/*
   This file contains some simple default routines.
   These routines should be SHORT, since they will be included in every
   executable image that uses the iterative routines (note that, through
   the registry system, we provide a way to load only the truly necessary
   files)
 */
#include <petsc/private/kspimpl.h> /*I "petscksp.h" I*/
#include <petscdmshell.h>
#include <petscdraw.h>

/*@
  KSPGetResidualNorm - Gets the last (possibly approximate and/or preconditioned) residual norm that has been computed.

  Not Collective

  Input Parameter:
. ksp - the iterative context

  Output Parameter:
. rnorm - residual norm

  Level: intermediate

  Notes:
  For some methods, such as `KSPGMRES`, the norm is not computed directly from the residual.

  The type of norm used by the method can be controlled with `KSPSetNormType()`

  Certain solvers, under certain conditions, may not compute the final residual norm in an iteration, in that case the previous norm is returned.

.seealso: [](ch_ksp), `KSP`, `KSPSetNormType()`, `KSPBuildResidual()`, `KSPNormType`
@*/
PetscErrorCode KSPGetResidualNorm(KSP ksp, PetscReal *rnorm)
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(ksp, KSP_CLASSID, 1);
  PetscAssertPointer(rnorm, 2);
  *rnorm = ksp->rnorm;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@
  KSPGetIterationNumber - Gets the current iteration number; if the `KSPSolve()` is complete, returns the number of iterations used.

  Not Collective

  Input Parameter:
. ksp - the iterative context

  Output Parameter:
. its - number of iterations

  Level: intermediate

  Note:
  During the ith iteration this returns i-1

.seealso: [](ch_ksp), `KSP`, `KSPGetResidualNorm()`, `KSPBuildResidual()`, `KSPGetTotalIterations()`
@*/
PetscErrorCode KSPGetIterationNumber(KSP ksp, PetscInt *its)
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(ksp, KSP_CLASSID, 1);
  PetscAssertPointer(its, 2);
  *its = ksp->its;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@
  KSPGetTotalIterations - Gets the total number of iterations this `KSP` object has performed since was created, counted over all linear solves

  Not Collective

  Input Parameter:
. ksp - the iterative context

  Output Parameter:
. its - total number of iterations

  Level: intermediate

  Note:
  Use `KSPGetIterationNumber()` to get the count for the most recent solve only
  If this is called within a `KSPSolve()` (such as in a `KSPMonitor` routine) then it does not include iterations within that current solve

.seealso: [](ch_ksp), `KSP`, `KSPBuildResidual()`, `KSPGetResidualNorm()`, `KSPGetIterationNumber()`
@*/
PetscErrorCode KSPGetTotalIterations(KSP ksp, PetscInt *its)
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(ksp, KSP_CLASSID, 1);
  PetscAssertPointer(its, 2);
  *its = ksp->totalits;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  KSPMonitorResidual - Print the (possibly preconditioned, possibly approximate) residual norm at each iteration of an iterative solver.

  Collective

  Input Parameters:
+ ksp   - iterative context
. n     - iteration number
. rnorm - (preconditioned) residual norm value (may be estimated).
- vf    - The viewer context

  Options Database Key:
. -ksp_monitor - Activates `KSPMonitorResidual()` to print the norm value at each iteration

  Level: intermediate

  Note:
  For some methods, such as `KSPGMRES`, the norm is not computed directly from the residual.

  The type of norm used by the method can be controlled with `KSPSetNormType()`

  This is not called directly by users, rather one calls `KSPMonitorSet()`, with this function as an argument, to cause the monitor
  to be used during the `KSP` solve.

.seealso: [](ch_ksp), `KSP`, `KSPMonitorSet()`, `KSPMonitorTrueResidual()`, `KSPMonitorResidualView()`, `KSPMonitorResidualDrawLG()`,
          `KSPMonitorResidualRange()`, `KSPMonitorTrueResidualDraw()`, `KSPMonitorTrueResidualDrawLG()`, `KSPMonitorTrueResidualMax()`,
          `KSPMonitorSingularValue()`, `KSPMonitorSolutionDrawLG()`, `KSPMonitorSolutionDraw()`, `KSPMonitorSolution()`,
          `KSPMonitorErrorDrawLG()`, `KSPMonitorErrorDraw()`, `KSPMonitorError()`
@*/
PetscErrorCode KSPMonitorResidual(KSP ksp, PetscInt n, PetscReal rnorm, PetscViewerAndFormat *vf)
{
  PetscViewer       viewer = vf->viewer;
  PetscViewerFormat format = vf->format;
  PetscInt          tablevel;
  const char       *prefix;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(viewer, PETSC_VIEWER_CLASSID, 4);
  PetscCall(PetscObjectGetTabLevel((PetscObject)ksp, &tablevel));
  PetscCall(PetscObjectGetOptionsPrefix((PetscObject)ksp, &prefix));
  PetscCall(PetscViewerPushFormat(viewer, format));
  PetscCall(PetscViewerASCIIAddTab(viewer, tablevel));
  if (n == 0 && prefix) PetscCall(PetscViewerASCIIPrintf(viewer, "  Residual norms for %s solve.\n", prefix));
  PetscCall(PetscViewerASCIIPrintf(viewer, "%3" PetscInt_FMT " KSP Residual norm %14.12e\n", n, (double)rnorm));
  PetscCall(PetscViewerASCIISubtractTab(viewer, tablevel));
  PetscCall(PetscViewerPopFormat(viewer));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  KSPMonitorResidualView - Plots the (possibly preconditioned) residual at each iteration of an iterative solver.

  Collective

  Input Parameters:
+ ksp   - iterative context
. n     - iteration number
. rnorm - 2-norm (preconditioned) residual value (may be estimated).
- vf    - The viewer context

  Options Database Key:
. -ksp_monitor viewertype - Activates `KSPMonitorResidualView()`

  Level: intermediate

  Note:
  This is not called directly by users, rather one calls `KSPMonitorSet()`, with this function as an argument, to cause the monitor
  to be used during the `KSP` solve.

.seealso: [](ch_ksp), `KSP`, `KSPMonitorSet()`, `KSPMonitorTrueResidual()`, `KSPMonitorResidual()`, `KSPMonitorResidualDrawLG()`
@*/
PetscErrorCode KSPMonitorResidualView(KSP ksp, PetscInt n, PetscReal rnorm, PetscViewerAndFormat *vf)
{
  PetscViewer       viewer = vf->viewer;
  PetscViewerFormat format = vf->format;
  Vec               r;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(viewer, PETSC_VIEWER_CLASSID, 4);
  PetscCall(PetscViewerPushFormat(viewer, format));
  PetscCall(KSPBuildResidual(ksp, NULL, NULL, &r));
  PetscCall(PetscObjectSetName((PetscObject)r, "Residual"));
  PetscCall(PetscObjectCompose((PetscObject)r, "__Vec_bc_zero__", (PetscObject)ksp));
  PetscCall(VecView(r, viewer));
  PetscCall(PetscObjectCompose((PetscObject)r, "__Vec_bc_zero__", NULL));
  PetscCall(VecDestroy(&r));
  PetscCall(PetscViewerPopFormat(viewer));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  KSPMonitorResidualDrawLG - Plots the (possibly preconditioned) residual norm at each iteration of an iterative solver.

  Collective

  Input Parameters:
+ ksp   - iterative context
. n     - iteration number
. rnorm - 2-norm (preconditioned) residual value (may be estimated).
- vf    - The viewer context

  Options Database Key:
. -ksp_monitor draw::draw_lg - Activates `KSPMonitorResidualDrawLG()`

  Level: intermediate

  Notes:
  This is not called directly by users, rather one calls `KSPMonitorSet()`, with this function as an argument, to cause the monitor
  to be used during the `KSP` solve.

