscObject); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscTypeCompare(PetscObject,const char[],PetscTruth*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscRegisterFinalize(PetscErrorCode (*)(void)); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscRegisterFinalizeAll(void); /* Defines PETSc error handling. */ #include "petscerror.h" /*S PetscOList - Linked list of PETSc objects, each accessable by string name Level: developer Notes: Used by PetscObjectCompose() and PetscObjectQuery() .seealso: PetscOListAdd(), PetscOListDestroy(), PetscOListFind(), PetscObjectCompose(), PetscObjectQuery() S*/ typedef struct _n_PetscOList *PetscOList; EXTERN PetscErrorCode PETSC_DLLEXPORT PetscOListDestroy(PetscOList); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscOListFind(PetscOList,const char[],PetscObject*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscOListReverseFind(PetscOList,PetscObject,char**); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscOListAdd(PetscOList *,const char[],PetscObject); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscOListDuplicate(PetscOList,PetscOList *); /* Dynamic library lists. Lists of names of routines in objects or in dynamic link libraries that will be loaded as needed. */ EXTERN PetscErrorCode PETSC_DLLEXPORT PetscFListAdd(PetscFList*,const char[],const char[],void (*)(void)); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscFListDestroy(PetscFList*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscFListFind(PetscFList,MPI_Comm,const char[],void (**)(void)); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscFListPrintTypes(MPI_Comm,FILE*,const char[],const char[],const char[],const char[],PetscFList,const char[]); #if defined(PETSC_USE_DYNAMIC_LIBRARIES) #define PetscFListAddDynamic(a,b,p,c) PetscFListAdd(a,b,p,0) #else #define PetscFListAddDynamic(a,b,p,c) PetscFListAdd(a,b,p,(void (*)(void))c) #endif EXTERN PetscErrorCode PETSC_DLLEXPORT PetscFListDuplicate(PetscFList,PetscFList *); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscFListView(PetscFList,PetscViewer); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscFListConcat(const char [],const char [],char []); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscFListGet(PetscFList,char ***,int*); /*S PetscDLLibrary - Linked list of dynamics libraries to search for functions Level: advanced --with-shared-libraries --with-dynamic-loading must be used with ./configure to use dynamic libraries .seealso: PetscDLLibraryOpen() S*/ typedef struct _n_PetscDLLibrary *PetscDLLibrary; extern PETSC_DLLEXPORT PetscDLLibrary DLLibrariesLoaded; EXTERN PetscErrorCode PETSC_DLLEXPORT PetscDLLibraryAppend(MPI_Comm,PetscDLLibrary *,const char[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscDLLibraryPrepend(MPI_Comm,PetscDLLibrary *,const char[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscDLLibrarySym(MPI_Comm,PetscDLLibrary *,const char[],const char[],void **); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscDLLibraryPrintPath(PetscDLLibrary); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscDLLibraryRetrieve(MPI_Comm,const char[],char *,size_t,PetscTruth *); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscDLLibraryOpen(MPI_Comm,const char[],PetscDLLibrary *); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscDLLibraryClose(PetscDLLibrary); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscDLLibraryCCAAppend(MPI_Comm,PetscDLLibrary *,const char[]); /* PetscFwk support. Needs to be documented. Logically it is an extension of PetscDLLXXX, PetscObjectCompose, etc. */ #include "petscfwk.h" /* Useful utility routines */ EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSplitOwnership(MPI_Comm,PetscInt*,PetscInt*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSplitOwnershipBlock(MPI_Comm,PetscInt,PetscInt*,PetscInt*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSequentialPhaseBegin(MPI_Comm,PetscMPIInt); PetscPolymorphicSubroutine(PetscSequentialPhaseBegin,(MPI_Comm