#include <petsc/private/petscfeimpl.h> /*I "petscfe.h" I*/
#include <petscdmplex.h>

PetscClassId PETSCDUALSPACE_CLASSID = 0;

PetscLogEvent PETSCDUALSPACE_SetUp;

PetscFunctionList PetscDualSpaceList              = NULL;
PetscBool         PetscDualSpaceRegisterAllCalled = PETSC_FALSE;

/*
  PetscDualSpaceLatticePointLexicographic_Internal - Returns all tuples of size 'len' with nonnegative integers that sum up to at most 'max'.
                                                     Ordering is lexicographic with lowest index as least significant in ordering.
                                                     e.g. for len == 2 and max == 2, this will return, in order, {0,0}, {1,0}, {2,0}, {0,1}, {1,1}, {0,2}.

  Input Parameters:
+ len - The length of the tuple
. max - The maximum sum
- tup - A tuple of length len+1: tup[len] > 0 indicates a stopping condition

  Output Parameter:
. tup - A tuple of `len` integers whose sum is at most `max`

  Level: developer

.seealso: `PetscDualSpaceType`, `PetscDualSpaceTensorPointLexicographic_Internal()`
*/
PetscErrorCode PetscDualSpaceLatticePointLexicographic_Internal(PetscInt len, PetscInt max, PetscInt tup[])
{
  PetscFunctionBegin;
  while (len--) {
    max -= tup[len];
    if (!max) {
      tup[len] = 0;
      break;
    }
  }
  tup[++len]++;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*
  PetscDualSpaceTensorPointLexicographic_Internal - Returns all tuples of size 'len' with nonnegative integers that are all less than or equal to 'max'.
                                                    Ordering is lexicographic with lowest index as least significant in ordering.
                                                    e.g. for len == 2 and max == 2, this will return, in order, {0,0}, {1,0}, {2,0}, {0,1}, {1,1}, {2,1}, {0,2}, {1,2}, {2,2}.

  Input Parameters:
+ len - The length of the tuple
. max - The maximum value
- tup - A tuple of length len+1: tup[len] > 0 indicates a stopping condition

  Output Parameter:
. tup - A tuple of `len` integers whose entries are at most `max`

  Level: developer

.seealso: `PetscDualSpaceType`, `PetscDualSpaceLatticePointLexicographic_Internal()`
*/
PetscErrorCode PetscDualSpaceTensorPointLexicographic_Internal(PetscInt len, PetscInt max, PetscInt tup[])
{
  PetscInt i;

  PetscFunctionBegin;
  for (i = 0; i < len; i++) {
    if (tup[i] < max) {
      break;
    } else {
      tup[i] = 0;
    }
  }
  tup[i]++;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceRegister - Adds a new `PetscDualSpaceType`

  Not Collective, No Fortran Support

  Input Parameters:
+ sname    - The name of a new user-defined creation routine
- function - The creation routine

  Example Usage:
.vb
    PetscDualSpaceRegister("my_space", MyPetscDualSpaceCreate);
.ve

  Then, your PetscDualSpace type can be chosen with the procedural interface via
.vb
    PetscDualSpaceCreate(MPI_Comm, PetscDualSpace *);
    PetscDualSpaceSetType(PetscDualSpace, "my_dual_space");
.ve
  or at runtime via the option
.vb
    -petscdualspace_type my_dual_space
.ve

  Level: advanced

  Note:
  `PetscDualSpaceRegister()` may be called multiple times to add several user-defined `PetscDualSpace`

.seealso: `PetscDualSpace`, `PetscDualSpaceType`, `PetscDualSpaceRegisterAll()`, `PetscDualSpaceRegisterDestroy()`
@*/
PetscErrorCode PetscDualSpaceRegister(const char sname[], PetscErrorCode (*function)(PetscDualSpace))
{
  PetscFunctionBegin;
  PetscCall(PetscFunctionListAdd(&PetscDualSpaceList, sname, function));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceSetType - Builds a particular `PetscDualSpace` based on its `PetscDualSpaceType`

  Collective

  Input Parameters:
+ sp   - The `PetscDualSpace` object
- name - The kind of space

  Options Database Key:
. -petscdualspace_type <type> - Sets the PetscDualSpace type; use -help for a list of available types

  Level: intermediate

.seealso: `PetscDualSpace`, `PetscDualSpaceType`, `PetscDualSpaceGetType()`, `PetscDualSpaceCreate()`
@*/
PetscErrorCode PetscDualSpaceSetType(PetscDualSpace sp, PetscDualSpaceType name)
{
  PetscErrorCode (*r)(PetscDualSpace);
  PetscBool match;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(sp, PETSCDUALSPACE_CLASSID, 1);
  PetscCall(PetscObjectTypeCompare((PetscObject)sp, name, &match));
  if (match) PetscFunctionReturn(PETSC_SUCCESS);

  if (!PetscDualSpaceRegisterAllCalled) PetscCall(PetscDualSpaceRegisterAll());
  PetscCall(PetscFunctionListFind(PetscDualSpaceList, name, &r));
  PetscCheck(r, PetscObjectComm((PetscObject)sp), PETSC_ERR_ARG_UNKNOWN_TYPE, "Unknown PetscDualSpace type: %s", name);

  PetscTryTypeMethod(sp, destroy);
  sp->ops->destroy = NULL;

  PetscCall((*r)(sp));
  PetscCall(PetscObjectChangeTypeName((PetscObject)sp, name));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceGetType - Gets the `PetscDualSpaceType` name (as a string) from the object.

  Not Collective

  Input Parameter:
. sp - The `PetscDualSpace`

  Output Parameter:
. name - The `PetscDualSpaceType` name

  Level: intermediate

.seealso: `PetscDualSpace`, `PetscDualSpaceType`, `PetscDualSpaceSetType()`, `PetscDualSpaceCreate()`
@*/
PetscErrorCode PetscDualSpaceGetType(PetscDualSpace sp, PetscDualSpaceType *name)
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(sp, PETSCDUALSPACE_CLASSID, 1);
  PetscAssertPointer(name, 2);
  if (!PetscDualSpaceRegisterAllCalled) PetscCall(PetscDualSpaceRegisterAll());
  *name = ((PetscObject)sp)->type_name;
  PetscFunctionReturn(PETSC_SUCCESS);
}

static PetscErrorCode PetscDualSpaceView_ASCII(PetscDualSpace sp, PetscViewer v)
{
  PetscViewerFormat format;
  PetscInt          pdim, f;

  PetscFunctionBegin;
  PetscCall(PetscDualSpaceGetDimension(sp, &pdim));
  PetscCall(PetscObjectPrintClassNamePrefixType((PetscObject)sp, v));
  PetscCall(PetscViewerASCIIPushTab(v));
  if (sp->k != 0 && sp->k != PETSC_FORM_DEGREE_UNDEFINED) {
    PetscCall(PetscViewerASCIIPrintf(v, "Dual space for %" PetscInt_FMT "-forms %swith %" PetscInt_FMT " components, size %" PetscInt_FMT "\n", PetscAbsInt(sp->k), sp->k < 0 ? "(stored in dual form) " : "", sp->Nc, pdim));
  } else {
    PetscCall(PetscViewerASCIIPrintf(v, "Dual space with %" PetscInt_FMT " components, size %" PetscInt_FMT "\n", sp->Nc, pdim));
  }
  PetscTryTypeMethod(sp, view, v);
  PetscCall(PetscViewerGetFormat(v, &format));
  if (format == PETSC_VIEWER_ASCII_INFO_DETAIL) {
    PetscCall(PetscViewerASCIIPushTab(v));
    for (f = 0; f < pdim; ++f) {
      PetscCall(PetscViewerASCIIPrintf(v, "Dual basis vector %" PetscInt_FMT "\n", f));
      PetscCall(PetscViewerASCIIPushTab(v));
      PetscCall(PetscQuadratureView(sp->functional[f], v));
      PetscCall(PetscViewerASCIIPopTab(v));
    }
    PetscCall(PetscViewerASCIIPopTab(v));
  }
  PetscCall(PetscViewerASCIIPopTab(v));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceViewFromOptions - View a `PetscDualSpace` based on values in the options database

  Collective

  Input Parameters:
+ A    - the `PetscDualSpace` object
. obj  - Optional object, provides the options prefix
- name - command line option name

  Level: intermediate

  Note:
  See `PetscObjectViewFromOptions()` for possible command line values

.seealso: `PetscDualSpace`, `PetscDualSpaceView()`, `PetscObjectViewFromOptions()`, `PetscDualSpaceCreate()`
@*/
PetscErrorCode PetscDualSpaceViewFromOptions(PetscDualSpace A, PeOp PetscObject obj, const char name[])
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(A, PETSCDUALSPACE_CLASSID, 1);
  PetscCall(PetscObjectViewFromOptions((PetscObject)A, obj, name));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceView - Views a `PetscDualSpace`

  Collective

  Input Parameters:
+ sp - the `PetscDualSpace` object to view
- v  - the viewer

  Level: beginner

.seealso: `PetscViewer`, `PetscDualSpaceDestroy()`, `PetscDualSpace`
@*/
PetscErrorCode PetscDualSpaceView(PetscDualSpace sp, PetscViewer v)
{
  PetscBool isascii;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(sp, PETSCDUALSPACE_CLASSID, 1);
  if (v) PetscValidHeaderSpecific(v, PETSC_VIEWER_CLASSID, 2);
  if (!v) PetscCall(PetscViewerASCIIGetStdout(PetscObjectComm((PetscObject)sp), &v));
  PetscCall(PetscObjectTypeCompare((PetscObject)v, PETSCVIEWERASCII, &isascii));
  if (isascii) PetscCall(PetscDualSpaceView_ASCII(sp, v));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceSetFromOptions - sets parameters in a `PetscDualSpace` from the options database

  Collective

  Input Parameter:
. sp - the `PetscDualSpace` object to set options for

  Options Database Keys:
+ -petscdualspace_order <order>                 - the approximation order of the space
. -petscdualspace_form_degree <deg>             - the form degree, say 0 for point evaluations, or 2 for area integrals
. -petscdualspace_components <c>                - the number of components, say d for a vector field
. -petscdualspace_refcell <celltype>            - Reference cell type name
. -petscdualspace_lagrange_continuity           - Flag for continuous element
. -petscdualspace_lagrange_tensor               - Flag for tensor dual space
. -petscdualspace_lagrange_trimmed              - Flag for trimmed dual space
. -petscdualspace_lagrange_node_type <nodetype> - Lagrange node location type
. -petscdualspace_lagrange_node_endpoints       - Flag for nodes that include endpoints
. -petscdualspace_lagrange_node_exponent        - Gauss-Jacobi weight function exponent
. -petscdualspace_lagrange_use_moments          - Use moments (where appropriate) for functionals
- -petscdualspace_lagrange_moment_order <order> - Quadrature order for moment functionals

  Level: intermediate

.seealso: `PetscDualSpaceView()`, `PetscDualSpace`, `PetscObjectSetFromOptions()`
@*/
PetscErrorCode PetscDualSpaceSetFromOptions(PetscDualSpace sp)
{
  DMPolytopeType refCell = DM_POLYTOPE_TRIANGLE;
  const char    *defaultType;
  char           name[256];
  PetscBool      flg;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(sp, PETSCDUALSPACE_CLASSID, 1);
  if (!((PetscObject)sp)->type_name) {
    defaultType = PETSCDUALSPACELAGRANGE;
  } else {
    defaultType = ((PetscObject)sp)->type_name;
  }
  if (!PetscSpaceRegisterAllCalled) PetscCall(PetscSpaceRegisterAll());

  PetscObjectOptionsBegin((PetscObject)sp);
  PetscCall(PetscOptionsFList("-petscdualspace_type", "Dual space", "PetscDualSpaceSetType", PetscDualSpaceList, defaultType, name, 256, &flg));
  if (flg) {
    PetscCall(PetscDualSpaceSetType(sp, name));
  } else if (!((PetscObject)sp)->type_name) {
    PetscCall(PetscDualSpaceSetType(sp, defaultType));
  }
  PetscCall(PetscOptionsBoundedInt("-petscdualspace_order", "The approximation order", "PetscDualSpaceSetOrder", sp->order, &sp->order, NULL, 0));
  PetscCall(PetscOptionsInt("-petscdualspace_form_degree", "The form degree of the dofs", "PetscDualSpaceSetFormDegree", sp->k, &sp->k, NULL));
  PetscCall(PetscOptionsBoundedInt("-petscdualspace_components", "The number of components", "PetscDualSpaceSetNumComponents", sp->Nc, &sp->Nc, NULL, 1));
  PetscTryTypeMethod(sp, setfromoptions, PetscOptionsObject);
  PetscCall(PetscOptionsEnum("-petscdualspace_refcell", "Reference cell shape", "PetscDualSpaceSetReferenceCell", DMPolytopeTypes, (PetscEnum)refCell, (PetscEnum *)&refCell, &flg));
  if (flg) {
    DM K;