  Use `KSPMonitorResidualDrawLGCreate()` to create the context used with this monitor

.seealso: [](ch_ksp), `KSP`, `PETSCVIEWERDRAW`, `KSPMonitorSet()`, `KSPMonitorTrueResidual()`, `KSPMonitorResidualView()`, `KSPMonitorResidual()`
@*/
PetscErrorCode KSPMonitorResidualDrawLG(KSP ksp, PetscInt n, PetscReal rnorm, PetscViewerAndFormat *vf)
{
  PetscViewer        viewer = vf->viewer;
  PetscViewerFormat  format = vf->format;
  PetscDrawLG        lg;
  KSPConvergedReason reason;
  PetscReal          x, y;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(viewer, PETSC_VIEWER_CLASSID, 4);
  PetscCall(PetscViewerPushFormat(viewer, format));
  PetscCall(PetscViewerDrawGetDrawLG(viewer, 0, &lg));
  if (!n) PetscCall(PetscDrawLGReset(lg));
  x = (PetscReal)n;
  if (rnorm > 0.0) y = PetscLog10Real(rnorm);
  else y = -15.0;
  PetscCall(PetscDrawLGAddPoint(lg, &x, &y));
  PetscCall(KSPGetConvergedReason(ksp, &reason));
  if (n <= 20 || !(n % 5) || reason) {
    PetscCall(PetscDrawLGDraw(lg));
    PetscCall(PetscDrawLGSave(lg));
  }
  PetscCall(PetscViewerPopFormat(viewer));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  KSPMonitorResidualDrawLGCreate - Creates the context for the (possibly preconditioned) residual norm monitor `KSPMonitorResidualDrawLG()`

  Collective

  Input Parameters:
+ viewer - The `PetscViewer` of type `PETSCVIEWERDRAW`
. format - The viewer format
- ctx    - An optional user context

  Output Parameter:
. vf - The viewer context

  Level: intermediate

.seealso: [](ch_ksp), `KSP`, `PETSCVIEWERDRAW`, `KSPMonitorSet()`, `KSPMonitorTrueResidual()`, `KSPMonitorResidualDrawLG()`,
          `PetscViewerFormat`, `PetscViewer`, `PetscViewerAndFormat`
@*/
PetscErrorCode KSPMonitorResidualDrawLGCreate(PetscViewer viewer, PetscViewerFormat format, PetscCtx ctx, PetscViewerAndFormat **vf)
{
  PetscFunctionBegin;
  PetscCall(PetscViewerAndFormatCreate(viewer, format, vf));
  (*vf)->data = ctx;
  PetscCall(PetscViewerMonitorLGSetUp(viewer, NULL, NULL, "Log Residual Norm", 1, NULL, PETSC_DECIDE, PETSC_DECIDE, 400, 300));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*
  This is the same as KSPMonitorResidual() except it prints fewer digits of the residual as the residual gets smaller.
  This is because the later digits are meaningless and are often different on different machines; by using this routine different
  machines will usually generate the same output.

  Deprecated: Intentionally has no manual page
*/
PetscErrorCode KSPMonitorResidualShort(KSP ksp, PetscInt its, PetscReal fnorm, PetscViewerAndFormat *vf)
{
  PetscViewer       viewer = vf->viewer;
  PetscViewerFormat format = vf->format;
  PetscInt          tablevel;
  const char       *prefix;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(viewer, PETSC_VIEWER_CLASSID, 4);
  PetscCall(PetscObjectGetTabLevel((PetscObject)ksp, &tablevel));
  PetscCall(PetscObjectGetOptionsPrefix((PetscObject)ksp, &prefix));
  PetscCall(PetscViewerPushFormat(viewer, format));
  PetscCall(PetscViewerASCIIAddTab(viewer, tablevel));
  if (its == 0 && prefix) PetscCall(PetscViewerASCIIPrintf(viewer, "  Residual norms for %s solve.\n", prefix));
  if (fnorm > 1.e-9) PetscCall(PetscViewerASCIIPrintf(viewer, "%3" PetscInt_FMT " KSP Residual norm %g\n", its, (double)fnorm));
  else if (fnorm > 1.e-11) PetscCall(PetscViewerASCIIPrintf(viewer, "%3" PetscInt_FMT " KSP Residual norm %5.3e\n", its, (double)fnorm));
  else PetscCall(PetscViewerASCIIPrintf(viewer, "%3" PetscInt_FMT " KSP Residual norm < 1.e-11\n", its));
  PetscCall(PetscViewerASCIISubtractTab(viewer, tablevel));
  PetscCall(PetscViewerPopFormat(viewer));
  PetscFunctionReturn(PETSC_SUCCESS);
}

PetscErrorCode KSPMonitorRange_Private(KSP ksp, PetscInt it, PetscReal *per)
{
  Vec                resid;
  const PetscScalar *r;
  PetscReal          rmax, pwork;
  PetscInt           i, n, N;

  PetscFunctionBegin;
  PetscCall(KSPBuildResidual(ksp, NULL, NULL, &resid));
  PetscCall(VecNorm(resid, NORM_INFINITY, &rmax));
  PetscCall(VecGetLocalSize(resid, &n));
  PetscCall(VecGetSize(resid, &N));
  PetscCall(VecGetArrayRead(resid, &r));
  pwork = 0.0;
  for (i = 0; i < n; ++i) pwork += (PetscAbsScalar(r[i]) > .20 * rmax);
  PetscCall(VecRestoreArrayRead(resid, &r));
  PetscCall(VecDestroy(&resid));
  PetscCallMPI(MPIU_Allreduce(&pwork, per, 1, MPIU_REAL, MPIU_SUM, PetscObjectComm((PetscObject)ksp)));
  *per = *per / N;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  KSPMonitorResidualRange - Prints the percentage of residual elements that are more than 10 percent of the maximum value.

  Collective

  Input Parameters:
+ ksp   - iterative context
. it    - iteration number
. rnorm - 2-norm (preconditioned) residual value (may be estimated).
- vf    - The viewer context

  Options Database Key:
. -ksp_monitor_range - Activates `KSPMonitorResidualRange()`

  Level: intermediate

  Note:
  This is not called directly by users, rather one calls `KSPMonitorSet()`, with this function as an argument, to cause the monitor
  to be used during the `KSP` solve.

.seealso: [](ch_ksp), `KSP`, `KSPMonitorSet()`, `KSPMonitorResidual()`
@*/
PetscErrorCode KSPMonitorResidualRange(KSP ksp, PetscInt it, PetscReal rnorm, PetscViewerAndFormat *vf)
{
  static PetscReal  prev;
  PetscViewer       viewer = vf->viewer;
  PetscViewerFormat format = vf->format;
  PetscInt          tablevel;
  const char       *prefix;
  PetscReal         perc, rel;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(viewer, PETSC_VIEWER_CLASSID, 4);
  PetscCall(PetscObjectGetTabLevel((PetscObject)ksp, &tablevel));
  PetscCall(PetscObjectGetOptionsPrefix((PetscObject)ksp, &prefix));
  PetscCall(PetscViewerPushFormat(viewer, format));
  PetscCall(PetscViewerASCIIAddTab(viewer, tablevel));
  if (!it) prev = rnorm;
  if (it == 0 && prefix) PetscCall(PetscViewerASCIIPrintf(viewer, "  Residual norms for %s solve.\n", prefix));
  PetscCall(KSPMonitorRange_Private(ksp, it, &perc));
  rel  = (prev - rnorm) / prev;
  prev = rnorm;
  PetscCall(PetscViewerASCIIPrintf(viewer, "%3" PetscInt_FMT " KSP preconditioned resid norm %14.12e Percent values above 20 percent of maximum %5.2f relative decrease %5.2e ratio %5.2e\n", it, (double)rnorm, (double)(100 * perc), (double)rel, (double)(rel / perc)));
  PetscCall(PetscViewerASCIISubtractTab(viewer, tablevel));
  PetscCall(PetscViewerPopFormat(viewer));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  KSPMonitorTrueResidual - Prints the true residual norm, as well as the (possibly preconditioned, possibly approximate) residual norm,
  at each iteration of a `KSPSolve()` iterative solver.