comm),(comm,1)) PetscPolymorphicSubroutine(PetscSequentialPhaseBegin,(void),(PETSC_COMM_WORLD,1)) EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSequentialPhaseEnd(MPI_Comm,PetscMPIInt); PetscPolymorphicSubroutine(PetscSequentialPhaseEnd,(MPI_Comm comm),(comm,1)) PetscPolymorphicSubroutine(PetscSequentialPhaseEnd,(void),(PETSC_COMM_WORLD,1)) EXTERN PetscErrorCode PETSC_DLLEXPORT PetscBarrier(PetscObject); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscMPIDump(FILE*); /* PetscNot - negates a logical type value and returns result as a PetscTruth Notes: This is useful in cases like $ int *a; $ PetscTruth flag = PetscNot(a) where !a does not return a PetscTruth because we cannot provide a cast from int to PetscTruth in C. */ #define PetscNot(a) ((a) ? PETSC_FALSE : PETSC_TRUE) /* Defines basic graphics available from PETSc. */ #include "petscdraw.h" /* Defines the base data structures for all PETSc objects */ #include "private/petscimpl.h" /* Defines PETSc profiling. */ #include "petsclog.h" /* For locking, unlocking and destroying AMS memories associated with PETSc objects. ams.h is included in petscviewer.h */ #if defined(PETSC_HAVE_AMS) extern PetscTruth PetscAMSPublishAll; #define PetscPublishAll(v) (PetscAMSPublishAll ? PetscObjectPublish((PetscObject)v) : 0) #define PetscObjectTakeAccess(obj) ((((PetscObject)(obj))->amem == -1) ? 0 : AMS_Memory_take_access(((PetscObject)(obj))->amem)) #define PetscObjectGrantAccess(obj) ((((PetscObject)(obj))->amem == -1) ? 0 : AMS_Memory_grant_access(((PetscObject)(obj))->amem)) #define PetscObjectDepublish(obj) ((((PetscObject)(obj))->amem == -1) ? 0 : AMS_Memory_destroy(((PetscObject)(obj))->amem));((PetscObject)(obj))->amem = -1; #else #define PetscPublishAll(v) 0 #define PetscObjectTakeAccess(obj) 0 #define PetscObjectGrantAccess(obj) 0 #define PetscObjectDepublish(obj) 0 #endif /* Simple PETSc parallel IO for ASCII printing */ EXTERN PetscErrorCode PETSC_DLLEXPORT PetscFixFilename(const char[],char[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscFOpen(MPI_Comm,const char[],const char[],FILE**); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscFClose(MPI_Comm,FILE*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscFPrintf(MPI_Comm,FILE*,const char[],...) PETSC_PRINTF_FORMAT_CHECK(3,4); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscPrintf(MPI_Comm,const char[],...) PETSC_PRINTF_FORMAT_CHECK(2,3); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSNPrintf(char*,size_t,const char [],...); /* These are used internally by PETSc ASCII IO routines*/ #include EXTERN PetscErrorCode PETSC_DLLEXPORT PetscVSNPrintf(char*,size_t,const char[],int*,va_list); EXTERN PetscErrorCode PETSC_DLLEXPORT (*PetscVFPrintf)(FILE*,const char[],va_list); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscVFPrintfDefault(FILE*,const char[],va_list); /*MC PetscErrorPrintf - Prints error messages. Synopsis: PetscErrorCode (*PetscErrorPrintf)(const char format[],...); Not Collective Input Parameters: . format - the usual printf() format string Options Database Keys: + -error_output_stdout - cause error messages to be printed to stdout instead of the (default) stderr - -error_output_none to turn off all printing of error messages (does not change the way the error is handled.) Notes: Use $ PetscErrorPrintf = PetscErrorPrintfNone; to turn off all printing of error messages (does not change the way the $ error is handled.) and $ PetscErrorPrintf = PetscErrorPrintfDefault; to turn it back on Use PETSC_STDERR = FILE* obtained from a file open etc. to have stderr printed to the file. PETSC_STDOUT = FILE* obtained from a file open etc. to have stdout printed to the file. Use PetscPushErrorHandler() to provide your own error handler that determines what kind of messages to