    PetscCall(DMPlexCreateReferenceCell(PETSC_COMM_SELF, refCell, &K));
    PetscCall(PetscDualSpaceSetDM(sp, K));
    PetscCall(DMDestroy(&K));
  }

  /* process any options handlers added with PetscObjectAddOptionsHandler() */
  PetscCall(PetscObjectProcessOptionsHandlers((PetscObject)sp, PetscOptionsObject));
  PetscOptionsEnd();
  sp->setfromoptionscalled = PETSC_TRUE;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceSetUp - Construct a basis for a `PetscDualSpace`

  Collective

  Input Parameter:
. sp - the `PetscDualSpace` object to setup

  Level: intermediate

.seealso: `PetscDualSpaceView()`, `PetscDualSpaceDestroy()`, `PetscDualSpace`
@*/
PetscErrorCode PetscDualSpaceSetUp(PetscDualSpace sp)
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(sp, PETSCDUALSPACE_CLASSID, 1);
  if (sp->setupcalled) PetscFunctionReturn(PETSC_SUCCESS);
  PetscCall(PetscLogEventBegin(PETSCDUALSPACE_SetUp, sp, 0, 0, 0));
  sp->setupcalled = PETSC_TRUE;
  PetscTryTypeMethod(sp, setup);
  PetscCall(PetscLogEventEnd(PETSCDUALSPACE_SetUp, sp, 0, 0, 0));
  if (sp->setfromoptionscalled) PetscCall(PetscDualSpaceViewFromOptions(sp, NULL, "-petscdualspace_view"));
  PetscFunctionReturn(PETSC_SUCCESS);
}

static PetscErrorCode PetscDualSpaceClearDMData_Internal(PetscDualSpace sp, DM dm)
{
  PetscInt pStart = -1, pEnd = -1, depth = -1;

  PetscFunctionBegin;
  if (!dm) PetscFunctionReturn(PETSC_SUCCESS);
  PetscCall(DMPlexGetChart(dm, &pStart, &pEnd));
  PetscCall(DMPlexGetDepth(dm, &depth));

  if (sp->pointSpaces) {
    PetscInt i;

    for (i = 0; i < pEnd - pStart; i++) PetscCall(PetscDualSpaceDestroy(&sp->pointSpaces[i]));
  }
  PetscCall(PetscFree(sp->pointSpaces));

  if (sp->heightSpaces) {
    PetscInt i;

    for (i = 0; i <= depth; i++) PetscCall(PetscDualSpaceDestroy(&sp->heightSpaces[i]));
  }
  PetscCall(PetscFree(sp->heightSpaces));

  PetscCall(PetscSectionDestroy(&sp->pointSection));
  PetscCall(PetscSectionDestroy(&sp->intPointSection));
  PetscCall(PetscQuadratureDestroy(&sp->intNodes));
  PetscCall(VecDestroy(&sp->intDofValues));
  PetscCall(VecDestroy(&sp->intNodeValues));
  PetscCall(MatDestroy(&sp->intMat));
  PetscCall(PetscQuadratureDestroy(&sp->allNodes));
  PetscCall(VecDestroy(&sp->allDofValues));
  PetscCall(VecDestroy(&sp->allNodeValues));
  PetscCall(MatDestroy(&sp->allMat));
  PetscCall(PetscFree(sp->numDof));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceDestroy - Destroys a `PetscDualSpace` object

  Collective

  Input Parameter:
. sp - the `PetscDualSpace` object to destroy

  Level: beginner

.seealso: `PetscDualSpace`, `PetscDualSpaceView()`, `PetscDualSpace()`, `PetscDualSpaceCreate()`
@*/
PetscErrorCode PetscDualSpaceDestroy(PetscDualSpace *sp)
{
  PetscInt dim, f;
  DM       dm;

  PetscFunctionBegin;
  if (!*sp) PetscFunctionReturn(PETSC_SUCCESS);
  PetscValidHeaderSpecific(*sp, PETSCDUALSPACE_CLASSID, 1);

  if (--((PetscObject)*sp)->refct > 0) {
    *sp = NULL;
    PetscFunctionReturn(PETSC_SUCCESS);
  }
  ((PetscObject)*sp)->refct = 0;

  PetscCall(PetscDualSpaceGetDimension(*sp, &dim));
  dm = (*sp)->dm;

  PetscTryTypeMethod(*sp, destroy);
  PetscCall(PetscDualSpaceClearDMData_Internal(*sp, dm));

  for (f = 0; f < dim; ++f) PetscCall(PetscQuadratureDestroy(&(*sp)->functional[f]));
  PetscCall(PetscFree((*sp)->functional));
  PetscCall(DMDestroy(&(*sp)->dm));
  PetscCall(PetscHeaderDestroy(sp));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceCreate - Creates an empty `PetscDualSpace` object. The type can then be set with `PetscDualSpaceSetType()`.

  Collective

  Input Parameter:
. comm - The communicator for the `PetscDualSpace` object

  Output Parameter:
. sp - The `PetscDualSpace` object

  Level: beginner

.seealso: `PetscDualSpace`, `PetscDualSpaceSetType()`, `PETSCDUALSPACELAGRANGE`
@*/
PetscErrorCode PetscDualSpaceCreate(MPI_Comm comm, PetscDualSpace *sp)
{
  PetscDualSpace s;

  PetscFunctionBegin;
  PetscAssertPointer(sp, 2);
  PetscCall(PetscCitationsRegister(FECitation, &FEcite));
  PetscCall(PetscFEInitializePackage());

  PetscCall(PetscHeaderCreate(s, PETSCDUALSPACE_CLASSID, "PetscDualSpace", "Dual Space", "PetscDualSpace", comm, PetscDualSpaceDestroy, PetscDualSpaceView));
  s->order       = 0;
  s->Nc          = 1;
  s->k           = 0;
  s->spdim       = -1;
  s->spintdim    = -1;
  s->uniform     = PETSC_TRUE;
  s->setupcalled = PETSC_FALSE;
  *sp            = s;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceDuplicate - Creates a duplicate `PetscDualSpace` object that is not setup.

  Collective

  Input Parameter:
. sp - The original `PetscDualSpace`

  Output Parameter:
. spNew - The duplicate `PetscDualSpace`

  Level: beginner

.seealso: `PetscDualSpace`, `PetscDualSpaceCreate()`, `PetscDualSpaceSetType()`
@*/
PetscErrorCode PetscDualSpaceDuplicate(PetscDualSpace sp, PetscDualSpace *spNew)
{
  DM                 dm;
  PetscDualSpaceType type;
  const char        *name;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(sp, PETSCDUALSPACE_CLASSID, 1);
  PetscAssertPointer(spNew, 2);
  PetscCall(PetscDualSpaceCreate(PetscObjectComm((PetscObject)sp), spNew));
  name = ((PetscObject)sp)->name;
  if (name) PetscCall(PetscObjectSetName((PetscObject)*spNew, name));
  PetscCall(PetscDualSpaceGetType(sp, &type));
  PetscCall(PetscDualSpaceSetType(*spNew, type));
  PetscCall(PetscDualSpaceGetDM(sp, &dm));
  PetscCall(PetscDualSpaceSetDM(*spNew, dm));

  (*spNew)->order   = sp->order;
  (*spNew)->k       = sp->k;
  (*spNew)->Nc      = sp->Nc;
  (*spNew)->uniform = sp->uniform;
  PetscTryTypeMethod(sp, duplicate, *spNew);
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceGetDM - Get the `DM` representing the reference cell of a `PetscDualSpace`

  Not Collective

  Input Parameter:
. sp - The `PetscDualSpace`

  Output Parameter:
. dm - The reference cell, that is a `DM` that consists of a single cell

  Level: intermediate

.seealso: `PetscDualSpace`, `PetscDualSpaceSetDM()`, `PetscDualSpaceCreate()`
@*/
PetscErrorCode PetscDualSpaceGetDM(PetscDualSpace sp, DM *dm)
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(sp, PETSCDUALSPACE_CLASSID, 1);
  PetscAssertPointer(dm, 2);
  *dm = sp->dm;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceSetDM - Get the `DM` representing the reference cell

  Not Collective

  Input Parameters:
+ sp - The `PetscDual`Space
- dm - The reference cell

  Level: intermediate

.seealso: `PetscDualSpace`, `DM`, `PetscDualSpaceGetDM()`, `PetscDualSpaceCreate()`
@*/
PetscErrorCode PetscDualSpaceSetDM(PetscDualSpace sp, DM dm)
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(sp, PETSCDUALSPACE_CLASSID, 1);
  PetscValidHeaderSpecific(dm, DM_CLASSID, 2);
  PetscCheck(!sp->setupcalled, PetscObjectComm((PetscObject)sp), PETSC_ERR_ARG_WRONGSTATE, "Cannot change DM after dualspace is set up");
  PetscCall(PetscObjectReference((PetscObject)dm));
  if (sp->dm && sp->dm != dm) PetscCall(PetscDualSpaceClearDMData_Internal(sp, sp->dm));
  PetscCall(DMDestroy(&sp->dm));
  sp->dm = dm;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceGetOrder - Get the order of the dual space

  Not Collective

  Input Parameter:
. sp - The `PetscDualSpace`

  Output Parameter:
. order - The order

  Level: intermediate

.seealso: `PetscDualSpace`, `PetscDualSpaceSetOrder()`, `PetscDualSpaceCreate()`
@*/
PetscErrorCode PetscDualSpaceGetOrder(PetscDualSpace sp, PetscInt *order)
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(sp, PETSCDUALSPACE_CLASSID, 1);
  PetscAssertPointer(order, 2);
  *order = sp->order;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceSetOrder - Set the order of the dual space

  Not Collective

  Input Parameters:
+ sp    - The `PetscDualSpace`
- order - The order

  Level: intermediate

.seealso: `PetscDualSpace`, `PetscDualSpaceGetOrder()`, `PetscDualSpaceCreate()`
@*/
PetscErrorCode PetscDualSpaceSetOrder(PetscDualSpace sp, PetscInt order)
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(sp, PETSCDUALSPACE_CLASSID, 1);
  PetscCheck(!sp->setupcalled, PetscObjectComm((PetscObject)sp), PETSC_ERR_ARG_WRONGSTATE, "Cannot change order after dualspace is set up");
  sp->order = order;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceGetNumComponents - Return the number of components for this space

  Input Parameter:
. sp - The `PetscDualSpace`

  Output Parameter:
. Nc - The number of components

  Level: intermediate

  Note:
  A vector space, for example, will have d components, where d is the spatial dimension

.seealso: `PetscDualSpaceSetNumComponents()`, `PetscDualSpaceGetDimension()`, `PetscDualSpaceCreate()`, `PetscDualSpace`
@*/
PetscErrorCode PetscDualSpaceGetNumComponents(PetscDualSpace sp, PetscInt *Nc)
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(sp, PETSCDUALSPACE_CLASSID, 1);
  PetscAssertPointer(Nc, 2);
  *Nc = sp->Nc;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceSetNumComponents - Set the number of components for this space

  Input Parameters:
+ sp - The `PetscDualSpace`
- Nc - The number of components

  Level: intermediate

.seealso: `PetscDualSpaceGetNumComponents()`, `PetscDualSpaceCreate()`, `PetscDualSpace`
@*/
PetscErrorCode PetscDualSpaceSetNumComponents(PetscDualSpace sp, PetscInt Nc)
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(sp, PETSCDUALSPACE_CLASSID, 1);
  PetscCheck(!sp->setupcalled, PetscObjectComm((PetscObject)sp), PETSC_ERR_ARG_WRONGSTATE, "Cannot change number of components after dualspace is set up");
  sp->Nc = Nc;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceGetFunctional - Get the i-th basis functional in the dual space