  Collective

  Input Parameters:
+ ksp   - iterative context
. n     - iteration number
. rnorm - 2-norm (preconditioned) residual value (may be estimated).
- vf    - The viewer context

  Options Database Key:
. -ksp_monitor_true_residual - Activates `KSPMonitorTrueResidual()` to print both norm values at each iteration

  Level: intermediate

  Notes:
  When using right preconditioning, the two norm values are equivalent.

  This is not called directly by users, rather one calls `KSPMonitorSet()`, with this function as an argument, to cause the monitor
  to be used during the `KSP` solve.

.seealso: [](ch_ksp), `KSP`, `KSPMonitorSet()`, `KSPMonitorResidual()`, `KSPMonitorTrueResidualMaxNorm()`, `PetscViewerAndFormat`
@*/
PetscErrorCode KSPMonitorTrueResidual(KSP ksp, PetscInt n, PetscReal rnorm, PetscViewerAndFormat *vf)
{
  PetscViewer       viewer = vf->viewer;
  PetscViewerFormat format = vf->format;
  Vec               r;
  PetscReal         truenorm, bnorm;
  char              normtype[256];
  PetscInt          tablevel;
  const char       *prefix;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(viewer, PETSC_VIEWER_CLASSID, 4);
  PetscCall(PetscObjectGetTabLevel((PetscObject)ksp, &tablevel));
  PetscCall(PetscObjectGetOptionsPrefix((PetscObject)ksp, &prefix));
  PetscCall(PetscStrncpy(normtype, KSPNormTypes[ksp->normtype], sizeof(normtype)));
  PetscCall(PetscStrtolower(normtype));
  PetscCall(KSPBuildResidual(ksp, NULL, NULL, &r));
  PetscCall(VecNorm(r, NORM_2, &truenorm));
  PetscCall(VecNorm(ksp->vec_rhs, NORM_2, &bnorm));
  PetscCall(VecDestroy(&r));

  PetscCall(PetscViewerPushFormat(viewer, format));
  PetscCall(PetscViewerASCIIAddTab(viewer, tablevel));
  if (n == 0 && prefix) PetscCall(PetscViewerASCIIPrintf(viewer, "  Residual norms for %s solve.\n", prefix));
  if (bnorm == 0) {
    PetscCall(PetscViewerASCIIPrintf(viewer, "%3" PetscInt_FMT " KSP %s resid norm %14.12e true resid norm %14.12e ||r(i)||/||b|| inf\n", n, normtype, (double)rnorm, (double)truenorm));
  } else {
    PetscCall(PetscViewerASCIIPrintf(viewer, "%3" PetscInt_FMT " KSP %s resid norm %14.12e true resid norm %14.12e ||r(i)||/||b|| %14.12e\n", n, normtype, (double)rnorm, (double)truenorm, (double)(truenorm / bnorm)));
  }
  PetscCall(PetscViewerASCIISubtractTab(viewer, tablevel));
  PetscCall(PetscViewerPopFormat(viewer));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  KSPMonitorTrueResidualView - Plots the true residual at each iteration of an iterative solver.

  Collective

  Input Parameters:
+ ksp   - iterative context
. n     - iteration number
. rnorm - 2-norm (preconditioned) residual value (may be estimated).
- vf    - The viewer context of type `PETSCVIEWERDRAW`

  Options Database Key:
. -ksp_monitor_true_residual viewertype - Activates `KSPMonitorTrueResidualView()`

  Level: intermediate

  Note:
  This is not called directly by users, rather one calls `KSPMonitorSet()`, with this function as an argument, to cause the monitor
  to be used during the `KSP` solve.

.seealso: [](ch_ksp), `PETSCVIEWERDRAW`, `KSP`, `KSPMonitorSet()`, `KSPMonitorTrueResidual()`, `KSPMonitorResidual()`,
          `KSPMonitorTrueResidualDrawLG()`, `PetscViewerAndFormat`
@*/
PetscErrorCode KSPMonitorTrueResidualView(KSP ksp, PetscInt n, PetscReal rnorm, PetscViewerAndFormat *vf)
{
  PetscViewer       viewer = vf->viewer;
  PetscViewerFormat format = vf->format;
  Vec               r;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(viewer, PETSC_VIEWER_CLASSID, 4);
  PetscCall(PetscViewerPushFormat(viewer, format));
  PetscCall(KSPBuildResidual(ksp, NULL, NULL, &r));
  PetscCall(PetscObjectSetName((PetscObject)r, "True Residual"));
  PetscCall(PetscObjectCompose((PetscObject)r, "__Vec_bc_zero__", (PetscObject)ksp));
  PetscCall(VecView(r, viewer));
  PetscCall(PetscObjectCompose((PetscObject)r, "__Vec_bc_zero__", NULL));
  PetscCall(VecDestroy(&r));
  PetscCall(PetscViewerPopFormat(viewer));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  KSPMonitorTrueResidualDrawLG - Plots the true residual norm at each iteration of an iterative solver.

  Collective

  Input Parameters:
+ ksp   - iterative context
. n     - iteration number
. rnorm - 2-norm (preconditioned) residual value (may be estimated).
- vf    - The viewer context

  Options Database Key:
. -ksp_monitor_true_residual draw::draw_lg - Activates `KSPMonitorTrueResidualDrawLG()`

  Level: intermediate

  Notes:
  This is not called directly by users, rather one calls `KSPMonitorSet()`, with this function as an argument, to cause the monitor
  to be used during the `KSP` solve.

  Call `KSPMonitorTrueResidualDrawLGCreate()` to create the context needed for this monitor

.seealso: [](ch_ksp), `PETSCVIEWERDRAW`, `KSP`, `KSPMonitorSet()`, `KSPMonitorTrueResidual()`, `KSPMonitorTrueResidualDraw()`, `KSPMonitorResidual`,
          `KSPMonitorTrueResidualDrawLGCreate()`
@*/
PetscErrorCode KSPMonitorTrueResidualDrawLG(KSP ksp, PetscInt n, PetscReal rnorm, PetscViewerAndFormat *vf)
{
  PetscViewer        viewer = vf->viewer;
  PetscViewerFormat  format = vf->format;
  Vec                r;
  KSPConvergedReason reason;
  PetscReal          truenorm, x[2], y[2];
  PetscDrawLG        lg;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(viewer, PETSC_VIEWER_CLASSID, 4);
  PetscCall(KSPBuildResidual(ksp, NULL, NULL, &r));
  PetscCall(VecNorm(r, NORM_2, &truenorm));
  PetscCall(VecDestroy(&r));
  PetscCall(PetscViewerPushFormat(viewer, format));
  PetscCall(PetscViewerDrawGetDrawLG(viewer, 0, &lg));
  if (!n) PetscCall(PetscDrawLGReset(lg));
  x[0] = (PetscReal)n;
  if (rnorm > 0.0) y[0] = PetscLog10Real(rnorm);
  else y[0] = -15.0;
  x[1] = (PetscReal)n;
  if (truenorm > 0.0) y[1] = PetscLog10Real(truenorm);
  else y[1] = -15.0;
  PetscCall(PetscDrawLGAddPoint(lg, x, y));
  PetscCall(KSPGetConvergedReason(ksp, &reason));
  if (n <= 20 || !(n % 5) || reason) {
    PetscCall(PetscDrawLGDraw(lg));
    PetscCall(PetscDrawLGSave(lg));
  }
  PetscCall(PetscViewerPopFormat(viewer));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  KSPMonitorTrueResidualDrawLGCreate - Creates the context for the true residual monitor `KSPMonitorTrueResidualDrawLG()`