print Level: developer Fortran Note: This routine is not supported in Fortran. Concepts: error messages^printing Concepts: printing^error messages .seealso: PetscFPrintf(), PetscSynchronizedPrintf(), PetscHelpPrintf(), PetscPrintf(), PetscErrorHandlerPush() M*/ EXTERN PETSC_DLLEXPORT PetscErrorCode (*PetscErrorPrintf)(const char[],...); /*MC PetscHelpPrintf - Prints help messages. Synopsis: PetscErrorCode (*PetscHelpPrintf)(const char format[],...); Not Collective Input Parameters: . format - the usual printf() format string Level: developer Fortran Note: This routine is not supported in Fortran. Concepts: help messages^printing Concepts: printing^help messages .seealso: PetscFPrintf(), PetscSynchronizedPrintf(), PetscErrorPrintf() M*/ EXTERN PETSC_DLLEXPORT PetscErrorCode (*PetscHelpPrintf)(MPI_Comm,const char[],...); EXTERN PetscErrorCode PetscErrorPrintfDefault(const char [],...); EXTERN PetscErrorCode PetscErrorPrintfNone(const char [],...); EXTERN PetscErrorCode PetscHelpPrintfDefault(MPI_Comm,const char [],...); #if defined(PETSC_HAVE_POPEN) EXTERN PetscErrorCode PETSC_DLLEXPORT PetscPOpen(MPI_Comm,const char[],const char[],const char[],FILE **); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscPClose(MPI_Comm,FILE*); #endif EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSynchronizedPrintf(MPI_Comm,const char[],...) PETSC_PRINTF_FORMAT_CHECK(2,3); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSynchronizedFPrintf(MPI_Comm,FILE*,const char[],...) PETSC_PRINTF_FORMAT_CHECK(3,4); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSynchronizedFlush(MPI_Comm); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSynchronizedFGets(MPI_Comm,FILE*,size_t,char[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscStartMatlab(MPI_Comm,const char[],const char[],FILE**); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscStartJava(MPI_Comm,const char[],const char[],FILE**); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscGetPetscDir(const char*[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscPopUpSelect(MPI_Comm,const char*,const char*,int,const char**,int*); /*S PetscContainer - Simple PETSc object that contains a pointer to any required data Level: advanced .seealso: PetscObject, PetscContainerCreate() S*/ extern PetscClassId PETSC_DLLEXPORT PETSC_CONTAINER_CLASSID; typedef struct _p_PetscContainer* PetscContainer; EXTERN PetscErrorCode PETSC_DLLEXPORT PetscContainerGetPointer(PetscContainer,void **); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscContainerSetPointer(PetscContainer,void *); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscContainerDestroy(PetscContainer); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscContainerCreate(MPI_Comm,PetscContainer *); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscContainerSetUserDestroy(PetscContainer, PetscErrorCode (*)(void*)); /* For use in debuggers */ extern PETSC_DLLEXPORT PetscMPIInt PetscGlobalRank; extern PETSC_DLLEXPORT PetscMPIInt PetscGlobalSize; EXTERN PetscErrorCode PETSC_DLLEXPORT PetscIntView(PetscInt,const PetscInt[],PetscViewer); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscRealView(PetscInt,const PetscReal[],PetscViewer); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscScalarView(PetscInt,const PetscScalar[],PetscViewer); #if defined(PETSC_HAVE_MEMORY_H) #include #endif #if defined(PETSC_HAVE_STDLIB_H) #include #endif #if defined(PETSC_HAVE_STRINGS_H) #include #endif #if defined(PETSC_HAVE_STRING_H) #include #endif #if defined(PETSC_HAVE_XMMINTRIN_H) #include #endif #if defined(PETSC_HAVE_STDINT_H) #include #endif /*@C PetscMemcpy - Copies n bytes, beginning at location b, to the space beginning at location a. The two memory regions CANNOT overlap, use PetscMemmove() in that case. Not Collective Input Parameters: + b - pointer to initial memory space - n - length (in bytes) of space to copy