  Not Collective

  Input Parameters:
+ sp - The `PetscDualSpace`
- i  - The basis number

  Output Parameter:
. functional - The basis functional

  Level: intermediate

.seealso: `PetscDualSpace`, `PetscQuadrature`, `PetscDualSpaceGetDimension()`, `PetscDualSpaceCreate()`
@*/
PetscErrorCode PetscDualSpaceGetFunctional(PetscDualSpace sp, PetscInt i, PetscQuadrature *functional)
{
  PetscInt dim;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(sp, PETSCDUALSPACE_CLASSID, 1);
  PetscAssertPointer(functional, 3);
  PetscCall(PetscDualSpaceGetDimension(sp, &dim));
  PetscCheck(!(i < 0) && !(i >= dim), PETSC_COMM_SELF, PETSC_ERR_ARG_OUTOFRANGE, "Functional index %" PetscInt_FMT " must be in [0, %" PetscInt_FMT ")", i, dim);
  *functional = sp->functional[i];
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceGetDimension - Get the dimension of the dual space, i.e. the number of basis functionals

  Not Collective

  Input Parameter:
. sp - The `PetscDualSpace`

  Output Parameter:
. dim - The dimension

  Level: intermediate

.seealso: `PetscDualSpace`, `PetscDualSpaceGetFunctional()`, `PetscDualSpaceCreate()`
@*/
PetscErrorCode PetscDualSpaceGetDimension(PetscDualSpace sp, PetscInt *dim)
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(sp, PETSCDUALSPACE_CLASSID, 1);
  PetscAssertPointer(dim, 2);
  if (sp->spdim < 0) {
    PetscSection section;

    PetscCall(PetscDualSpaceGetSection(sp, &section));
    if (section) PetscCall(PetscSectionGetStorageSize(section, &sp->spdim));
    else sp->spdim = 0;
  }
  *dim = sp->spdim;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceGetInteriorDimension - Get the interior dimension of the dual space, i.e. the number of basis functionals assigned to the interior of the reference domain

  Not Collective

  Input Parameter:
. sp - The `PetscDualSpace`

  Output Parameter:
. intdim - The dimension

  Level: intermediate

.seealso: `PetscDualSpace`, `PetscDualSpaceGetFunctional()`, `PetscDualSpaceCreate()`
@*/
PetscErrorCode PetscDualSpaceGetInteriorDimension(PetscDualSpace sp, PetscInt *intdim)
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(sp, PETSCDUALSPACE_CLASSID, 1);
  PetscAssertPointer(intdim, 2);
  if (sp->spintdim < 0) {
    PetscSection section;

    PetscCall(PetscDualSpaceGetSection(sp, &section));
    if (section) PetscCall(PetscSectionGetConstrainedStorageSize(section, &sp->spintdim));
    else sp->spintdim = 0;
  }
  *intdim = sp->spintdim;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceGetUniform - Whether this dual space is uniform

  Not Collective

  Input Parameter:
. sp - A dual space

  Output Parameter:
. uniform - `PETSC_TRUE` if (a) the dual space is the same for each point in a stratum of the reference `DMPLEX`, and
             (b) every symmetry of each point in the reference `DMPLEX` is also a symmetry of the point's dual space.

  Level: advanced

  Note:
  All of the usual spaces on simplex or tensor-product elements will be uniform, only reference cells
  with non-uniform strata (like trianguar-prisms) or anisotropic hp dual spaces will not be uniform.

.seealso: `PetscDualSpace`, `PetscDualSpaceGetPointSubspace()`, `PetscDualSpaceGetSymmetries()`
@*/
PetscErrorCode PetscDualSpaceGetUniform(PetscDualSpace sp, PetscBool *uniform)
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(sp, PETSCDUALSPACE_CLASSID, 1);
  PetscAssertPointer(uniform, 2);
  *uniform = sp->uniform;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@CC
  PetscDualSpaceGetNumDof - Get the number of degrees of freedom for each spatial (topological) dimension

  Not Collective

  Input Parameter:
. sp - The `PetscDualSpace`

  Output Parameter:
. numDof - An array of length dim+1 which holds the number of dofs for each dimension

  Level: intermediate

  Note:
  Do not free `numDof`

.seealso: `PetscDualSpace`, `PetscDualSpaceGetFunctional()`, `PetscDualSpaceCreate()`
@*/
PetscErrorCode PetscDualSpaceGetNumDof(PetscDualSpace sp, const PetscInt *numDof[])
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(sp, PETSCDUALSPACE_CLASSID, 1);
  PetscAssertPointer(numDof, 2);
  PetscCheck(sp->uniform, PETSC_COMM_SELF, PETSC_ERR_ARG_WRONG, "A non-uniform space does not have a fixed number of dofs for each height");
  if (!sp->numDof) {
    DM           dm;
    PetscInt     depth, d;
    PetscSection section;

    PetscCall(PetscDualSpaceGetDM(sp, &dm));
    PetscCall(DMPlexGetDepth(dm, &depth));
    PetscCall(PetscCalloc1(depth + 1, &sp->numDof));
    PetscCall(PetscDualSpaceGetSection(sp, &section));
    for (d = 0; d <= depth; d++) {
      PetscInt dStart, dEnd;

      PetscCall(DMPlexGetDepthStratum(dm, d, &dStart, &dEnd));
      if (dEnd <= dStart) continue;
      PetscCall(PetscSectionGetDof(section, dStart, &sp->numDof[d]));
    }
  }
  *numDof = sp->numDof;
  PetscCheck(*numDof, PetscObjectComm((PetscObject)sp), PETSC_ERR_LIB, "Empty numDof[] returned from dual space implementation");
  PetscFunctionReturn(PETSC_SUCCESS);
}

/* create the section of the right size and set a permutation for topological ordering */
PetscErrorCode PetscDualSpaceSectionCreate_Internal(PetscDualSpace sp, PetscSection *topSection)
{
  DM           dm;
  PetscInt     pStart, pEnd, cStart, cEnd, c, depth, count, i;
  PetscInt    *seen, *perm;
  PetscSection section;

  PetscFunctionBegin;
  dm = sp->dm;
  PetscCall(PetscSectionCreate(PETSC_COMM_SELF, &section));
  PetscCall(DMPlexGetChart(dm, &pStart, &pEnd));
  PetscCall(PetscSectionSetChart(section, pStart, pEnd));
  PetscCall(PetscCalloc1(pEnd - pStart, &seen));
  PetscCall(PetscMalloc1(pEnd - pStart, &perm));
  PetscCall(DMPlexGetDepth(dm, &depth));
  PetscCall(DMPlexGetHeightStratum(dm, 0, &cStart, &cEnd));
  for (c = cStart, count = 0; c < cEnd; c++) {
    PetscInt  closureSize = -1, e;
    PetscInt *closure     = NULL;

    perm[count++]    = c;
    seen[c - pStart] = 1;
    PetscCall(DMPlexGetTransitiveClosure(dm, c, PETSC_TRUE, &closureSize, &closure));
    for (e = 0; e < closureSize; e++) {
      PetscInt point = closure[2 * e];

      if (seen[point - pStart]) continue;
      perm[count++]        = point;
      seen[point - pStart] = 1;
    }
    PetscCall(DMPlexRestoreTransitiveClosure(dm, c, PETSC_TRUE, &closureSize, &closure));
  }
  PetscCheck(count == pEnd - pStart, PETSC_COMM_SELF, PETSC_ERR_PLIB, "Bad topological ordering");
  for (i = 0; i < pEnd - pStart; i++)
    if (perm[i] != i) break;
  if (i < pEnd - pStart) {
    IS permIS;

    PetscCall(ISCreateGeneral(PETSC_COMM_SELF, pEnd - pStart, perm, PETSC_OWN_POINTER, &permIS));
    PetscCall(ISSetPermutation(permIS));
    PetscCall(PetscSectionSetPermutation(section, permIS));
    PetscCall(ISDestroy(&permIS));
  } else {
    PetscCall(PetscFree(perm));
  }
  PetscCall(PetscFree(seen));
  *topSection = section;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/* mark boundary points and set up */
PetscErrorCode PetscDualSpaceSectionSetUp_Internal(PetscDualSpace sp, PetscSection section)
{
  DM       dm;
  DMLabel  boundary;
  PetscInt pStart, pEnd, p;

  PetscFunctionBegin;
  dm = sp->dm;
  PetscCall(DMLabelCreate(PETSC_COMM_SELF, "boundary", &boundary));
  PetscCall(PetscDualSpaceGetDM(sp, &dm));
  PetscCall(DMPlexMarkBoundaryFaces(dm, 1, boundary));
  PetscCall(DMPlexLabelComplete(dm, boundary));
  PetscCall(DMPlexGetChart(dm, &pStart, &pEnd));
  for (p = pStart; p < pEnd; p++) {
    PetscInt bval;

    PetscCall(DMLabelGetValue(boundary, p, &bval));
    if (bval == 1) {
      PetscInt dof;

      PetscCall(PetscSectionGetDof(section, p, &dof));
      PetscCall(PetscSectionSetConstraintDof(section, p, dof));
    }
  }
  PetscCall(DMLabelDestroy(&boundary));
  PetscCall(PetscSectionSetUp(section));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceGetSection - Create a `PetscSection` over the reference cell with the layout from this space

  Collective

  Input Parameter:
. sp - The `PetscDualSpace`

  Output Parameter:
. section - The section

  Level: advanced

.seealso: `PetscDualSpace`, `PetscSection`, `PetscDualSpaceCreate()`, `DMPLEX`
@*/
PetscErrorCode PetscDualSpaceGetSection(PetscDualSpace sp, PetscSection *section)
{
  PetscInt pStart, pEnd, p;

  PetscFunctionBegin;
  if (!sp->dm) {
    *section = NULL;
    PetscFunctionReturn(PETSC_SUCCESS);
  }
  if (!sp->pointSection) {
    /* mark the boundary */
    PetscCall(PetscDualSpaceSectionCreate_Internal(sp, &sp->pointSection));
    PetscCall(DMPlexGetChart(sp->dm, &pStart, &pEnd));
    for (p = pStart; p < pEnd; p++) {
      PetscDualSpace psp;

      PetscCall(PetscDualSpaceGetPointSubspace(sp, p, &psp));
      if (psp) {
        PetscInt dof;

        PetscCall(PetscDualSpaceGetInteriorDimension(psp, &dof));
        PetscCall(PetscSectionSetDof(sp->pointSection, p, dof));
      }
    }
    PetscCall(PetscDualSpaceSectionSetUp_Internal(sp, sp->pointSection));
  }
  *section = sp->pointSection;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceGetInteriorSection - Create a `PetscSection` over the reference cell with the layout from this space
  for interior degrees of freedom

  Collective

  Input Parameter:
. sp - The `PetscDualSpace`

  Output Parameter:
. section - The interior section

  Level: advanced

  Note:
  Most reference domains have one cell, in which case the only cell will have
  all of the interior degrees of freedom in the interior section.  But
  for `PETSCDUALSPACEREFINED` there may be other mesh points in the interior,
  and this section describes their layout.