  Collective

  Input Parameters:
+ viewer - The `PetscViewer` of type `PETSCVIEWERDRAW`
. format - The viewer format
- ctx    - An optional user context

  Output Parameter:
. vf - The viewer context

  Level: intermediate

.seealso: [](ch_ksp), `PETSCVIEWERDRAW`, `KSP`, `KSPMonitorSet()`, `KSPMonitorTrueResidual()`, `PetscViewerAndFormat`
@*/
PetscErrorCode KSPMonitorTrueResidualDrawLGCreate(PetscViewer viewer, PetscViewerFormat format, PetscCtx ctx, PetscViewerAndFormat **vf)
{
  const char *names[] = {"preconditioned", "true"};

  PetscFunctionBegin;
  PetscCall(PetscViewerAndFormatCreate(viewer, format, vf));
  (*vf)->data = ctx;
  PetscCall(PetscViewerMonitorLGSetUp(viewer, NULL, NULL, "Log Residual Norm", 2, names, PETSC_DECIDE, PETSC_DECIDE, 400, 300));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  KSPMonitorTrueResidualMax - Prints the true residual max norm at each iteration of an iterative solver.

  Collective

  Input Parameters:
+ ksp   - iterative context
. n     - iteration number
. rnorm - 2-norm (preconditioned) residual value (may be estimated).
- vf    - The viewer context

  Options Database Key:
. -ksp_monitor_true_residual_max - Activates `KSPMonitorTrueResidualMax()`

  Level: intermediate

  Note:
  This is not called directly by users, rather one calls `KSPMonitorSet()`, with this function as an argument, to cause the monitor
  to be used during the `KSP` solve.

.seealso: [](ch_ksp), `KSP`, `KSPMonitorSet()`, `KSPMonitorResidual()`, `KSPMonitorTrueResidualMaxNorm()`
@*/
PetscErrorCode KSPMonitorTrueResidualMax(KSP ksp, PetscInt n, PetscReal rnorm, PetscViewerAndFormat *vf)
{
  PetscViewer       viewer = vf->viewer;
  PetscViewerFormat format = vf->format;
  Vec               r;
  PetscReal         truenorm, bnorm;
  char              normtype[256];
  PetscInt          tablevel;
  const char       *prefix;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(viewer, PETSC_VIEWER_CLASSID, 4);
  PetscCall(PetscObjectGetTabLevel((PetscObject)ksp, &tablevel));
  PetscCall(PetscObjectGetOptionsPrefix((PetscObject)ksp, &prefix));
  PetscCall(PetscStrncpy(normtype, KSPNormTypes[ksp->normtype], sizeof(normtype)));
  PetscCall(PetscStrtolower(normtype));
  PetscCall(KSPBuildResidual(ksp, NULL, NULL, &r));
  PetscCall(VecNorm(r, NORM_INFINITY, &truenorm));
  PetscCall(VecNorm(ksp->vec_rhs, NORM_INFINITY, &bnorm));
  PetscCall(VecDestroy(&r));

  PetscCall(PetscViewerPushFormat(viewer, format));
  PetscCall(PetscViewerASCIIAddTab(viewer, tablevel));
  if (n == 0 && prefix) PetscCall(PetscViewerASCIIPrintf(viewer, "  Residual norms for %s solve.\n", prefix));
  PetscCall(PetscViewerASCIIPrintf(viewer, "%3" PetscInt_FMT " KSP %s true resid max norm %14.12e ||r(i)||/||b|| %14.12e\n", n, normtype, (double)truenorm, (double)(truenorm / bnorm)));
  PetscCall(PetscViewerASCIISubtractTab(viewer, tablevel));
  PetscCall(PetscViewerPopFormat(viewer));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  KSPMonitorError - Prints the error norm, as well as the (possibly preconditioned) residual norm, at each iteration of an iterative solver.

  Collective

  Input Parameters:
+ ksp   - iterative context
. n     - iteration number
. rnorm - 2-norm (preconditioned) residual value (may be estimated).
- vf    - The viewer context

  Options Database Key:
. -ksp_monitor_error - Activates `KSPMonitorError()`

  Level: intermediate

  Note:
  This is not called directly by users, rather one calls `KSPMonitorSet()`, with this function as an argument, to cause the monitor
  to be used during the `KSP` solve.

.seealso: [](ch_ksp), `KSP`, `KSPMonitorSet()`, `KSPMonitorResidual()`, `KSPMonitorTrueResidualMaxNorm()`
@*/
PetscErrorCode KSPMonitorError(KSP ksp, PetscInt n, PetscReal rnorm, PetscViewerAndFormat *vf)
{
  PetscViewer       viewer = vf->viewer;
  PetscViewerFormat format = vf->format;
  DM                dm;
  Vec               sol;
  PetscReal        *errors;
  PetscInt          Nf, f;
  PetscInt          tablevel;
  const char       *prefix;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(viewer, PETSC_VIEWER_CLASSID, 4);
  PetscCall(PetscObjectGetTabLevel((PetscObject)ksp, &tablevel));
  PetscCall(PetscObjectGetOptionsPrefix((PetscObject)ksp, &prefix));
  PetscCall(KSPGetDM(ksp, &dm));
  PetscCall(DMGetNumFields(dm, &Nf));
  PetscCall(DMGetGlobalVector(dm, &sol));
  PetscCall(KSPBuildSolution(ksp, sol, NULL));
  /* TODO: Make a different monitor that flips sign for SNES, Newton system is A dx = -b, so we need to negate the solution */
  PetscCall(VecScale(sol, -1.0));
  PetscCall(PetscCalloc1(Nf, &errors));
  PetscCall(DMComputeError(dm, sol, errors, NULL));

  PetscCall(PetscViewerPushFormat(viewer, format));
  PetscCall(PetscViewerASCIIAddTab(viewer, tablevel));
  if (n == 0 && prefix) PetscCall(PetscViewerASCIIPrintf(viewer, "  Error norms for %s solve.\n", prefix));
  PetscCall(PetscViewerASCIIPrintf(viewer, "%3" PetscInt_FMT " KSP Error norm %s", n, Nf > 1 ? "[" : ""));
  PetscCall(PetscViewerASCIIUseTabs(viewer, PETSC_FALSE));
  for (f = 0; f < Nf; ++f) {
    if (f > 0) PetscCall(PetscViewerASCIIPrintf(viewer, ", "));
    PetscCall(PetscViewerASCIIPrintf(viewer, "%14.12e", (double)errors[f]));
  }
  PetscCall(PetscViewerASCIIPrintf(viewer, "%s resid norm %14.12e\n", Nf > 1 ? "]" : "", (double)rnorm));
  PetscCall(PetscViewerASCIIUseTabs(viewer, PETSC_TRUE));
  PetscCall(PetscViewerASCIISubtractTab(viewer, tablevel));
  PetscCall(PetscViewerPopFormat(viewer));
  PetscCall(DMRestoreGlobalVector(dm, &sol));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  KSPMonitorErrorDraw - Plots the error at each iteration of an iterative solver.

  Collective

  Input Parameters:
+ ksp   - iterative context
. n     - iteration number
. rnorm - 2-norm (preconditioned) residual value (may be estimated).
- vf    - The viewer context

  Options Database Key:
. -ksp_monitor_error draw - Activates `KSPMonitorErrorDraw()`

  Level: intermediate

  Note:
  This is not called directly by users, rather one calls `KSPMonitorSet()`, with this function as an argument, to cause the monitor
  to be used during the `KSP` solve.