Output Parameter: . a - pointer to copy space Level: intermediate Compile Option: PETSC_PREFER_DCOPY_FOR_MEMCPY will cause the BLAS dcopy() routine to be used for memory copies on double precision values. PETSC_PREFER_COPY_FOR_MEMCPY will cause C code to be used for memory copies on double precision values. PETSC_PREFER_FORTRAN_FORMEMCPY will cause Fortran code to be used for memory copies on double precision values. Note: This routine is analogous to memcpy(). Developer Note: this is inlined for fastest performance Concepts: memory^copying Concepts: copying^memory .seealso: PetscMemmove() @*/ PETSC_STATIC_INLINE PetscErrorCode PETSC_DLLEXPORT PetscMemcpy(void *a,const void *b,size_t n) { #if defined(PETSC_USE_DEBUG) unsigned long al = (unsigned long) a,bl = (unsigned long) b; unsigned long nl = (unsigned long) n; if (n > 0 && !b) SETERRQ(PETSC_COMM_SELF,PETSC_ERR_ARG_NULL,"Trying to copy from a null pointer"); if (n > 0 && !a) SETERRQ(PETSC_COMM_SELF,PETSC_ERR_ARG_NULL,"Trying to copy to a null pointer"); #endif PetscFunctionBegin; if (a != b) { #if defined(PETSC_USE_DEBUG) if ((al > bl && (al - bl) < nl) || (bl - al) < nl) { SETERRQ3(PETSC_COMM_SELF,PETSC_ERR_ARG_INCOMP,"Memory regions overlap: either use PetscMemmov()\n\ or make sure your copy regions and lengths are correct. \n\ Length (bytes) %ld first address %ld second address %ld",nl,al,bl); } #endif #if (defined(PETSC_PREFER_DCOPY_FOR_MEMCPY) || defined(PETSC_PREFER_COPY_FOR_MEMCPY) || defined(PETSC_PREFER_FORTRAN_FORMEMCPY)) if (!(((long) a) % sizeof(PetscScalar)) && !(n % sizeof(PetscScalar))) { size_t len = n/sizeof(PetscScalar); #if defined(PETSC_PREFER_DCOPY_FOR_MEMCPY) PetscBLASInt one = 1,blen = PetscBLASIntCast(len); BLAScopy_(&blen,(PetscScalar *)b,&one,(PetscScalar *)a,&one); #elif defined(PETSC_PREFER_FORTRAN_FORMEMCPY) fortrancopy_(&len,(PetscScalar*)b,(PetscScalar*)a); #else size_t i; PetscScalar *x = (PetscScalar*)b, *y = (PetscScalar*)a; for (i=0; i 0) { #if defined(PETSC_USE_DEBUG) if (!a) SETERRQ(PETSC_COMM_SELF,PETSC_ERR_ARG_NULL,"Trying to zero at a null pointer"); #endif #if defined(PETSC_PREFER_ZERO_FOR_MEMZERO) if (!(((long) a) % sizeof(PetscScalar)) && !(n % sizeof(PetscScalar))) { size_t i,len = n/sizeof(PetscScalar); PetscScalar *x = (PetscScalar*)a; for (i=0; i PETSC_MPI_INT_MAX) SETERRQ(PETSC_COMM_SELF,PETSC_ERR_ARG_OUTOFRANGE,"Message too long for MPI") #define PetscBLASIntCheck(a) if ((a) > PETSC_BLAS_INT_MAX) SETERRQ(PETSC_COMM_SELF,PETSC_ERR_ARG_OUTOFRANGE,"Array too long for BLAS/LAPACK") #define PetscMPIIntCast(a) (a);PetscMPIIntCheck(a) #define PetscBLASIntCast(a) (a);PetscBLASIntCheck(a) #if (PETSC_SIZEOF_SIZE_T == 4) #define PetscHDF5IntCheck(a) if ((a) > PETSC_HDF5_INT_MAX) SETERRQ(PETSC_COMM_SELF,PETSC_ERR_ARG_OUTOFRANGE,"Array too long for HDF5") #define PetscHDF5IntCast(a) (a);PetscHDF5IntCheck(a) #else #define PetscHDF5IntCheck(a) #define PetscHDF5IntCast(a) a #endif #else #define PetscMPIIntCheck(a) #define PetscBLASIntCheck(a) #define PetscHDF5IntCheck(a) #define PetscMPIIntCast(a) a #define PetscBLASIntCast(a) a #define PetscHDF5IntCast(a) a #endif /* The IBM include files define hz, here we hide it so that it may be used as a regular user variable. */ #if defined(hz) #undef hz #endif /* For arrays that contain filenames or paths */ #if defined(PETSC_HAVE_LIMITS_H) #include #endif #if defined(PETSC_HAVE_SYS_PARAM_H) #include #endif #if defined(PETSC_HAVE_SYS_TYPES_H) #include #endif #if defined(MAXPATHLEN) # define PETSC_MAX_PATH_LEN MAXPATHLEN #elif defined(MAX_PATH) # define PETSC_MAX_PATH_LEN MAX_PATH #elif defined(_MAX_PATH) # define PETSC_MAX_PATH_LEN _MAX_PATH #else # define PETSC_MAX_PATH_LEN 4096 #endif /* Special support for C++ */ #include "petscsys.hh" /*MC UsingFortran - Fortran can be used with PETSc in four distinct approaches $ 1) classic Fortran 77 style $#include "finclude/petscXXX.h" to work with material from