.seealso: `PetscDualSpace`, `PetscSection`, `PetscDualSpaceCreate()`, `DMPLEX`
@*/
PetscErrorCode PetscDualSpaceGetInteriorSection(PetscDualSpace sp, PetscSection *section)
{
  PetscInt pStart, pEnd, p;

  PetscFunctionBegin;
  if (!sp->dm) {
    *section = NULL;
    PetscFunctionReturn(PETSC_SUCCESS);
  }
  if (!sp->intPointSection) {
    PetscSection full_section;

    PetscCall(PetscDualSpaceGetSection(sp, &full_section));
    PetscCall(PetscDualSpaceSectionCreate_Internal(sp, &sp->intPointSection));
    PetscCall(PetscSectionGetChart(full_section, &pStart, &pEnd));
    for (p = pStart; p < pEnd; p++) {
      PetscInt dof, cdof;

      PetscCall(PetscSectionGetDof(full_section, p, &dof));
      PetscCall(PetscSectionGetConstraintDof(full_section, p, &cdof));
      PetscCall(PetscSectionSetDof(sp->intPointSection, p, dof - cdof));
    }
    PetscCall(PetscDualSpaceSectionSetUp_Internal(sp, sp->intPointSection));
  }
  *section = sp->intPointSection;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/* this assumes that all of the point dual spaces store their interior dofs first, which is true when the point DMs
 * have one cell */
PetscErrorCode PetscDualSpacePushForwardSubspaces_Internal(PetscDualSpace sp, PetscInt sStart, PetscInt sEnd)
{
  PetscReal   *sv0, *v0, *J;
  PetscSection section;
  PetscInt     dim, s, k;
  DM           dm;

  PetscFunctionBegin;
  PetscCall(PetscDualSpaceGetDM(sp, &dm));
  PetscCall(DMGetDimension(dm, &dim));
  PetscCall(PetscDualSpaceGetSection(sp, &section));
  PetscCall(PetscMalloc3(dim, &v0, dim, &sv0, dim * dim, &J));
  PetscCall(PetscDualSpaceGetFormDegree(sp, &k));
  for (s = sStart; s < sEnd; s++) {
    PetscReal      detJ, hdetJ;
    PetscDualSpace ssp;
    PetscInt       dof, off, f, sdim;
    PetscInt       i, j;
    DM             sdm;

    PetscCall(PetscDualSpaceGetPointSubspace(sp, s, &ssp));
    if (!ssp) continue;
    PetscCall(PetscSectionGetDof(section, s, &dof));
    PetscCall(PetscSectionGetOffset(section, s, &off));
    /* get the first vertex of the reference cell */
    PetscCall(PetscDualSpaceGetDM(ssp, &sdm));
    PetscCall(DMGetDimension(sdm, &sdim));
    PetscCall(DMPlexComputeCellGeometryAffineFEM(sdm, 0, sv0, NULL, NULL, &hdetJ));
    PetscCall(DMPlexComputeCellGeometryAffineFEM(dm, s, v0, J, NULL, &detJ));
    /* compactify Jacobian */
    for (i = 0; i < dim; i++)
      for (j = 0; j < sdim; j++) J[i * sdim + j] = J[i * dim + j];
    for (f = 0; f < dof; f++) {
      PetscQuadrature fn;

      PetscCall(PetscDualSpaceGetFunctional(ssp, f, &fn));
      PetscCall(PetscQuadraturePushForward(fn, dim, sv0, v0, J, k, &sp->functional[off + f]));
    }
  }
  PetscCall(PetscFree3(v0, sv0, J));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceApply - Apply a functional from the dual space basis to an input function

  Input Parameters:
+ sp      - The `PetscDualSpace` object
. f       - The basis functional index
. time    - The time
. cgeom   - A context with geometric information for this cell, we use v0 (the initial vertex) and J (the Jacobian) (or evaluated at the coordinates of the functional)
. numComp - The number of components for the function
. func    - The input function
- ctx     - A context for the function

  Output Parameter:
. value - numComp output values

  Calling sequence:
.vb
  PetscErrorCode func(PetscInt dim, PetscReal time, const PetscReal x[], PetscInt numComponents, PetscScalar values[], PetscCtx ctx)
.ve

  Level: beginner

.seealso: `PetscDualSpace`, `PetscDualSpaceCreate()`
@*/
PetscErrorCode PetscDualSpaceApply(PetscDualSpace sp, PetscInt f, PetscReal time, PetscFEGeom *cgeom, PetscInt numComp, PetscErrorCode (*func)(PetscInt, PetscReal, const PetscReal[], PetscInt, PetscScalar *, void *), PetscCtx ctx, PetscScalar *value)
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(sp, PETSCDUALSPACE_CLASSID, 1);
  PetscAssertPointer(cgeom, 4);
  PetscAssertPointer(value, 8);
  PetscUseTypeMethod(sp, apply, f, time, cgeom, numComp, func, ctx, value);
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceApplyAll - Apply all functionals from the dual space basis to the result of an evaluation at the points returned by `PetscDualSpaceGetAllData()`

  Input Parameters:
+ sp        - The `PetscDualSpace` object
- pointEval - Evaluation at the points returned by `PetscDualSpaceGetAllData()`

  Output Parameter:
. spValue - The values of all dual space functionals

  Level: advanced

.seealso: `PetscDualSpace`, `PetscDualSpaceCreate()`
@*/
PetscErrorCode PetscDualSpaceApplyAll(PetscDualSpace sp, const PetscScalar *pointEval, PetscScalar *spValue)
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(sp, PETSCDUALSPACE_CLASSID, 1);
  PetscUseTypeMethod(sp, applyall, pointEval, spValue);
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceApplyInterior - Apply interior functionals from the dual space basis to the result of an evaluation at the points returned by `PetscDualSpaceGetInteriorData()`

  Input Parameters:
+ sp        - The `PetscDualSpace` object
- pointEval - Evaluation at the points returned by `PetscDualSpaceGetInteriorData()`

  Output Parameter:
. spValue - The values of interior dual space functionals

  Level: advanced

.seealso: `PetscDualSpace`, `PetscDualSpaceCreate()`
@*/
PetscErrorCode PetscDualSpaceApplyInterior(PetscDualSpace sp, const PetscScalar *pointEval, PetscScalar *spValue)
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(sp, PETSCDUALSPACE_CLASSID, 1);
  PetscUseTypeMethod(sp, applyint, pointEval, spValue);
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceApplyDefault - Apply a functional from the dual space basis to an input function by assuming a point evaluation functional.

  Input Parameters:
+ sp    - The `PetscDualSpace` object
. f     - The basis functional index
. time  - The time
. cgeom - A context with geometric information for this cell, we use v0 (the initial vertex) and J (the Jacobian)
. Nc    - The number of components for the function
. func  - The input function
- ctx   - A context for the function

  Output Parameter:
. value - The output value

  Calling sequence:
.vb
   PetscErrorCode func(PetscInt dim, PetscReal time, const PetscReal x[],PetscInt numComponents, PetscScalar values[], PetscCtx ctx)
.ve

  Level: advanced

  Note:
  The idea is to evaluate the functional as an integral $ n(f) = \int dx n(x) . f(x) $ where both n and f have Nc components.

.seealso: `PetscDualSpace`, `PetscDualSpaceCreate()`
@*/
PetscErrorCode PetscDualSpaceApplyDefault(PetscDualSpace sp, PetscInt f, PetscReal time, PetscFEGeom *cgeom, PetscInt Nc, PetscErrorCode (*func)(PetscInt, PetscReal, const PetscReal[], PetscInt, PetscScalar *, void *), PetscCtx ctx, PetscScalar *value)
{
  DM               dm;
  PetscQuadrature  n;
  const PetscReal *points, *weights;
  PetscReal        x[3];
  PetscScalar     *val;
  PetscInt         dim, dE, qNc, c, Nq, q;
  PetscBool        isAffine;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(sp, PETSCDUALSPACE_CLASSID, 1);
  PetscAssertPointer(value, 8);
  PetscCall(PetscDualSpaceGetDM(sp, &dm));
  PetscCall(PetscDualSpaceGetFunctional(sp, f, &n));
  PetscCall(PetscQuadratureGetData(n, &dim, &qNc, &Nq, &points, &weights));
  PetscCheck(dim == cgeom->dim, PetscObjectComm((PetscObject)sp), PETSC_ERR_ARG_SIZ, "The quadrature spatial dimension %" PetscInt_FMT " != cell geometry dimension %" PetscInt_FMT, dim, cgeom->dim);
  PetscCheck(qNc == Nc, PetscObjectComm((PetscObject)sp), PETSC_ERR_ARG_SIZ, "The quadrature components %" PetscInt_FMT " != function components %" PetscInt_FMT, qNc, Nc);
  PetscCall(DMGetWorkArray(dm, Nc, MPIU_SCALAR, &val));
  *value   = 0.0;
  isAffine = cgeom->isAffine;
  dE       = cgeom->dimEmbed;
  for (q = 0; q < Nq; ++q) {
    if (isAffine) {
      CoordinatesRefToReal(dE, cgeom->dim, cgeom->xi, cgeom->v, cgeom->J, &points[q * dim], x);
      PetscCall((*func)(dE, time, x, Nc, val, ctx));
    } else {
      PetscCall((*func)(dE, time, &cgeom->v[dE * q], Nc, val, ctx));
    }
    for (c = 0; c < Nc; ++c) *value += val[c] * weights[q * Nc + c];
  }
  PetscCall(DMRestoreWorkArray(dm, Nc, MPIU_SCALAR, &val));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceApplyAllDefault - Apply all functionals from the dual space basis to the result of an evaluation at the points returned by `PetscDualSpaceGetAllData()`

  Input Parameters:
+ sp        - The `PetscDualSpace` object
- pointEval - Evaluation at the points returned by `PetscDualSpaceGetAllData()`

  Output Parameter:
. spValue - The values of all dual space functionals

  Level: advanced

.seealso: `PetscDualSpace`, `PetscDualSpaceCreate()`
@*/
PetscErrorCode PetscDualSpaceApplyAllDefault(PetscDualSpace sp, const PetscScalar *pointEval, PetscScalar *spValue)
{
  Vec pointValues, dofValues;
  Mat allMat;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(sp, PETSCDUALSPACE_CLASSID, 1);
  PetscAssertPointer(pointEval, 2);
  PetscAssertPointer(spValue, 3);
  PetscCall(PetscDualSpaceGetAllData(sp, NULL, &allMat));
  if (!sp->allNodeValues) PetscCall(MatCreateVecs(allMat, &sp->allNodeValues, NULL));
  pointValues = sp->allNodeValues;
  if (!sp->allDofValues) PetscCall(MatCreateVecs(allMat, NULL, &sp->allDofValues));
  dofValues = sp->allDofValues;
  PetscCall(VecPlaceArray(pointValues, pointEval));
  PetscCall(VecPlaceArray(dofValues, spValue));
  PetscCall(MatMult(allMat, pointValues, dofValues));
  PetscCall(VecResetArray(dofValues));
  PetscCall(VecResetArray(pointValues));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceApplyInteriorDefault - Apply interior functionals from the dual space basis to the result of an evaluation at the points returned by `PetscDualSpaceGetInteriorData()`

  Input Parameters:
+ sp        - The `PetscDualSpace` object
- pointEval - Evaluation at the points returned by `PetscDualSpaceGetInteriorData()`

  Output Parameter:
. spValue - The values of interior dual space functionals

  Level: advanced

.seealso: `PetscDualSpace`, `PetscDualSpaceCreate()`
@*/
PetscErrorCode PetscDualSpaceApplyInteriorDefault(PetscDualSpace sp, const PetscScalar *pointEval, PetscScalar *spValue)
{
  Vec pointValues, dofValues;
  Mat intMat;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(sp, PETSCDUALSPACE_CLASSID, 1);
  PetscAssertPointer(pointEval, 2);
  PetscAssertPointer(spValue, 3);
  PetscCall(PetscDualSpaceGetInteriorData(sp, NULL, &intMat));
  if (!sp->intNodeValues) PetscCall(MatCreateVecs(intMat, &sp->intNodeValues, NULL));
  pointValues = sp->intNodeValues;
  if (!sp->intDofValues) PetscCall(MatCreateVecs(intMat, NULL, &sp->intDofValues));
  dofValues = sp->intDofValues;
  PetscCall(VecPlaceArray(pointValues, pointEval));
  PetscCall(VecPlaceArray(dofValues, spValue));
  PetscCall(MatMult(intMat, pointValues, dofValues));
  PetscCall(VecResetArray(dofValues));
  PetscCall(VecResetArray(pointValues));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceGetAllData - Get all quadrature nodes from this space, and the matrix that sends quadrature node values to degree-of-freedom values

  Input Parameter:
. sp - The dualspace

  Output Parameters:
+ allNodes - A `PetscQuadrature` object containing all evaluation nodes, pass `NULL` if not needed
- allMat   - A `Mat` for the node-to-dof transformation, pass `NULL` if not needed

  Level: advanced

.seealso: `PetscQuadrature`, `PetscDualSpace`, `PetscDualSpaceCreate()`, `Mat`
@*/
PetscErrorCode PetscDualSpaceGetAllData(PetscDualSpace sp, PeOp PetscQuadrature *allNodes, PeOp Mat *allMat)
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(sp, PETSCDUALSPACE_CLASSID, 1);
  if (allNodes) PetscAssertPointer(allNodes, 2);
  if (allMat) PetscAssertPointer(allMat, 3);
  if ((!sp->allNodes || !sp->allMat) && sp->ops->createalldata) {
    PetscQuadrature qpoints;
    Mat             amat;