.seealso: [](ch_ksp), `PETSCVIEWERDRAW`, `KSP`, `KSPMonitorSet()`, `KSPMonitorTrueResidual()`, `KSPMonitorErrorDrawLG()`
@*/
PetscErrorCode KSPMonitorErrorDraw(KSP ksp, PetscInt n, PetscReal rnorm, PetscViewerAndFormat *vf)
{
  PetscViewer       viewer = vf->viewer;
  PetscViewerFormat format = vf->format;
  DM                dm;
  Vec               sol, e;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(viewer, PETSC_VIEWER_CLASSID, 4);
  PetscCall(PetscViewerPushFormat(viewer, format));
  PetscCall(KSPGetDM(ksp, &dm));
  PetscCall(DMGetGlobalVector(dm, &sol));
  PetscCall(KSPBuildSolution(ksp, sol, NULL));
  PetscCall(DMComputeError(dm, sol, NULL, &e));
  PetscCall(PetscObjectSetName((PetscObject)e, "Error"));
  PetscCall(PetscObjectCompose((PetscObject)e, "__Vec_bc_zero__", (PetscObject)ksp));
  PetscCall(VecView(e, viewer));
  PetscCall(PetscObjectCompose((PetscObject)e, "__Vec_bc_zero__", NULL));
  PetscCall(VecDestroy(&e));
  PetscCall(DMRestoreGlobalVector(dm, &sol));
  PetscCall(PetscViewerPopFormat(viewer));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  KSPMonitorErrorDrawLG - Plots the error and residual norm at each iteration of an iterative solver.

  Collective

  Input Parameters:
+ ksp   - iterative context
. n     - iteration number
. rnorm - 2-norm (preconditioned) residual value (may be estimated).
- vf    - The viewer context

  Options Database Key:
. -ksp_monitor_error draw::draw_lg - Activates `KSPMonitorTrueResidualDrawLG()`

  Level: intermediate

  Notes:
  This is not called directly by users, rather one calls `KSPMonitorSet()`, with this function as an argument, to cause the monitor
  to be used during the `KSP` solve.

  Call `KSPMonitorErrorDrawLGCreate()` to create the context used with this monitor

.seealso: [](ch_ksp), `PETSCVIEWERDRAW`, `KSP`, `KSPMonitorSet()`, `KSPMonitorTrueResidual()`, `KSPMonitorErrorDraw()`
@*/
PetscErrorCode KSPMonitorErrorDrawLG(KSP ksp, PetscInt n, PetscReal rnorm, PetscViewerAndFormat *vf)
{
  PetscViewer        viewer = vf->viewer;
  PetscViewerFormat  format = vf->format;
  PetscDrawLG        lg;
  DM                 dm;
  Vec                sol;
  KSPConvergedReason reason;
  PetscReal         *x, *errors;
  PetscInt           Nf, f;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(viewer, PETSC_VIEWER_CLASSID, 4);
  PetscCall(PetscViewerDrawGetDrawLG(viewer, 0, &lg));
  PetscCall(KSPGetDM(ksp, &dm));
  PetscCall(DMGetNumFields(dm, &Nf));
  PetscCall(DMGetGlobalVector(dm, &sol));
  PetscCall(KSPBuildSolution(ksp, sol, NULL));
  /* TODO: Make a different monitor that flips sign for SNES, Newton system is A dx = -b, so we need to negate the solution */
  PetscCall(VecScale(sol, -1.0));
  PetscCall(PetscCalloc2(Nf + 1, &x, Nf + 1, &errors));
  PetscCall(DMComputeError(dm, sol, errors, NULL));

  PetscCall(PetscViewerPushFormat(viewer, format));
  if (!n) PetscCall(PetscDrawLGReset(lg));
  for (f = 0; f < Nf; ++f) {
    x[f]      = (PetscReal)n;
    errors[f] = errors[f] > 0.0 ? PetscLog10Real(errors[f]) : -15.;
  }
  x[Nf]      = (PetscReal)n;
  errors[Nf] = rnorm > 0.0 ? PetscLog10Real(rnorm) : -15.;
  PetscCall(PetscDrawLGAddPoint(lg, x, errors));
  PetscCall(KSPGetConvergedReason(ksp, &reason));
  if (n <= 20 || !(n % 5) || reason) {
    PetscCall(PetscDrawLGDraw(lg));
    PetscCall(PetscDrawLGSave(lg));
  }
  PetscCall(PetscViewerPopFormat(viewer));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  KSPMonitorErrorDrawLGCreate - Creates the context for the error and preconditioned residual plotter `KSPMonitorErrorDrawLG()`

  Collective

  Input Parameters:
+ viewer - The `PetscViewer`
. format - The viewer format
- ctx    - An optional user context

  Output Parameter:
. vf - The viewer context

  Level: intermediate

.seealso: [](ch_ksp), `PETSCVIEWERDRAW`, `KSP`, `KSPMonitorSet()`, `KSPMonitorTrueResidual()`, `KSPMonitorErrorDrawLG()`
@*/
PetscErrorCode KSPMonitorErrorDrawLGCreate(PetscViewer viewer, PetscViewerFormat format, PetscCtx ctx, PetscViewerAndFormat **vf)
{
  KSP      ksp = (KSP)ctx;
  DM       dm;
  char   **names;
  PetscInt Nf, f;

  PetscFunctionBegin;
  PetscCall(KSPGetDM(ksp, &dm));
  PetscCall(DMGetNumFields(dm, &Nf));
  PetscCall(PetscMalloc1(Nf + 1, &names));
  for (f = 0; f < Nf; ++f) {
    PetscObject disc;
    const char *fname;
    char        lname[PETSC_MAX_PATH_LEN];

    PetscCall(DMGetField(dm, f, NULL, &disc));
    PetscCall(PetscObjectGetName(disc, &fname));
    PetscCall(PetscStrncpy(lname, fname, PETSC_MAX_PATH_LEN));
    PetscCall(PetscStrlcat(lname, " Error", PETSC_MAX_PATH_LEN));
    PetscCall(PetscStrallocpy(lname, &names[f]));
  }
  PetscCall(PetscStrallocpy("residual", &names[Nf]));
  PetscCall(PetscViewerAndFormatCreate(viewer, format, vf));
  (*vf)->data = ctx;
  PetscCall(PetscViewerMonitorLGSetUp(viewer, NULL, NULL, "Log Error Norm", Nf + 1, (const char **)names, PETSC_DECIDE, PETSC_DECIDE, 400, 300));
  for (f = 0; f <= Nf; ++f) PetscCall(PetscFree(names[f]));
  PetscCall(PetscFree(names));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  KSPMonitorSolution - Print the solution norm at each iteration of an iterative solver.

  Collective

  Input Parameters:
+ ksp   - iterative context
. n     - iteration number
. rnorm - 2-norm (preconditioned) residual value (may be estimated).
- vf    - The viewer context

  Options Database Key:
. -ksp_monitor_solution - Activates `KSPMonitorSolution()`

  Level: intermediate

  Note:
  This is not called directly by users, rather one calls `KSPMonitorSet()`, with this function as an argument, to cause the monitor
  to be used during the `KSP` solve.