the XXX component of PETSc $ XXX variablename $ You cannot use this approach if you wish to use the Fortran 90 specific PETSc routines $ which end in F90; such as VecGetArrayF90() $ $ 2) classic Fortran 90 style $#include "finclude/petscXXX.h" $#include "finclude/petscXXX.h90" to work with material from the XXX component of PETSc $ XXX variablename $ $ 3) Using Fortran modules $#include "finclude/petscXXXdef.h" $ use petscXXXX $ XXX variablename $ $ 4) Use Fortran modules and Fortran data types for PETSc types $#include "finclude/petscXXXdef.h" $ use petscXXXX $ type(XXX) variablename $ To use this approach you must ./configure PETSc with the additional $ option --with-fortran-datatypes You cannot use the type(XXX) declaration approach without using Fortran modules Finally if you absolutely do not want to use any #include you can use either $ 3a) skip the #include BUT you cannot use any PETSc data type names like Vec, Mat, PetscInt, PetscErrorCode etc $ and you must declare the variables as integer, for example $ integer variablename $ $ 4a) skip the #include, you use the object types like type(Vec) type(Mat) but cannot use the data type $ names like PetscErrorCode, PetscInt etc. again for those you must use integer We recommend either 2 or 3. Approaches 2 and 3 provide type checking for most PETSc function calls; 4 has type checking for only a few PETSc functions. Fortran type checking with interfaces is strick, this means you cannot pass a scalar value when an array value is expected (even though it is legal Fortran). For example when setting a single value in a matrix with MatSetValues() you cannot have something like $ PetscInt row,col $ PetscScalar val $ ... $ call MatSetValues(mat,1,row,1,col,val,INSERT_VALUES,ierr) You must instead have $ PetscInt row(1),col(1) $ PetscScalar val(1) $ ... $ call MatSetValues(mat,1,row,1,col,val,INSERT_VALUES,ierr) See the example src/vec/vec/examples/tutorials/ex20f90.F90 for an example that can use all four approaches Developer Notes: The finclude/petscXXXdef.h contain all the #defines (would be typedefs in C code) these automatically include their predecessors; for example finclude/petscvecdef.h includes finclude/petscisdef.h The finclude/petscXXXX.h contain all the parameter statements for that package. These automatically include their finclude/petscXXXdef.h file but DO NOT automatically include their predecessors; for example finclude/petscvec.h does NOT automatically include finclude/petscis.h The finclude/ftn-custom/petscXXXdef.h90 are not intended to be used directly in code, they define the Fortran data type type(XXX) (for example type(Vec)) when PETSc is ./configure with the --with-fortran-datatypes option. The finclude/ftn-custom/petscXXX.h90 (not included directly by code) contain interface definitions for the PETSc Fortran stubs that have different bindings then their C version (for example VecGetArrayF90). The finclude/ftn-auto/petscXXX.h90 (not included directly by code) contain interface definitions generated automatically by "make allfortranstubs". The finclude/petscXXX.h90 includes the custom finclude/ftn-custom/petscXXX.h90 and if ./configure was run with --with-fortran-interfaces it also includes the finclude/ftn-auto/petscXXX.h90 These DO NOT automatically include their predecessors Level: beginner M*/ EXTERN PetscErrorCode PETSC_DLLEXPORT PetscGetArchType(char[],size_t); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscGetHostName(char[],size_t); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscGetUserName(char[],size_t); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscGetProgramName(char[],size_t); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSetProgramName(const char[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscGetDate(char[],size_t); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSortInt(PetscInt,PetscInt[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSortIntWithPermutation(PetscInt,const