    PetscUseTypeMethod(sp, createalldata, &qpoints, &amat);
    PetscCall(PetscQuadratureDestroy(&sp->allNodes));
    PetscCall(MatDestroy(&sp->allMat));
    sp->allNodes = qpoints;
    sp->allMat   = amat;
  }
  if (allNodes) *allNodes = sp->allNodes;
  if (allMat) *allMat = sp->allMat;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceCreateAllDataDefault - Create all evaluation nodes and the node-to-dof matrix by examining functionals

  Input Parameter:
. sp - The dualspace

  Output Parameters:
+ allNodes - A `PetscQuadrature` object containing all evaluation nodes
- allMat   - A `Mat` for the node-to-dof transformation

  Level: advanced

.seealso: `PetscDualSpace`, `PetscDualSpaceCreate()`, `Mat`, `PetscQuadrature`
@*/
PetscErrorCode PetscDualSpaceCreateAllDataDefault(PetscDualSpace sp, PetscQuadrature *allNodes, Mat *allMat)
{
  PetscInt        spdim;
  PetscInt        numPoints, offset;
  PetscReal      *points;
  PetscInt        f, dim;
  PetscInt        Nc, nrows, ncols;
  PetscInt        maxNumPoints;
  PetscQuadrature q;
  Mat             A;

  PetscFunctionBegin;
  PetscCall(PetscDualSpaceGetNumComponents(sp, &Nc));
  PetscCall(PetscDualSpaceGetDimension(sp, &spdim));
  if (!spdim) {
    PetscCall(PetscQuadratureCreate(PETSC_COMM_SELF, allNodes));
    PetscCall(PetscQuadratureSetData(*allNodes, 0, 0, 0, NULL, NULL));
  }
  nrows = spdim;
  PetscCall(PetscDualSpaceGetFunctional(sp, 0, &q));
  PetscCall(PetscQuadratureGetData(q, &dim, NULL, &numPoints, NULL, NULL));
  maxNumPoints = numPoints;
  for (f = 1; f < spdim; f++) {
    PetscInt Np;

    PetscCall(PetscDualSpaceGetFunctional(sp, f, &q));
    PetscCall(PetscQuadratureGetData(q, NULL, NULL, &Np, NULL, NULL));
    numPoints += Np;
    maxNumPoints = PetscMax(maxNumPoints, Np);
  }
  ncols = numPoints * Nc;
  PetscCall(PetscMalloc1(dim * numPoints, &points));
  PetscCall(MatCreateSeqAIJ(PETSC_COMM_SELF, nrows, ncols, maxNumPoints * Nc, NULL, &A));
  for (f = 0, offset = 0; f < spdim; f++) {
    const PetscReal *p, *w;
    PetscInt         Np, i;
    PetscInt         fnc;

    PetscCall(PetscDualSpaceGetFunctional(sp, f, &q));
    PetscCall(PetscQuadratureGetData(q, NULL, &fnc, &Np, &p, &w));
    PetscCheck(fnc == Nc, PETSC_COMM_SELF, PETSC_ERR_PLIB, "functional component mismatch");
    for (i = 0; i < Np * dim; i++) points[offset * dim + i] = p[i];
    for (i = 0; i < Np * Nc; i++) PetscCall(MatSetValue(A, f, offset * Nc, w[i], INSERT_VALUES));
    offset += Np;
  }
  PetscCall(MatAssemblyBegin(A, MAT_FINAL_ASSEMBLY));
  PetscCall(MatAssemblyEnd(A, MAT_FINAL_ASSEMBLY));
  PetscCall(PetscQuadratureCreate(PETSC_COMM_SELF, allNodes));
  PetscCall(PetscQuadratureSetData(*allNodes, dim, 0, numPoints, points, NULL));
  *allMat = A;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceGetInteriorData - Get all quadrature points necessary to compute the interior degrees of freedom from
  this space, as well as the matrix that computes the degrees of freedom from the quadrature
  values.

  Input Parameter:
. sp - The dualspace

  Output Parameters:
+ intNodes - A `PetscQuadrature` object containing all evaluation points needed to evaluate interior degrees of freedom,
             pass `NULL` if not needed
- intMat   - A matrix that computes dual space values from point values: size [spdim0 x (npoints * nc)], where spdim0 is
             the size of the constrained layout (`PetscSectionGetConstrainStorageSize()`) of the dual space section,
             npoints is the number of points in intNodes and nc is `PetscDualSpaceGetNumComponents()`.
             Pass `NULL` if not needed

  Level: advanced

  Notes:
  Degrees of freedom are interior degrees of freedom if they belong (by
  `PetscDualSpaceGetSection()`) to interior points in the references, complementary boundary
  degrees of freedom are marked as constrained in the section returned by
  `PetscDualSpaceGetSection()`).

.seealso: `PetscDualSpace`, `PetscQuadrature`, `Mat`, `PetscDualSpaceCreate()`, `PetscDualSpaceGetDimension()`, `PetscDualSpaceGetNumComponents()`, `PetscQuadratureGetData()`
@*/
PetscErrorCode PetscDualSpaceGetInteriorData(PetscDualSpace sp, PeOp PetscQuadrature *intNodes, PeOp Mat *intMat)
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(sp, PETSCDUALSPACE_CLASSID, 1);
  if (intNodes) PetscAssertPointer(intNodes, 2);
  if (intMat) PetscAssertPointer(intMat, 3);
  if ((!sp->intNodes || !sp->intMat) && sp->ops->createintdata) {
    PetscQuadrature qpoints;
    Mat             imat;

    PetscUseTypeMethod(sp, createintdata, &qpoints, &imat);
    PetscCall(PetscQuadratureDestroy(&sp->intNodes));
    PetscCall(MatDestroy(&sp->intMat));
    sp->intNodes = qpoints;
    sp->intMat   = imat;
  }
  if (intNodes) *intNodes = sp->intNodes;
  if (intMat) *intMat = sp->intMat;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceCreateInteriorDataDefault - Create quadrature points by examining interior functionals and create the matrix mapping quadrature point values to interior dual space values

  Input Parameter:
. sp - The dualspace

  Output Parameters:
+ intNodes - A `PetscQuadrature` object containing all evaluation points needed to evaluate interior degrees of freedom
- intMat   - A matrix that computes dual space values from point values: size [spdim0 x (npoints * nc)], where spdim0 is
              the size of the constrained layout (`PetscSectionGetConstrainStorageSize()`) of the dual space section,
              npoints is the number of points in allNodes and nc is `PetscDualSpaceGetNumComponents()`.

  Level: advanced

.seealso: `PetscDualSpace`, `PetscQuadrature`, `Mat`, `PetscDualSpaceCreate()`, `PetscDualSpaceGetInteriorData()`
@*/
PetscErrorCode PetscDualSpaceCreateInteriorDataDefault(PetscDualSpace sp, PetscQuadrature *intNodes, Mat *intMat)
{
  DM              dm;
  PetscInt        spdim0;
  PetscInt        Nc;
  PetscInt        pStart, pEnd, p, f;
  PetscSection    section;
  PetscInt        numPoints, offset, matoffset;
  PetscReal      *points;
  PetscInt        dim;
  PetscInt       *nnz;
  PetscQuadrature q;
  Mat             imat;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(sp, PETSCDUALSPACE_CLASSID, 1);
  PetscCall(PetscDualSpaceGetSection(sp, &section));
  PetscCall(PetscSectionGetConstrainedStorageSize(section, &spdim0));
  if (!spdim0) {
    *intNodes = NULL;
    *intMat   = NULL;
    PetscFunctionReturn(PETSC_SUCCESS);
  }
  PetscCall(PetscDualSpaceGetNumComponents(sp, &Nc));
  PetscCall(PetscSectionGetChart(section, &pStart, &pEnd));
  PetscCall(PetscDualSpaceGetDM(sp, &dm));
  PetscCall(DMGetDimension(dm, &dim));
  PetscCall(PetscMalloc1(spdim0, &nnz));
  for (p = pStart, f = 0, numPoints = 0; p < pEnd; p++) {
    PetscInt dof, cdof, off, d;

    PetscCall(PetscSectionGetDof(section, p, &dof));
    PetscCall(PetscSectionGetConstraintDof(section, p, &cdof));
    if (!(dof - cdof)) continue;
    PetscCall(PetscSectionGetOffset(section, p, &off));
    for (d = 0; d < dof; d++, off++, f++) {
      PetscInt Np;

      PetscCall(PetscDualSpaceGetFunctional(sp, off, &q));
      PetscCall(PetscQuadratureGetData(q, NULL, NULL, &Np, NULL, NULL));
      nnz[f] = Np * Nc;
      numPoints += Np;
    }
  }
  PetscCall(MatCreateSeqAIJ(PETSC_COMM_SELF, spdim0, numPoints * Nc, 0, nnz, &imat));
  PetscCall(PetscFree(nnz));
  PetscCall(PetscMalloc1(dim * numPoints, &points));
  for (p = pStart, f = 0, offset = 0, matoffset = 0; p < pEnd; p++) {
    PetscInt dof, cdof, off, d;

    PetscCall(PetscSectionGetDof(section, p, &dof));
    PetscCall(PetscSectionGetConstraintDof(section, p, &cdof));
    if (!(dof - cdof)) continue;
    PetscCall(PetscSectionGetOffset(section, p, &off));
    for (d = 0; d < dof; d++, off++, f++) {
      const PetscReal *p;
      const PetscReal *w;
      PetscInt         Np, i;

      PetscCall(PetscDualSpaceGetFunctional(sp, off, &q));
      PetscCall(PetscQuadratureGetData(q, NULL, NULL, &Np, &p, &w));
      for (i = 0; i < Np * dim; i++) points[offset + i] = p[i];
      for (i = 0; i < Np * Nc; i++) PetscCall(MatSetValue(imat, f, matoffset + i, w[i], INSERT_VALUES));
      offset += Np * dim;
      matoffset += Np * Nc;
    }
  }
  PetscCall(PetscQuadratureCreate(PETSC_COMM_SELF, intNodes));
  PetscCall(PetscQuadratureSetData(*intNodes, dim, 0, numPoints, points, NULL));
  PetscCall(MatAssemblyBegin(imat, MAT_FINAL_ASSEMBLY));
  PetscCall(MatAssemblyEnd(imat, MAT_FINAL_ASSEMBLY));
  *intMat = imat;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceEqual - Determine if two dual spaces are equivalent

  Input Parameters:
+ A - A `PetscDualSpace` object
- B - Another `PetscDualSpace` object

  Output Parameter:
. equal - `PETSC_TRUE` if the dual spaces are equivalent

  Level: advanced

.seealso: `PetscDualSpace`, `PetscDualSpaceCreate()`
@*/
PetscErrorCode PetscDualSpaceEqual(PetscDualSpace A, PetscDualSpace B, PetscBool *equal)
{
  PetscInt        sizeA, sizeB, dimA, dimB;
  const PetscInt *dofA, *dofB;
  PetscQuadrature quadA, quadB;
  Mat             matA, matB;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(A, PETSCDUALSPACE_CLASSID, 1);
  PetscValidHeaderSpecific(B, PETSCDUALSPACE_CLASSID, 2);
  PetscAssertPointer(equal, 3);
  *equal = PETSC_FALSE;
  PetscCall(PetscDualSpaceGetDimension(A, &sizeA));
  PetscCall(PetscDualSpaceGetDimension(B, &sizeB));
  if (sizeB != sizeA) PetscFunctionReturn(PETSC_SUCCESS);
  PetscCall(DMGetDimension(A->dm, &dimA));
  PetscCall(DMGetDimension(B->dm, &dimB));
  if (dimA != dimB) PetscFunctionReturn(PETSC_SUCCESS);

  PetscCall(PetscDualSpaceGetNumDof(A, &dofA));
  PetscCall(PetscDualSpaceGetNumDof(B, &dofB));
  for (PetscInt d = 0; d < dimA; d++) {
    if (dofA[d] != dofB[d]) PetscFunctionReturn(PETSC_SUCCESS);
  }

  PetscCall(PetscDualSpaceGetInteriorData(A, &quadA, &matA));
  PetscCall(PetscDualSpaceGetInteriorData(B, &quadB, &matB));
  if (!quadA && !quadB) {
    *equal = PETSC_TRUE;
  } else if (quadA && quadB) {
    PetscCall(PetscQuadratureEqual(quadA, quadB, equal));
    if (*equal == PETSC_FALSE) PetscFunctionReturn(PETSC_SUCCESS);
    if (!matA && !matB) PetscFunctionReturn(PETSC_SUCCESS);
    if (matA && matB) PetscCall(MatEqual(matA, matB, equal));
    else *equal = PETSC_FALSE;
  }
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceApplyFVM - Apply a functional from the dual space basis to an input function by assuming a point evaluation functional at the cell centroid.