.seealso: [](ch_ksp), `KSPMonitorSet()`, `KSPMonitorTrueResidual()`
@*/
PetscErrorCode KSPMonitorSolution(KSP ksp, PetscInt n, PetscReal rnorm, PetscViewerAndFormat *vf)
{
  PetscViewer       viewer = vf->viewer;
  PetscViewerFormat format = vf->format;
  Vec               x;
  PetscReal         snorm;
  PetscInt          tablevel;
  const char       *prefix;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(viewer, PETSC_VIEWER_CLASSID, 4);
  PetscCall(KSPBuildSolution(ksp, NULL, &x));
  PetscCall(VecNorm(x, NORM_2, &snorm));
  PetscCall(PetscObjectGetTabLevel((PetscObject)ksp, &tablevel));
  PetscCall(PetscObjectGetOptionsPrefix((PetscObject)ksp, &prefix));
  PetscCall(PetscViewerPushFormat(viewer, format));
  PetscCall(PetscViewerASCIIAddTab(viewer, tablevel));
  if (n == 0 && prefix) PetscCall(PetscViewerASCIIPrintf(viewer, "  Solution norms for %s solve.\n", prefix));
  PetscCall(PetscViewerASCIIPrintf(viewer, "%3" PetscInt_FMT " KSP Solution norm %14.12e\n", n, (double)snorm));
  PetscCall(PetscViewerASCIISubtractTab(viewer, tablevel));
  PetscCall(PetscViewerPopFormat(viewer));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  KSPMonitorSolutionDraw - Plots the solution at each iteration of an iterative solver.

  Collective

  Input Parameters:
+ ksp   - iterative context
. n     - iteration number
. rnorm - 2-norm (preconditioned) residual value (may be estimated).
- vf    - The viewer context

  Options Database Key:
. -ksp_monitor_solution draw - Activates `KSPMonitorSolutionDraw()`

  Level: intermediate

  Note:
  This is not called directly by users, rather one calls `KSPMonitorSet()`, with this function as an argument, to cause the monitor
  to be used during the `KSP` solve.

.seealso: [](ch_ksp), `KSPMonitorSet()`, `KSPMonitorTrueResidual()`
@*/
PetscErrorCode KSPMonitorSolutionDraw(KSP ksp, PetscInt n, PetscReal rnorm, PetscViewerAndFormat *vf)
{
  PetscViewer       viewer = vf->viewer;
  PetscViewerFormat format = vf->format;
  Vec               x;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(viewer, PETSC_VIEWER_CLASSID, 4);
  PetscCall(KSPBuildSolution(ksp, NULL, &x));
  PetscCall(PetscViewerPushFormat(viewer, format));
  PetscCall(PetscObjectSetName((PetscObject)x, "Solution"));
  PetscCall(PetscObjectCompose((PetscObject)x, "__Vec_bc_zero__", (PetscObject)ksp));
  PetscCall(VecView(x, viewer));
  PetscCall(PetscObjectCompose((PetscObject)x, "__Vec_bc_zero__", NULL));
  PetscCall(PetscViewerPopFormat(viewer));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  KSPMonitorSolutionDrawLG - Plots the solution norm at each iteration of an iterative solver.

  Collective

  Input Parameters:
+ ksp   - iterative context
. n     - iteration number
. rnorm - 2-norm (preconditioned) residual value (may be estimated).
- vf    - The viewer context

  Options Database Key:
. -ksp_monitor_solution draw::draw_lg - Activates `KSPMonitorSolutionDrawLG()`

  Level: intermediate

  Notes:
  This is not called directly by users, rather one calls `KSPMonitorSet()`, with this function as an argument, to cause the monitor
  to be used during the `KSP` solve.

  Call `KSPMonitorSolutionDrawLGCreate()` to create the context needed with this monitor

.seealso: [](ch_ksp), `KSP`, `KSPMonitorSet()`, `KSPMonitorTrueResidual()`, `KSPMonitorSolutionDrawLGCreate()`
@*/
PetscErrorCode KSPMonitorSolutionDrawLG(KSP ksp, PetscInt n, PetscReal rnorm, PetscViewerAndFormat *vf)
{
  PetscViewer        viewer = vf->viewer;
  PetscViewerFormat  format = vf->format;
  PetscDrawLG        lg;
  Vec                u;
  KSPConvergedReason reason;
  PetscReal          snorm, x, y;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(viewer, PETSC_VIEWER_CLASSID, 4);
  PetscCall(PetscViewerDrawGetDrawLG(viewer, 0, &lg));
  PetscCall(KSPBuildSolution(ksp, NULL, &u));
  PetscCall(VecNorm(u, NORM_2, &snorm));
  PetscCall(PetscViewerPushFormat(viewer, format));
  if (!n) PetscCall(PetscDrawLGReset(lg));
  x = (PetscReal)n;
  if (snorm > 0.0) y = PetscLog10Real(snorm);
  else y = -15.0;
  PetscCall(PetscDrawLGAddPoint(lg, &x, &y));
  PetscCall(KSPGetConvergedReason(ksp, &reason));
  if (n <= 20 || !(n % 5) || reason) {
    PetscCall(PetscDrawLGDraw(lg));
    PetscCall(PetscDrawLGSave(lg));
  }
  PetscCall(PetscViewerPopFormat(viewer));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  KSPMonitorSolutionDrawLGCreate - Creates the context for the `KSP` monitor `KSPMonitorSolutionDrawLG()`

  Collective

  Input Parameters:
+ viewer - The `PetscViewer`
. format - The viewer format
- ctx    - An optional user context

  Output Parameter:
. vf - The viewer context

  Level: intermediate

  Note:
  This is not called directly by users, rather one calls `KSPMonitorSet()`, with this function as an argument, to cause the monitor
  to be used during the `KSP` solve.

.seealso: [](ch_ksp), `KSPMonitorSet()`, `KSPMonitorTrueResidual()`
@*/
PetscErrorCode KSPMonitorSolutionDrawLGCreate(PetscViewer viewer, PetscViewerFormat format, PetscCtx ctx, PetscViewerAndFormat **vf)
{
  PetscFunctionBegin;
  PetscCall(PetscViewerAndFormatCreate(viewer, format, vf));
  (*vf)->data = ctx;
  PetscCall(PetscViewerMonitorLGSetUp(viewer, NULL, NULL, "Log Solution Norm", 1, NULL, PETSC_DECIDE, PETSC_DECIDE, 400, 300));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  KSPMonitorSingularValue - Prints the two norm of the true residual and estimation of the extreme singular values of the preconditioned problem at each iteration.

  Logically Collective

  Input Parameters:
+ ksp   - the iterative context
. n     - the iteration
. rnorm - the two norm of the residual
- vf    - The viewer context

  Options Database Key:
. -ksp_monitor_singular_value - Activates `KSPMonitorSingularValue()`

  Level: intermediate

  Notes:
  The `KSPCG` solver uses the Lanczos technique for eigenvalue computation,
  while `KSPGMRES` uses the Arnoldi technique; other iterative methods do
  not currently compute singular values.

  This is not called directly by users, rather one calls `KSPMonitorSet()`, with this function as an argument, to cause the monitor
  to be used during the `KSP` solve.

  Call `KSPMonitorSingularValueCreate()` to create the context needed by this monitor

.seealso: [](ch_ksp), `KSP`, `KSPMonitorSet()`, `KSPComputeExtremeSingularValues()`, `KSPMonitorSingularValueCreate()`
@*/
PetscErrorCode KSPMonitorSingularValue(KSP ksp, PetscInt n, PetscReal rnorm, PetscViewerAndFormat *vf)
{
  PetscViewer       viewer = vf->viewer;
  PetscViewerFormat format = vf->format;
  PetscReal         emin, emax;
  PetscInt          tablevel;
  const char       *prefix;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(ksp, KSP_CLASSID, 1);
  PetscValidHeaderSpecific(viewer, PETSC_VIEWER_CLASSID, 4);
  PetscCall(PetscObjectGetTabLevel((PetscObject)ksp, &tablevel));
  PetscCall(PetscObjectGetOptionsPrefix((PetscObject)ksp, &prefix));
  PetscCall(PetscViewerPushFormat(viewer, format));
  PetscCall(PetscViewerASCIIAddTab(viewer, tablevel));
  if (n == 0 && prefix) PetscCall(PetscViewerASCIIPrintf(viewer, "  Residual norms for %s solve.\n", prefix));
  if (!ksp->calc_sings) {
    PetscCall(PetscViewerASCIIPrintf(viewer, "%3" PetscInt_FMT " KSP Residual norm %14.12e\n", n, (double)rnorm));
  } else {
    PetscCall(KSPComputeExtremeSingularValues(ksp, &emax, &emin));
    PetscCall(PetscViewerASCIIPrintf(viewer, "%3" PetscInt_FMT " KSP Residual norm %14.12e %% max %14.12e min %14.12e max/min %14.12e\n", n, (double)rnorm, (double)emax, (double)emin, (double)(emax / emin)));
  }
  PetscCall(PetscViewerASCIISubtractTab(viewer, tablevel));
  PetscCall(PetscViewerPopFormat(viewer));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  KSPMonitorSingularValueCreate - Creates the singular value monitor context needed by `KSPMonitorSingularValue()`