PetscInt[],PetscInt[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSortStrWithPermutation(PetscInt,const char*[],PetscInt[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSortIntWithArray(PetscInt,PetscInt[],PetscInt[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSortMPIIntWithArray(PetscMPIInt,PetscMPIInt[],PetscMPIInt[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSortIntWithScalarArray(PetscInt,PetscInt[],PetscScalar[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSortReal(PetscInt,PetscReal[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSortRealWithPermutation(PetscInt,const PetscReal[],PetscInt[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSortSplit(PetscInt,PetscInt,PetscScalar[],PetscInt[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSortSplitReal(PetscInt,PetscInt,PetscReal[],PetscInt[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSetDisplay(void); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscGetDisplay(char[],size_t); /*E PetscRandomType - String with the name of a PETSc randomizer with an optional dynamic library name, for example http://www.mcs.anl.gov/petsc/lib.a:myrandcreate() Level: beginner Notes: to use the SPRNG you must have ./configure PETSc with the option --download-sprng .seealso: PetscRandomSetType(), PetscRandom E*/ #define PetscRandomType char* #define PETSCRAND "rand" #define PETSCRAND48 "rand48" #define PETSCSPRNG "sprng" /* Logging support */ extern PETSC_DLLEXPORT PetscClassId PETSC_RANDOM_CLASSID; EXTERN PetscErrorCode PETSC_DLLEXPORT PetscRandomInitializePackage(const char[]); /*S PetscRandom - Abstract PETSc object that manages generating random numbers Level: intermediate Concepts: random numbers .seealso: PetscRandomCreate(), PetscRandomGetValue(), PetscRandomType S*/ typedef struct _p_PetscRandom* PetscRandom; /* Dynamic creation and loading functions */ extern PetscFList PetscRandomList; extern PetscTruth PetscRandomRegisterAllCalled; EXTERN PetscErrorCode PETSC_DLLEXPORT PetscRandomRegisterAll(const char []); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscRandomRegister(const char[],const char[],const char[],PetscErrorCode (*)(PetscRandom)); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscRandomRegisterDestroy(void); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscRandomSetType(PetscRandom, const PetscRandomType); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscRandomSetFromOptions(PetscRandom); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscRandomGetType(PetscRandom, const PetscRandomType*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscRandomViewFromOptions(PetscRandom,char*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscRandomView(PetscRandom,PetscViewer); /*MC PetscRandomRegisterDynamic - Adds a new PetscRandom component implementation Synopsis: PetscErrorCode PetscRandomRegisterDynamic(const char *name, const char *path, const char *func_name, PetscErrorCode (*create_func)(PetscRandom)) Not Collective Input Parameters: + name - The name of a new user-defined creation routine . path - The path (either absolute or relative) of the library containing this routine . func_name - The name of routine to create method context - create_func - The creation routine itself Notes: PetscRandomRegisterDynamic() may be called multiple times to add several user-defined randome number generators If dynamic libraries are used, then the fourth input argument (routine_create) is ignored. Sample usage: .vb PetscRandomRegisterDynamic("my_rand","/home/username/my_lib/lib/libO/solaris/libmy.a", "MyPetscRandomtorCreate", MyPetscRandomtorCreate); .ve Then, your random type can be chosen with the procedural interface via .vb PetscRandomCreate(MPI_Comm, PetscRandom *); PetscRandomSetType(PetscRandom,"my_random_name"); .ve or at runtime via