  Input Parameters:
+ sp    - The `PetscDualSpace` object
. f     - The basis functional index
. time  - The time
. cgeom - A context with geometric information for this cell, we currently just use the centroid
. Nc    - The number of components for the function
. func  - The input function
- ctx   - A context for the function

  Output Parameter:
. value - The output value (scalar)

  Calling sequence:
.vb
  PetscErrorCode func(PetscInt dim, PetscReal time, const PetscReal x[], PetscInt numComponents, PetscScalar values[], PetscCtx ctx)
.ve

  Level: advanced

  Note:
  The idea is to evaluate the functional as an integral $ n(f) = \int dx n(x) . f(x)$ where both n and f have Nc components.

.seealso: `PetscDualSpace`, `PetscDualSpaceCreate()`
@*/
PetscErrorCode PetscDualSpaceApplyFVM(PetscDualSpace sp, PetscInt f, PetscReal time, PetscFVCellGeom *cgeom, PetscInt Nc, PetscErrorCode (*func)(PetscInt, PetscReal, const PetscReal[], PetscInt, PetscScalar *, void *), PetscCtx ctx, PetscScalar *value)
{
  DM               dm;
  PetscQuadrature  n;
  const PetscReal *points, *weights;
  PetscScalar     *val;
  PetscInt         dimEmbed, qNc, c, Nq, q;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(sp, PETSCDUALSPACE_CLASSID, 1);
  PetscAssertPointer(value, 8);
  PetscCall(PetscDualSpaceGetDM(sp, &dm));
  PetscCall(DMGetCoordinateDim(dm, &dimEmbed));
  PetscCall(PetscDualSpaceGetFunctional(sp, f, &n));
  PetscCall(PetscQuadratureGetData(n, NULL, &qNc, &Nq, &points, &weights));
  PetscCheck(qNc == Nc, PetscObjectComm((PetscObject)sp), PETSC_ERR_ARG_SIZ, "The quadrature components %" PetscInt_FMT " != function components %" PetscInt_FMT, qNc, Nc);
  PetscCall(DMGetWorkArray(dm, Nc, MPIU_SCALAR, &val));
  *value = 0.;
  for (q = 0; q < Nq; ++q) {
    PetscCall((*func)(dimEmbed, time, cgeom->centroid, Nc, val, ctx));
    for (c = 0; c < Nc; ++c) *value += val[c] * weights[q * Nc + c];
  }
  PetscCall(DMRestoreWorkArray(dm, Nc, MPIU_SCALAR, &val));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceGetHeightSubspace - Get the subset of the dual space basis that is supported on a mesh point of a
  given height.  This assumes that the reference cell is symmetric over points of this height.

  Not Collective

  Input Parameters:
+ sp     - the `PetscDualSpace` object
- height - the height of the mesh point for which the subspace is desired

  Output Parameter:
. subsp - the subspace.  Note that the functionals in the subspace are with respect to the intrinsic geometry of the
          point, which will be of lesser dimension if height > 0.

  Level: advanced

  Notes:
  If the dual space is not defined on mesh points of the given height (e.g. if the space is discontinuous and
  pointwise values are not defined on the element boundaries), or if the implementation of `PetscDualSpace` does not
  support extracting subspaces, then `NULL` is returned.

  This does not increment the reference count on the returned dual space, and the user should not destroy it.

.seealso: `PetscDualSpace`, `PetscSpaceGetHeightSubspace()`, `PetscDualSpaceGetPointSubspace()`
@*/
PetscErrorCode PetscDualSpaceGetHeightSubspace(PetscDualSpace sp, PetscInt height, PetscDualSpace *subsp)
{
  PetscInt depth = -1, cStart, cEnd;
  DM       dm;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(sp, PETSCDUALSPACE_CLASSID, 1);
  PetscAssertPointer(subsp, 3);
  PetscCheck(sp->uniform, PETSC_COMM_SELF, PETSC_ERR_ARG_WRONG, "A non-uniform dual space does not have a single dual space at each height");
  *subsp = NULL;
  dm     = sp->dm;
  PetscCall(DMPlexGetDepth(dm, &depth));
  PetscCheck(height >= 0 && height <= depth, PETSC_COMM_SELF, PETSC_ERR_ARG_OUTOFRANGE, "Invalid height");
  PetscCall(DMPlexGetHeightStratum(dm, 0, &cStart, &cEnd));
  if (height == 0 && cEnd == cStart + 1) {
    *subsp = sp;
    PetscFunctionReturn(PETSC_SUCCESS);
  }
  if (!sp->heightSpaces) {
    PetscInt h;
    PetscCall(PetscCalloc1(depth + 1, &sp->heightSpaces));

    for (h = 0; h <= depth; h++) {
      if (h == 0 && cEnd == cStart + 1) continue;
      if (sp->ops->createheightsubspace) PetscUseTypeMethod(sp, createheightsubspace, height, &sp->heightSpaces[h]);
      else if (sp->pointSpaces) {
        PetscInt hStart, hEnd;

        PetscCall(DMPlexGetHeightStratum(dm, h, &hStart, &hEnd));
        if (hEnd > hStart) {
          const char *name;

          PetscCall(PetscObjectReference((PetscObject)sp->pointSpaces[hStart]));
          if (sp->pointSpaces[hStart]) {
            PetscCall(PetscObjectGetName((PetscObject)sp, &name));
            PetscCall(PetscObjectSetName((PetscObject)sp->pointSpaces[hStart], name));
          }
          sp->heightSpaces[h] = sp->pointSpaces[hStart];
        }
      }
    }
  }
  *subsp = sp->heightSpaces[height];
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceGetPointSubspace - Get the subset of the dual space basis that is supported on a particular mesh point.

  Not Collective

  Input Parameters:
+ sp    - the `PetscDualSpace` object
- point - the point (in the dual space's DM) for which the subspace is desired

  Output Parameter:
. bdsp - the subspace.

  Level: advanced

  Notes:
  The functionals in the subspace are with respect to the intrinsic geometry of the point,
  which will be of lesser dimension if height > 0.

  If the dual space is not defined on the mesh point (e.g. if the space is discontinuous and pointwise values are not
  defined on the element boundaries), or if the implementation of `PetscDualSpace` does not support extracting
  subspaces, then `NULL` is returned.

  This does not increment the reference count on the returned dual space, and the user should not destroy it.

.seealso: `PetscDualSpace`, `PetscDualSpaceGetHeightSubspace()`
@*/
PetscErrorCode PetscDualSpaceGetPointSubspace(PetscDualSpace sp, PetscInt point, PetscDualSpace *bdsp)
{
  PetscInt pStart = 0, pEnd = 0, cStart, cEnd;
  DM       dm;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(sp, PETSCDUALSPACE_CLASSID, 1);
  PetscAssertPointer(bdsp, 3);
  *bdsp = NULL;
  dm    = sp->dm;
  PetscCall(DMPlexGetChart(dm, &pStart, &pEnd));
  PetscCheck(point >= pStart && point <= pEnd, PETSC_COMM_SELF, PETSC_ERR_ARG_OUTOFRANGE, "Invalid point");
  PetscCall(DMPlexGetHeightStratum(dm, 0, &cStart, &cEnd));
  if (point == cStart && cEnd == cStart + 1) { /* the dual space is only equivalent to the dual space on a cell if the reference mesh has just one cell */
    *bdsp = sp;
    PetscFunctionReturn(PETSC_SUCCESS);
  }
  if (!sp->pointSpaces) {
    PetscInt p;
    PetscCall(PetscCalloc1(pEnd - pStart, &sp->pointSpaces));

    for (p = 0; p < pEnd - pStart; p++) {
      if (p + pStart == cStart && cEnd == cStart + 1) continue;
      if (sp->ops->createpointsubspace) PetscUseTypeMethod(sp, createpointsubspace, p + pStart, &sp->pointSpaces[p]);
      else if (sp->heightSpaces || sp->ops->createheightsubspace) {
        PetscInt dim, depth, height;
        DMLabel  label;

        PetscCall(DMPlexGetDepth(dm, &dim));
        PetscCall(DMPlexGetDepthLabel(dm, &label));
        PetscCall(DMLabelGetValue(label, p + pStart, &depth));
        height = dim - depth;
        PetscCall(PetscDualSpaceGetHeightSubspace(sp, height, &sp->pointSpaces[p]));
        PetscCall(PetscObjectReference((PetscObject)sp->pointSpaces[p]));
      }
    }
  }
  *bdsp = sp->pointSpaces[point - pStart];
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceGetSymmetries - Returns a description of the symmetries of this basis

  Not Collective

  Input Parameter:
. sp - the `PetscDualSpace` object

  Output Parameters:
+ perms - Permutations of the interior degrees of freedom, parameterized by the point orientation
- flips - Sign reversal of the interior degrees of freedom, parameterized by the point orientation

  Level: developer

  Note:
  The permutation and flip arrays are organized in the following way
.vb
  perms[p][ornt][dof # on point] = new local dof #
  flips[p][ornt][dof # on point] = reversal or not
.ve

.seealso: `PetscDualSpace`
@*/
PetscErrorCode PetscDualSpaceGetSymmetries(PetscDualSpace sp, const PetscInt ****perms, const PetscScalar ****flips)
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(sp, PETSCDUALSPACE_CLASSID, 1);
  if (perms) {
    PetscAssertPointer(perms, 2);
    *perms = NULL;
  }
  if (flips) {
    PetscAssertPointer(flips, 3);
    *flips = NULL;
  }
  PetscTryTypeMethod(sp, getsymmetries, perms, flips);
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceGetFormDegree - Get the form degree k for the k-form the describes the pushforwards/pullbacks of this
  dual space's functionals.

  Input Parameter:
. dsp - The `PetscDualSpace`

  Output Parameter:
. k - The *signed* degree k of the k.  If k >= 0, this means that the degrees of freedom are k-forms, and are stored
        in lexicographic order according to the basis of k-forms constructed from the wedge product of 1-forms.  So for example,
        the 1-form basis in 3-D is (dx, dy, dz), and the 2-form basis in 3-D is (dx wedge dy, dx wedge dz, dy wedge dz).
        If k < 0, this means that the degrees transform as k-forms, but are stored as (N-k) forms according to the
        Hodge star map.  So for example if k = -2 and N = 3, this means that the degrees of freedom transform as 2-forms
        but are stored as 1-forms.

  Level: developer

.seealso: `PetscDualSpace`, `PetscDTAltV`, `PetscDualSpacePullback()`, `PetscDualSpacePushforward()`, `PetscDualSpaceTransform()`, `PetscDualSpaceTransformType`
@*/
PetscErrorCode PetscDualSpaceGetFormDegree(PetscDualSpace dsp, PetscInt *k)
{
  PetscFunctionBeginHot;
  PetscValidHeaderSpecific(dsp, PETSCDUALSPACE_CLASSID, 1);
  PetscAssertPointer(k, 2);
  *k = dsp->k;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceSetFormDegree - Set the form degree k for the k-form the describes the pushforwards/pullbacks of this
  dual space's functionals.

  Input Parameters:
+ dsp - The `PetscDualSpace`
- k   - The *signed* degree k of the k.  If k >= 0, this means that the degrees of freedom are k-forms, and are stored
        in lexicographic order according to the basis of k-forms constructed from the wedge product of 1-forms.  So for example,
        the 1-form basis in 3-D is (dx, dy, dz), and the 2-form basis in 3-D is (dx wedge dy, dx wedge dz, dy wedge dz).
        If k < 0, this means that the degrees transform as k-forms, but are stored as (N-k) forms according to the
        Hodge star map.  So for example if k = -2 and N = 3, this means that the degrees of freedom transform as 2-forms
        but are stored as 1-forms.