  Collective

  Input Parameters:
+ viewer - The PetscViewer
. format - The viewer format
- ctx    - An optional user context

  Output Parameter:
. vf - The viewer context

  Level: intermediate

.seealso: [](ch_ksp), `KSP`, `KSPMonitorSet()`, `KSPMonitorSingularValue()`, `PetscViewer`
@*/
PetscErrorCode KSPMonitorSingularValueCreate(PetscViewer viewer, PetscViewerFormat format, PetscCtx ctx, PetscViewerAndFormat **vf)
{
  KSP ksp = (KSP)ctx;

  PetscFunctionBegin;
  PetscCall(PetscViewerAndFormatCreate(viewer, format, vf));
  (*vf)->data = ctx;
  PetscCall(KSPSetComputeSingularValues(ksp, PETSC_TRUE));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  KSPMonitorDynamicToleranceCreate - Creates the context used by `KSPMonitorDynamicTolerance()`

  Logically Collective

  Output Parameter:
. ctx - a void pointer

  Options Database Key:
. -sub_ksp_dynamic_tolerance <coef> - coefficient of dynamic tolerance for inner solver, default is 1.0

  Level: advanced

  Note:
  Use before calling `KSPMonitorSet()` with `KSPMonitorDynamicTolerance()`

  The default coefficient for the tolerance can be changed with `KSPMonitorDynamicToleranceSetCoefficient()`

.seealso: [](sec_flexibleksp), `KSP`, `KSPMonitorDynamicTolerance()`, `KSPMonitorDynamicToleranceDestroy()`, `KSPMonitorDynamicToleranceSetCoefficient()`
@*/
PetscErrorCode KSPMonitorDynamicToleranceCreate(PetscCtx ctx)
{
  KSPDynTolCtx *scale;

  PetscFunctionBegin;
  PetscCall(PetscMalloc1(1, &scale));
  scale->bnrm   = -1.0;
  scale->coef   = 1.0;
  *(void **)ctx = scale;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  KSPMonitorDynamicToleranceSetCoefficient - Sets the coefficient in the context used by `KSPMonitorDynamicTolerance()`

  Logically Collective

  Output Parameters:
+ ctx   - the context for `KSPMonitorDynamicTolerance()`
- coeff - the coefficient, default is 1.0

  Options Database Key:
. -sub_ksp_dynamic_tolerance <coef> - coefficient of dynamic tolerance for inner solver, default is 1.0

  Level: advanced

  Note:
  Use before calling `KSPMonitorSet()` and after `KSPMonitorDynamicToleranceCreate()`

.seealso: [](sec_flexibleksp), `KSP`, `KSPMonitorDynamicTolerance()`, `KSPMonitorDynamicToleranceDestroy()`, `KSPMonitorDynamicToleranceCreate()`
@*/
PetscErrorCode KSPMonitorDynamicToleranceSetCoefficient(PetscCtx ctx, PetscReal coeff)
{
  KSPDynTolCtx *scale = (KSPDynTolCtx *)ctx;

  PetscFunctionBegin;
  scale->coef = coeff;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  KSPMonitorDynamicTolerance - A monitor that changes the inner tolerance of nested preconditioners in every outer iteration in an adaptive way.

  Collective

  Input Parameters:
+ ksp   - iterative context
. its   - iteration number (not used)
. fnorm - the current residual norm
- ctx   - context used by monitor

  Options Database Key:
. -sub_ksp_dynamic_tolerance <coef> - coefficient of dynamic tolerance for inner solver, default is 1.0

  Level: advanced

  Notes:
  Applies for `PCKSP`, `PCBJACOBI`, and `PCDEFLATION` preconditioners

  This may be useful for a flexible preconditioned Krylov method, such as `KSPFGMRES`, [](sec_flexibleksp) to
  control the accuracy of the inner solves needed to guarantee convergence of the outer iterations.

  This is not called directly by users, rather one calls `KSPMonitorSet()`, with this function as an argument, to cause the monitor
  to be used during the `KSP` solve.

  Use `KSPMonitorDynamicToleranceCreate()` and `KSPMonitorDynamicToleranceSetCoefficient()` to create the context needed by this
  monitor function.

  Pass the context and `KSPMonitorDynamicToleranceDestroy()` to `KSPMonitorSet()`

.seealso: [](sec_flexibleksp), `KSP`, `KSPMonitorDynamicToleranceCreate()`, `KSPMonitorDynamicToleranceDestroy()`, `KSPMonitorDynamicToleranceSetCoefficient()`
@*/
PetscErrorCode KSPMonitorDynamicTolerance(KSP ksp, PetscInt its, PetscReal fnorm, PetscCtx ctx)
{
  PC            pc;
  PetscReal     outer_rtol, outer_abstol, outer_dtol, inner_rtol;
  PetscInt      outer_maxits, nksp, first, i;
  KSPDynTolCtx *scale  = (KSPDynTolCtx *)ctx;
  KSP          *subksp = NULL;
  KSP           kspinner;
  PetscBool     flg;

  PetscFunctionBegin;
  PetscCall(KSPGetPC(ksp, &pc));

  /* compute inner_rtol */
  if (scale->bnrm < 0.0) {
    Vec b;
    PetscCall(KSPGetRhs(ksp, &b));
    PetscCall(VecNorm(b, NORM_2, &scale->bnrm));
  }
  PetscCall(KSPGetTolerances(ksp, &outer_rtol, &outer_abstol, &outer_dtol, &outer_maxits));
  inner_rtol = PetscMin(scale->coef * scale->bnrm * outer_rtol / fnorm, 0.999);

  /* if pc is ksp */
  PetscCall(PetscObjectTypeCompare((PetscObject)pc, PCKSP, &flg));
  if (flg) {
    PetscCall(PCKSPGetKSP(pc, &kspinner));
    PetscCall(KSPSetTolerances(kspinner, inner_rtol, outer_abstol, outer_dtol, outer_maxits));
    PetscFunctionReturn(PETSC_SUCCESS);
  }

  /* if pc is bjacobi */
  PetscCall(PetscObjectTypeCompare((PetscObject)pc, PCBJACOBI, &flg));
  if (flg) {
    PetscCall(PCBJacobiGetSubKSP(pc, &nksp, &first, &subksp));
    if (subksp) {
      for (i = 0; i < nksp; i++) PetscCall(KSPSetTolerances(subksp[i], inner_rtol, outer_abstol, outer_dtol, outer_maxits));
      PetscFunctionReturn(PETSC_SUCCESS);
    }
  }

  /* if pc is deflation*/
  PetscCall(PetscObjectTypeCompare((PetscObject)pc, PCDEFLATION, &flg));
  if (flg) {
    PetscCall(PCDeflationGetCoarseKSP(pc, &kspinner));
    PetscCall(KSPSetTolerances(kspinner, inner_rtol, outer_abstol, outer_dtol, PETSC_CURRENT));
    PetscFunctionReturn(PETSC_SUCCESS);
  }

  /* TODO: dynamic tolerance may apply to other types of pc */
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  KSPMonitorDynamicToleranceDestroy - Destroy the monitor context used in `KSPMonitorDynamicTolerance()`

  Input Parameter:
. ctx - the monitor context

  Level: advanced

  Note:
  This is not called directly but is passed to `KSPMonitorSet()` along with `KSPMonitorDynamicTolerance()`

.seealso: [](ch_ksp), `KSP`, `KSPMonitorDynamicTolerance()`, `KSPMonitorSet()`, `KSPMonitorDynamicToleranceCreate()`
@*/
PetscErrorCode KSPMonitorDynamicToleranceDestroy(PetscCtxRt ctx)
{
  PetscFunctionBegin;
  PetscCall(PetscFree(*(void **)ctx));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  KSPConvergedSkip - Convergence test that do not return as converged
  until the maximum number of iterations is reached.