the option .vb -random_type my_random_name .ve Notes: $PETSC_ARCH occuring in pathname will be replaced with appropriate values. For an example of the code needed to interface your own random number generator see src/sys/random/impls/rand/rand.c Level: advanced .keywords: PetscRandom, register .seealso: PetscRandomRegisterAll(), PetscRandomRegisterDestroy(), PetscRandomRegister() M*/ #if defined(PETSC_USE_DYNAMIC_LIBRARIES) #define PetscRandomRegisterDynamic(a,b,c,d) PetscRandomRegister(a,b,c,0) #else #define PetscRandomRegisterDynamic(a,b,c,d) PetscRandomRegister(a,b,c,d) #endif EXTERN PetscErrorCode PETSC_DLLEXPORT PetscRandomCreate(MPI_Comm,PetscRandom*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscRandomGetValue(PetscRandom,PetscScalar*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscRandomGetValueReal(PetscRandom,PetscReal*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscRandomGetInterval(PetscRandom,PetscScalar*,PetscScalar*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscRandomSetInterval(PetscRandom,PetscScalar,PetscScalar); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscRandomSetSeed(PetscRandom,unsigned long); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscRandomGetSeed(PetscRandom,unsigned long *); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscRandomSeed(PetscRandom); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscRandomDestroy(PetscRandom); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscGetFullPath(const char[],char[],size_t); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscGetRelativePath(const char[],char[],size_t); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscGetWorkingDirectory(char[],size_t); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscGetRealPath(const char[],char[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscGetHomeDirectory(char[],size_t); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscTestFile(const char[],char,PetscTruth*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscTestDirectory(const char[],char,PetscTruth*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscBinaryRead(int,void*,PetscInt,PetscDataType); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscBinarySynchronizedRead(MPI_Comm,int,void*,PetscInt,PetscDataType); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscBinarySynchronizedWrite(MPI_Comm,int,void*,PetscInt,PetscDataType,PetscTruth); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscBinaryWrite(int,void*,PetscInt,PetscDataType,PetscTruth); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscBinaryOpen(const char[],PetscFileMode,int *); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscBinaryClose(int); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSharedTmp(MPI_Comm,PetscTruth *); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSharedWorkingDirectory(MPI_Comm,PetscTruth *); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscGetTmp(MPI_Comm,char[],size_t); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscFileRetrieve(MPI_Comm,const char[],char[],size_t,PetscTruth*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscLs(MPI_Comm,const char[],char[],size_t,PetscTruth*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscOpenSocket(char*,int,int*); /* In binary files variables are stored using the following lengths, regardless of how they are stored in memory on any one particular machine. Use these rather then sizeof() in computing sizes for PetscBinarySeek(). */ #define PETSC_BINARY_INT_SIZE (32/8) #define PETSC_BINARY_FLOAT_SIZE (32/8) #define PETSC_BINARY_CHAR_SIZE (8/8) #define PETSC_BINARY_SHORT_SIZE (16/8) #define PETSC_BINARY_DOUBLE_SIZE (64/8) #define PETSC_BINARY_SCALAR_SIZE sizeof(PetscScalar) /*E PetscBinarySeekType - argument to PetscBinarySeek() Level: advanced .seealso: PetscBinarySeek(), PetscBinarySynchronizedSeek() E*/ typedef enum {PETSC_BINARY_SEEK_SET = 0,PETSC_BINARY_SEEK_CUR = 1,PETSC_BINARY_SEEK_END = 2} PetscBinarySeekType; EXTERN PetscErrorCode PETSC_DLLEXPORT PetscBinarySeek(int,off_t,PetscBinarySeekType,off_t*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscBinarySynchronizedSeek(MPI_Comm,int,off_t,PetscBinarySeekType,off_t*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSetDebugTerminal(const char[]); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSetDebugger(const char[],PetscTruth); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSetDefaultDebugger(void); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSetDebuggerFromString(char*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscAttachDebugger(void); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscStopForDebugger(void); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscGatherNumberOfMessages(MPI_Comm,const PetscMPIInt[],const PetscMPIInt[],PetscMPIInt*); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscGatherMessageLengths(MPI_Comm,PetscMPIInt,PetscMPIInt,const PetscMPIInt[],PetscMPIInt**,PetscMPIInt**); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscGatherMessageLengths2(MPI_Comm,PetscMPIInt,PetscMPIInt,const PetscMPIInt[],const PetscMPIInt[],PetscMPIInt**,PetscMPIInt**,PetscMPIInt**); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscPostIrecvInt(MPI_Comm,PetscMPIInt,PetscMPIInt,const PetscMPIInt[],const PetscMPIInt[],PetscInt***,MPI_Request**); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscPostIrecvScalar(MPI_Comm,PetscMPIInt,PetscMPIInt,const PetscMPIInt[],const PetscMPIInt[],PetscScalar***,MPI_Request**); EXTERN PetscErrorCode PETSC_DLLEXPORT PetscSSEIsEnabled(MPI_Comm,PetscTruth *,PetscTruth *); /*E InsertMode - Whether entries are inserted or added into vectors or matrices Level: beginner .seealso: VecSetValues(), MatSetValues(), VecSetValue(), VecSetValuesBlocked(), VecSetValuesLocal(), VecSetValuesBlockedLocal(), MatSetValuesBlocked(), MatSetValuesBlockedLocal(), MatSetValuesLocal(), VecScatterBegin(), VecScatterEnd() E*/ typedef enum {NOT_SET_VALUES, INSERT_VALUES, ADD_VALUES, MAX_VALUES} InsertMode; /*MC INSERT_VALUES - Put a value into a vector or matrix, overwrites any previous value Level: beginner .seealso: InsertMode, VecSetValues(), MatSetValues(), VecSetValue(), VecSetValuesBlocked(), VecSetValuesLocal(), VecSetValuesBlockedLocal(), MatSetValuesBlocked(), ADD_VALUES, MatSetValuesBlockedLocal(), MatSetValuesLocal(), VecScatterBegin(), VecScatterEnd(), MAX_VALUES M*/ /*MC ADD_VALUES - Adds a value into a vector or matrix, if there previously was no value, just puts the value into that location Level: beginner .seealso: InsertMode, VecSetValues(), MatSetValues(), VecSetValue(), VecSetValuesBlocked(), VecSetValuesLocal(), VecSetValuesBlockedLocal(), MatSetValuesBlocked(), INSERT_VALUES, MatSetValuesBlockedLocal(), MatSetValuesLocal(), VecScatterBegin(), VecScatterEnd(), MAX_VALUES M*/ /*MC MAX_VALUES - Puts the maximum of the scattered/gathered value and the current value into each location Level: beginner .seealso: InsertMode, VecScatterBegin(), VecScatterEnd(), ADD_VALUES, INSERT_VALUES M*/ /*S PetscSubcomm - Context of MPI subcommunicators, used by PCREDUNDANT Level: advanced Concepts: communicator, create S*/ typedef struct _n_PetscSubcomm* PetscSubcomm; struct _n_PetscSubcomm { MPI_Comm parent; /* parent communicator */ MPI_Comm dupparent; /* duplicate parent communicator, under which the processors of this subcomm have contiguous rank */ MPI_Comm comm; /* this communicator */ PetscInt n; /* num of subcommunicators under the parent communicator */ PetscInt color; /* color of processors belong to this communicator */ }; EXTERN PetscErrorCode PETSCMAT_DLLEXPORT PetscSubcommCreate(MPI_Comm,PetscInt,PetscSubcomm*); EXTERN PetscErrorCode PETSCMAT_DLLEXPORT PetscSubcommDestroy(PetscSubcomm); PETSC_EXTERN_CXX_END #endif