  Level: developer

.seealso: `PetscDualSpace`, `PetscDTAltV`, `PetscDualSpacePullback()`, `PetscDualSpacePushforward()`, `PetscDualSpaceTransform()`, `PetscDualSpaceTransformType`
@*/
PetscErrorCode PetscDualSpaceSetFormDegree(PetscDualSpace dsp, PetscInt k)
{
  PetscInt dim;

  PetscFunctionBeginHot;
  PetscValidHeaderSpecific(dsp, PETSCDUALSPACE_CLASSID, 1);
  PetscCheck(!dsp->setupcalled, PetscObjectComm((PetscObject)dsp), PETSC_ERR_ARG_WRONGSTATE, "Cannot change number of components after dualspace is set up");
  dim = dsp->dm->dim;
  PetscCheck((k >= -dim && k <= dim) || k == PETSC_FORM_DEGREE_UNDEFINED, PETSC_COMM_SELF, PETSC_ERR_PLIB, "Unsupported %" PetscInt_FMT "-form on %" PetscInt_FMT "-dimensional reference cell", PetscAbsInt(k), dim);
  dsp->k = k;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceGetDeRahm - Get the k-simplex associated with the functionals in this dual space

  Input Parameter:
. dsp - The `PetscDualSpace`

  Output Parameter:
. k - The simplex dimension

  Level: developer

  Note:
  Currently supported values are
.vb
  0: These are H_1 methods that only transform coordinates
  1: These are Hcurl methods that transform functions using the covariant Piola transform (COVARIANT_PIOLA_TRANSFORM)
  2: These are the same as 1
  3: These are Hdiv methods that transform functions using the contravariant Piola transform (CONTRAVARIANT_PIOLA_TRANSFORM)
.ve

.seealso: `PetscDualSpace`, `PetscDualSpacePullback()`, `PetscDualSpacePushforward()`, `PetscDualSpaceTransform()`, `PetscDualSpaceTransformType`
@*/
PetscErrorCode PetscDualSpaceGetDeRahm(PetscDualSpace dsp, PetscInt *k)
{
  PetscInt dim;

  PetscFunctionBeginHot;
  PetscValidHeaderSpecific(dsp, PETSCDUALSPACE_CLASSID, 1);
  PetscAssertPointer(k, 2);
  dim = dsp->dm->dim;
  if (!dsp->k) *k = IDENTITY_TRANSFORM;
  else if (dsp->k == 1) *k = COVARIANT_PIOLA_TRANSFORM;
  else if (dsp->k == -(dim - 1)) *k = CONTRAVARIANT_PIOLA_TRANSFORM;
  else SETERRQ(PETSC_COMM_SELF, PETSC_ERR_PLIB, "Unsupported transformation");
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceTransform - Transform the function values

  Input Parameters:
+ dsp       - The `PetscDualSpace`
. trans     - The type of transform
. isInverse - Flag to invert the transform
. fegeom    - The cell geometry
. Nv        - The number of function samples
. Nc        - The number of function components
- vals      - The function values

  Output Parameter:
. vals - The transformed function values

  Level: intermediate

  Note:
  This only handles transformations when the embedding dimension of the geometry in fegeom is the same as the reference dimension.

.seealso: `PetscDualSpace`, `PetscDualSpaceTransformGradient()`, `PetscDualSpaceTransformHessian()`, `PetscDualSpacePullback()`, `PetscDualSpacePushforward()`, `PetscDualSpaceTransformType`
@*/
PetscErrorCode PetscDualSpaceTransform(PetscDualSpace dsp, PetscDualSpaceTransformType trans, PetscBool isInverse, PetscFEGeom *fegeom, PetscInt Nv, PetscInt Nc, PetscScalar vals[])
{
  PetscReal Jstar[9] = {0};
  PetscInt  dim, v, c, Nk;

  PetscFunctionBeginHot;
  PetscValidHeaderSpecific(dsp, PETSCDUALSPACE_CLASSID, 1);
  PetscAssertPointer(fegeom, 4);
  PetscAssertPointer(vals, 7);
  /* TODO: not handling dimEmbed != dim right now */
  dim = dsp->dm->dim;
  /* No change needed for 0-forms */
  if (!dsp->k) PetscFunctionReturn(PETSC_SUCCESS);
  PetscCall(PetscDTBinomialInt(dim, PetscAbsInt(dsp->k), &Nk));
  /* TODO: use fegeom->isAffine */
  PetscCall(PetscDTAltVPullbackMatrix(dim, dim, isInverse ? fegeom->J : fegeom->invJ, dsp->k, Jstar));
  for (v = 0; v < Nv; ++v) {
    switch (Nk) {
    case 1:
      for (c = 0; c < Nc; c++) vals[v * Nc + c] *= Jstar[0];
      break;
    case 2:
      for (c = 0; c < Nc; c += 2) DMPlex_Mult2DReal_Internal(Jstar, 1, &vals[v * Nc + c], &vals[v * Nc + c]);
      break;
    case 3:
      for (c = 0; c < Nc; c += 3) DMPlex_Mult3DReal_Internal(Jstar, 1, &vals[v * Nc + c], &vals[v * Nc + c]);
      break;
    default:
      SETERRQ(PetscObjectComm((PetscObject)dsp), PETSC_ERR_ARG_OUTOFRANGE, "Unsupported form size %" PetscInt_FMT " for transformation", Nk);
    }
  }
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceTransformGradient - Transform the function gradient values

  Input Parameters:
+ dsp       - The `PetscDualSpace`
. trans     - The type of transform
. isInverse - Flag to invert the transform
. fegeom    - The cell geometry
. Nv        - The number of function gradient samples
. Nc        - The number of function components
- vals      - The function gradient values

  Output Parameter:
. vals - The transformed function gradient values

  Level: intermediate

  Note:
  This only handles transformations when the embedding dimension of the geometry in fegeom is the same as the reference dimension.

.seealso: `PetscDualSpace`, `PetscDualSpaceTransform()`, `PetscDualSpacePullback()`, `PetscDualSpacePushforward()`, `PetscDualSpaceTransformType`
@*/
PetscErrorCode PetscDualSpaceTransformGradient(PetscDualSpace dsp, PetscDualSpaceTransformType trans, PetscBool isInverse, PetscFEGeom *fegeom, PetscInt Nv, PetscInt Nc, PetscScalar vals[])
{
  const PetscInt dim = dsp->dm->dim, dE = fegeom->dimEmbed;
  PetscInt       v, c, d;

  PetscFunctionBeginHot;
  PetscValidHeaderSpecific(dsp, PETSCDUALSPACE_CLASSID, 1);
  PetscAssertPointer(fegeom, 4);
  PetscAssertPointer(vals, 7);
  PetscAssert(dE > 0, PETSC_COMM_SELF, PETSC_ERR_ARG_OUTOFRANGE, "Invalid embedding dimension %" PetscInt_FMT, dE);
  /* Transform gradient */
  if (dim == dE) {
    for (v = 0; v < Nv; ++v) {
      for (c = 0; c < Nc; ++c) {
        switch (dim) {
        case 1:
          vals[(v * Nc + c) * dim] *= fegeom->invJ[0];
          break;
        case 2:
          DMPlex_MultTranspose2DReal_Internal(fegeom->invJ, 1, &vals[(v * Nc + c) * dim], &vals[(v * Nc + c) * dim]);
          break;
        case 3:
          DMPlex_MultTranspose3DReal_Internal(fegeom->invJ, 1, &vals[(v * Nc + c) * dim], &vals[(v * Nc + c) * dim]);
          break;
        default:
          SETERRQ(PetscObjectComm((PetscObject)dsp), PETSC_ERR_ARG_OUTOFRANGE, "Unsupported dim %" PetscInt_FMT " for transformation", dim);
        }
      }
    }
  } else {
    for (v = 0; v < Nv; ++v) {
      for (c = 0; c < Nc; ++c) DMPlex_MultTransposeReal_Internal(fegeom->invJ, dim, dE, 1, &vals[(v * Nc + c) * dE], &vals[(v * Nc + c) * dE]);
    }
  }
  /* Assume its a vector, otherwise assume its a bunch of scalars */
  if (Nc == 1 || Nc != dim) PetscFunctionReturn(PETSC_SUCCESS);
  switch (trans) {
  case IDENTITY_TRANSFORM:
    break;
  case COVARIANT_PIOLA_TRANSFORM: /* Covariant Piola mapping $\sigma^*(F) = J^{-T} F \circ \phi^{-1)$ */
    if (isInverse) {
      for (v = 0; v < Nv; ++v) {
        for (d = 0; d < dim; ++d) {
          switch (dim) {
          case 2:
            DMPlex_MultTranspose2DReal_Internal(fegeom->J, dim, &vals[v * Nc * dim + d], &vals[v * Nc * dim + d]);
            break;
          case 3:
            DMPlex_MultTranspose3DReal_Internal(fegeom->J, dim, &vals[v * Nc * dim + d], &vals[v * Nc * dim + d]);
            break;
          default:
            SETERRQ(PetscObjectComm((PetscObject)dsp), PETSC_ERR_ARG_OUTOFRANGE, "Unsupported dim %" PetscInt_FMT " for transformation", dim);
          }
        }
      }
    } else {
      for (v = 0; v < Nv; ++v) {
        for (d = 0; d < dim; ++d) {
          switch (dim) {
          case 2:
            DMPlex_MultTranspose2DReal_Internal(fegeom->invJ, dim, &vals[v * Nc * dim + d], &vals[v * Nc * dim + d]);
            break;
          case 3:
            DMPlex_MultTranspose3DReal_Internal(fegeom->invJ, dim, &vals[v * Nc * dim + d], &vals[v * Nc * dim + d]);
            break;
          default:
            SETERRQ(PetscObjectComm((PetscObject)dsp), PETSC_ERR_ARG_OUTOFRANGE, "Unsupported dim %" PetscInt_FMT " for transformation", dim);
          }
        }
      }
    }
    break;
  case CONTRAVARIANT_PIOLA_TRANSFORM: /* Contravariant Piola mapping $\sigma^*(F) = \frac{1}{|\det J|} J F \circ \phi^{-1}$ */
    if (isInverse) {
      for (v = 0; v < Nv; ++v) {
        for (d = 0; d < dim; ++d) {
          switch (dim) {
          case 2:
            DMPlex_Mult2DReal_Internal(fegeom->invJ, dim, &vals[v * Nc * dim + d], &vals[v * Nc * dim + d]);
            break;
          case 3:
            DMPlex_Mult3DReal_Internal(fegeom->invJ, dim, &vals[v * Nc * dim + d], &vals[v * Nc * dim + d]);
            break;
          default:
            SETERRQ(PetscObjectComm((PetscObject)dsp), PETSC_ERR_ARG_OUTOFRANGE, "Unsupported dim %" PetscInt_FMT " for transformation", dim);
          }
          for (c = 0; c < Nc; ++c) vals[(v * Nc + c) * dim + d] *= fegeom->detJ[0];
        }
      }
    } else {
      for (v = 0; v < Nv; ++v) {
        for (d = 0; d < dim; ++d) {
          switch (dim) {
          case 2:
            DMPlex_Mult2DReal_Internal(fegeom->J, dim, &vals[v * Nc * dim + d], &vals[v * Nc * dim + d]);
            break;
          case 3:
            DMPlex_Mult3DReal_Internal(fegeom->J, dim, &vals[v * Nc * dim + d], &vals[v * Nc * dim + d]);
            break;
          default:
            SETERRQ(PetscObjectComm((PetscObject)dsp), PETSC_ERR_ARG_OUTOFRANGE, "Unsupported dim %" PetscInt_FMT " for transformation", dim);
          }
          for (c = 0; c < Nc; ++c) vals[(v * Nc + c) * dim + d] /= fegeom->detJ[0];
        }
      }
    }
    break;
  }
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpaceTransformHessian - Transform the function Hessian values

  Input Parameters:
+ dsp       - The `PetscDualSpace`
. trans     - The type of transform
. isInverse - Flag to invert the transform
. fegeom    - The cell geometry
. Nv        - The number of function Hessian samples
. Nc        - The number of function components
- vals      - The function gradient values

  Output Parameter:
. vals - The transformed function Hessian values

  Level: intermediate

  Note:
  This only handles transformations when the embedding dimension of the geometry in fegeom is the same as the reference dimension.

.seealso: `PetscDualSpace`, `PetscDualSpaceTransform()`, `PetscDualSpacePullback()`, `PetscDualSpacePushforward()`, `PetscDualSpaceTransformType`
@*/
PetscErrorCode PetscDualSpaceTransformHessian(PetscDualSpace dsp, PetscDualSpaceTransformType trans, PetscBool isInverse, PetscFEGeom *fegeom, PetscInt Nv, PetscInt Nc, PetscScalar vals[])
{
  const PetscInt dim = dsp->dm->dim, dE = fegeom->dimEmbed;
  PetscInt       v, c;

  PetscFunctionBeginHot;
  PetscValidHeaderSpecific(dsp, PETSCDUALSPACE_CLASSID, 1);
  PetscAssertPointer(fegeom, 4);
  PetscAssertPointer(vals, 7);
  PetscAssert(dE > 0, PETSC_COMM_SELF, PETSC_ERR_ARG_OUTOFRANGE, "Invalid embedding dimension %" PetscInt_FMT, dE);
  /* Transform Hessian: J^{-T}_{ik} J^{-T}_{jl} H(f)_{kl} = J^{-T}_{ik} H(f)_{kl} J^{-1}_{lj} */
  if (dim == dE) {
    for (v = 0; v < Nv; ++v) {
      for (c = 0; c < Nc; ++c) {
        switch (dim) {
        case 1:
          vals[(v * Nc + c) * dim * dim] *= PetscSqr(fegeom->invJ[0]);
          break;
        case 2:
          DMPlex_PTAP2DReal_Internal(fegeom->invJ, &vals[(v * Nc + c) * dim * dim], &vals[(v * Nc + c) * dim * dim]);
          break;
        case 3:
          DMPlex_PTAP3DReal_Internal(fegeom->invJ, &vals[(v * Nc + c) * dim * dim], &vals[(v * Nc + c) * dim * dim]);
          break;
        default:
          SETERRQ(PetscObjectComm((PetscObject)dsp), PETSC_ERR_ARG_OUTOFRANGE, "Unsupported dim %" PetscInt_FMT " for transformation", dim);
        }
      }
    }
  } else {
    for (v = 0; v < Nv; ++v) {
      for (c = 0; c < Nc; ++c) DMPlex_PTAPReal_Internal(fegeom->invJ, dim, dE, &vals[(v * Nc + c) * dE * dE], &vals[(v * Nc + c) * dE * dE]);
    }
  }
  /* Assume its a vector, otherwise assume its a bunch of scalars */
  if (Nc == 1 || Nc != dim) PetscFunctionReturn(PETSC_SUCCESS);
  switch (trans) {
  case IDENTITY_TRANSFORM:
    break;
  case COVARIANT_PIOLA_TRANSFORM: /* Covariant Piola mapping $\sigma^*(F) = J^{-T} F \circ \phi^{-1)$ */
    SETERRQ(PETSC_COMM_SELF, PETSC_ERR_SUP, "Piola mapping for Hessians not yet supported");
  case CONTRAVARIANT_PIOLA_TRANSFORM: /* Contravariant Piola mapping $\sigma^*(F) = \frac{1}{|\det J|} J F \circ \phi^{-1}$ */
    SETERRQ(PETSC_COMM_SELF, PETSC_ERR_SUP, "Piola mapping for Hessians not yet supported");
  }
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpacePullback - Transform the given functional so that it operates on real space, rather than the reference element. Operationally, this means that we map the function evaluations depending on continuity requirements of our finite element method.

  Input Parameters:
+ dsp       - The `PetscDualSpace`
. fegeom    - The geometry for this cell
. Nq        - The number of function samples
. Nc        - The number of function components
- pointEval - The function values

  Output Parameter:
. pointEval - The transformed function values

  Level: advanced

  Notes:
  Functions transform in a complementary way (pushforward) to functionals, so that the scalar product is invariant. The type of transform is dependent on the associated k-simplex from the DeRahm complex.

  This only handles transformations when the embedding dimension of the geometry in fegeom is the same as the reference dimension.

.seealso: `PetscDualSpace`, `PetscDualSpacePushforward()`, `PetscDualSpaceTransform()`, `PetscDualSpaceGetDeRahm()`
@*/
PetscErrorCode PetscDualSpacePullback(PetscDualSpace dsp, PetscFEGeom *fegeom, PetscInt Nq, PetscInt Nc, PetscScalar pointEval[])
{
  PetscDualSpaceTransformType trans;
  PetscInt                    k;

  PetscFunctionBeginHot;
  PetscValidHeaderSpecific(dsp, PETSCDUALSPACE_CLASSID, 1);
  PetscAssertPointer(fegeom, 2);
  PetscAssertPointer(pointEval, 5);
  /* The dualspace dofs correspond to some simplex in the DeRahm complex, which we label by k.
     This determines their transformation properties. */
  PetscCall(PetscDualSpaceGetDeRahm(dsp, &k));
  switch (k) {
  case 0: /* H^1 point evaluations */
    trans = IDENTITY_TRANSFORM;
    break;
  case 1: /* Hcurl preserves tangential edge traces  */
    trans = COVARIANT_PIOLA_TRANSFORM;
    break;
  case 2:
  case 3: /* Hdiv preserve normal traces */
    trans = CONTRAVARIANT_PIOLA_TRANSFORM;
    break;
  default:
    SETERRQ(PetscObjectComm((PetscObject)dsp), PETSC_ERR_ARG_OUTOFRANGE, "Unsupported simplex dim %" PetscInt_FMT " for transformation", k);
  }
  PetscCall(PetscDualSpaceTransform(dsp, trans, PETSC_TRUE, fegeom, Nq, Nc, pointEval));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpacePushforward - Transform the given function so that it operates on real space, rather than the reference element. Operationally, this means that we map the function evaluations depending on continuity requirements of our finite element method.

  Input Parameters:
+ dsp       - The `PetscDualSpace`
. fegeom    - The geometry for this cell
. Nq        - The number of function samples
. Nc        - The number of function components
- pointEval - The function values

  Output Parameter:
. pointEval - The transformed function values

  Level: advanced

  Notes:
  Functionals transform in a complementary way (pullback) to functions, so that the scalar product is invariant. The type of transform is dependent on the associated k-simplex from the DeRahm complex.

  This only handles transformations when the embedding dimension of the geometry in fegeom is the same as the reference dimension.

.seealso: `PetscDualSpace`, `PetscDualSpacePullback()`, `PetscDualSpaceTransform()`, `PetscDualSpaceGetDeRahm()`
@*/
PetscErrorCode PetscDualSpacePushforward(PetscDualSpace dsp, PetscFEGeom *fegeom, PetscInt Nq, PetscInt Nc, PetscScalar pointEval[])
{
  PetscDualSpaceTransformType trans;
  PetscInt                    k;

  PetscFunctionBeginHot;
  PetscValidHeaderSpecific(dsp, PETSCDUALSPACE_CLASSID, 1);
  PetscAssertPointer(fegeom, 2);
  PetscAssertPointer(pointEval, 5);
  /* The dualspace dofs correspond to some simplex in the DeRahm complex, which we label by k.
     This determines their transformation properties. */
  PetscCall(PetscDualSpaceGetDeRahm(dsp, &k));
  switch (k) {
  case 0: /* H^1 point evaluations */
    trans = IDENTITY_TRANSFORM;
    break;
  case 1: /* Hcurl preserves tangential edge traces  */
    trans = COVARIANT_PIOLA_TRANSFORM;
    break;
  case 2:
  case 3: /* Hdiv preserve normal traces */
    trans = CONTRAVARIANT_PIOLA_TRANSFORM;
    break;
  default:
    SETERRQ(PetscObjectComm((PetscObject)dsp), PETSC_ERR_ARG_OUTOFRANGE, "Unsupported simplex dim %" PetscInt_FMT " for transformation", k);
  }
  PetscCall(PetscDualSpaceTransform(dsp, trans, PETSC_FALSE, fegeom, Nq, Nc, pointEval));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpacePushforwardGradient - Transform the given function gradient so that it operates on real space, rather than the reference element. Operationally, this means that we map the function evaluations depending on continuity requirements of our finite element method.

  Input Parameters:
+ dsp       - The `PetscDualSpace`
. fegeom    - The geometry for this cell
. Nq        - The number of function gradient samples
. Nc        - The number of function components
- pointEval - The function gradient values

  Output Parameter:
. pointEval - The transformed function gradient values

  Level: advanced

  Notes:
  Functionals transform in a complementary way (pullback) to functions, so that the scalar product is invariant. The type of transform is dependent on the associated k-simplex from the DeRahm complex.

  This only handles transformations when the embedding dimension of the geometry in fegeom is the same as the reference dimension.

.seealso: `PetscDualSpace`, `PetscDualSpacePushforward()`, `PetscDualSpacePullback()`, `PetscDualSpaceTransform()`, `PetscDualSpaceGetDeRahm()`
@*/
PetscErrorCode PetscDualSpacePushforwardGradient(PetscDualSpace dsp, PetscFEGeom *fegeom, PetscInt Nq, PetscInt Nc, PetscScalar pointEval[])
{
  PetscDualSpaceTransformType trans;
  PetscInt                    k;

  PetscFunctionBeginHot;
  PetscValidHeaderSpecific(dsp, PETSCDUALSPACE_CLASSID, 1);
  PetscAssertPointer(fegeom, 2);
  PetscAssertPointer(pointEval, 5);
  /* The dualspace dofs correspond to some simplex in the DeRahm complex, which we label by k.
     This determines their transformation properties. */
  PetscCall(PetscDualSpaceGetDeRahm(dsp, &k));
  switch (k) {
  case 0: /* H^1 point evaluations */
    trans = IDENTITY_TRANSFORM;
    break;
  case 1: /* Hcurl preserves tangential edge traces  */
    trans = COVARIANT_PIOLA_TRANSFORM;
    break;
  case 2:
  case 3: /* Hdiv preserve normal traces */
    trans = CONTRAVARIANT_PIOLA_TRANSFORM;
    break;
  default:
    SETERRQ(PetscObjectComm((PetscObject)dsp), PETSC_ERR_ARG_OUTOFRANGE, "Unsupported simplex dim %" PetscInt_FMT " for transformation", k);
  }
  PetscCall(PetscDualSpaceTransformGradient(dsp, trans, PETSC_FALSE, fegeom, Nq, Nc, pointEval));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  PetscDualSpacePushforwardHessian - Transform the given function Hessian so that it operates on real space, rather than the reference element. Operationally, this means that we map the function evaluations depending on continuity requirements of our finite element method.

  Input Parameters:
+ dsp       - The `PetscDualSpace`
. fegeom    - The geometry for this cell
. Nq        - The number of function Hessian samples
. Nc        - The number of function components
- pointEval - The function gradient values

  Output Parameter:
. pointEval - The transformed function Hessian values

  Level: advanced

  Notes:
  Functionals transform in a complementary way (pullback) to functions, so that the scalar product is invariant. The type of transform is dependent on the associated k-simplex from the DeRahm complex.

  This only handles transformations when the embedding dimension of the geometry in fegeom is the same as the reference dimension.

.seealso: `PetscDualSpace`, `PetscDualSpacePushforward()`, `PetscDualSpacePullback()`, `PetscDualSpaceTransform()`, `PetscDualSpaceGetDeRahm()`
@*/
PetscErrorCode PetscDualSpacePushforwardHessian(PetscDualSpace dsp, PetscFEGeom *fegeom, PetscInt Nq, PetscInt Nc, PetscScalar pointEval[])
{
  PetscDualSpaceTransformType trans;
  PetscInt                    k;

  PetscFunctionBeginHot;
  PetscValidHeaderSpecific(dsp, PETSCDUALSPACE_CLASSID, 1);
  PetscAssertPointer(fegeom, 2);
  PetscAssertPointer(pointEval, 5);
  /* The dualspace dofs correspond to some simplex in the DeRahm complex, which we label by k.
     This determines their transformation properties. */
  PetscCall(PetscDualSpaceGetDeRahm(dsp, &k));
  switch (k) {
  case 0: /* H^1 point evaluations */
    trans = IDENTITY_TRANSFORM;
    break;
  case 1: /* Hcurl preserves tangential edge traces  */
    trans = COVARIANT_PIOLA_TRANSFORM;
    break;
  case 2:
  case 3: /* Hdiv preserve normal traces */
    trans = CONTRAVARIANT_PIOLA_TRANSFORM;
    break;
  default:
    SETERRQ(PetscObjectComm((PetscObject)dsp), PETSC_ERR_ARG_OUTOFRANGE, "Unsupported simplex dim %" PetscInt_FMT " for transformation", k);
  }
  PetscCall(PetscDualSpaceTransformHessian(dsp, trans, PETSC_FALSE, fegeom, Nq, Nc, pointEval));
  PetscFunctionReturn(PETSC_SUCCESS);
}