  Collective

  Input Parameters:
+ ksp   - iterative context
. n     - iteration number
. rnorm - 2-norm residual value (may be estimated)
- dtx   - unused convergence context

  Output Parameter:
. reason - `KSP_CONVERGED_ITERATING` or `KSP_CONVERGED_ITS`

  Options Database Key:
. -ksp_convergence_test skip - skips the test

  Level: advanced

  Note:
  This should be used as the convergence test with the option
  `KSPSetNormType`(ksp,`KSP_NORM_NONE`), since norms of the residual are
  not computed. Convergence is then declared after the maximum number
  of iterations have been reached. Useful when one is using `KSPCG` or
  `KSPBCGS`. [](sec_flexibleksp)

.seealso: [](ch_ksp), `KSP`, `KSPCG`, `KSPBCGS`, `KSPConvergenceTestFn`, `KSPSetConvergenceTest()`, `KSPSetTolerances()`, `KSPSetNormType()`, [](sec_flexibleksp),
          `KSPConvergedReason`
@*/
PetscErrorCode KSPConvergedSkip(KSP ksp, PetscInt n, PetscReal rnorm, KSPConvergedReason *reason, PetscCtx dtx)
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(ksp, KSP_CLASSID, 1);
  PetscAssertPointer(reason, 4);
  *reason = KSP_CONVERGED_ITERATING;
  if (n >= ksp->max_it) *reason = KSP_CONVERGED_ITS;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@
  KSPSetConvergedNegativeCurvature - Allows to declare convergence and return `KSP_CONVERGED_NEG_CURVE` when negative curvature is detected

  Collective

  Input Parameters:
+ ksp - iterative context
- flg - the Boolean value

  Options Database Key:
. -ksp_converged_neg_curve <bool> - Declare convergence if negative curvature is detected

  Level: advanced

  Note:
  This is currently used only by a subset of the Krylov solvers, namely `KSPCG`, `KSPSTCG`, `KSPQCG`, `KSPGLTR`, `KSPNASH`, and `KSPMINRES`.

.seealso: [](ch_ksp), `KSP`, `KSPConvergedReason`, `KSPGetConvergedNegativeCurvature()`
@*/
PetscErrorCode KSPSetConvergedNegativeCurvature(KSP ksp, PetscBool flg)
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(ksp, KSP_CLASSID, 1);
  PetscValidLogicalCollectiveBool(ksp, flg, 2);
  ksp->converged_neg_curve = flg;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@
  KSPGetConvergedNegativeCurvature - Get the flag to declare convergence if negative curvature is detected

  Collective

  Input Parameter:
. ksp - iterative context

  Output Parameter:
. flg - the Boolean value

  Level: advanced

.seealso: [](ch_ksp), `KSP`, `KSPConvergedReason`, `KSPSetConvergedNegativeCurvature()`
@*/
PetscErrorCode KSPGetConvergedNegativeCurvature(KSP ksp, PetscBool *flg)
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(ksp, KSP_CLASSID, 1);
  PetscAssertPointer(flg, 2);
  *flg = ksp->converged_neg_curve;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  KSPConvergedDefaultCreate - Creates and initializes the context used by the `KSPConvergedDefault()` function

  Not Collective

  Output Parameter:
. ctx - convergence context

  Level: intermediate

.seealso: [](ch_ksp), `KSP`, `KSPConvergedDefault()`, `KSPConvergedDefaultDestroy()`, `KSPSetConvergenceTest()`, `KSPSetTolerances()`,
          `KSPConvergedSkip()`, `KSPConvergedReason`, `KSPGetConvergedReason()`, `KSPConvergedDefaultSetUIRNorm()`, `KSPConvergedDefaultSetUMIRNorm()`,
          `KSPConvergedDefaultSetConvergedMaxits()`
@*/
PetscErrorCode KSPConvergedDefaultCreate(void **ctx) PeNS
{
  KSPConvergedDefaultCtx *cctx;

  PetscFunctionBegin;
  PetscCall(PetscNew(&cctx));
  *ctx = cctx;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@
  KSPConvergedDefaultSetUIRNorm - makes the default convergence test use $ || B*(b - A*(initial guess))||$
  instead of $ || B*b ||$. In the case of right preconditioner or if `KSPSetNormType`(ksp,`KSP_NORM_UNPRECONDITIONED`)
  is used there is no B in the above formula.

  Collective

  Input Parameters:
. ksp - iterative context

  Options Database Key:
. -ksp_converged_use_initial_residual_norm <bool> - Use initial residual norm for computing relative convergence

  Level: intermediate

  Notes:
  UIRNorm is short for Use Initial Residual Norm.

  Use `KSPSetTolerances()` to alter the defaults for rtol, abstol, dtol.

  The precise values of reason are macros such as `KSP_CONVERGED_RTOL`, which
  are defined in petscksp.h.

  If the convergence test is not `KSPConvergedDefault()` then this is ignored.

  If right preconditioning is being used then B does not appear in the above formula.

.seealso: [](ch_ksp), `KSP`, `KSPSetConvergenceTest()`, `KSPSetTolerances()`, `KSPConvergedSkip()`, `KSPConvergedReason`, `KSPGetConvergedReason()`, `KSPConvergedDefaultSetUMIRNorm()`, `KSPConvergedDefaultSetConvergedMaxits()`
@*/
PetscErrorCode KSPConvergedDefaultSetUIRNorm(KSP ksp)
{
  KSPConvergedDefaultCtx *ctx = (KSPConvergedDefaultCtx *)ksp->cnvP;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(ksp, KSP_CLASSID, 1);
  if (ksp->converged != KSPConvergedDefault) PetscFunctionReturn(PETSC_SUCCESS);
  PetscCheck(!ctx->mininitialrtol, PetscObjectComm((PetscObject)ksp), PETSC_ERR_ARG_WRONGSTATE, "Cannot use KSPConvergedDefaultSetUIRNorm() and KSPConvergedDefaultSetUMIRNorm() together");
  ctx->initialrtol = PETSC_TRUE;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@
  KSPConvergedDefaultSetUMIRNorm - makes the default convergence test use min(|| B*(b - A*(initial guess))||,|| B*b ||)
  In the case of right preconditioner or if `KSPSetNormType`(ksp,`KSP_NORM_UNPRECONDITIONED`)
  is used there is no B in the above formula.

  Collective

  Input Parameters:
. ksp - iterative context

  Options Database Key:
. -ksp_converged_use_min_initial_residual_norm <bool> - Use minimum of initial residual norm and b for computing relative convergence

  Level: intermediate

  Notes:
  UMIRNorm is short for Use Minimum Initial Residual Norm.

  Use `KSPSetTolerances()` to alter the defaults for rtol, abstol, dtol.

.seealso: [](ch_ksp), `KSP`, `KSPSetConvergenceTest()`, `KSPSetTolerances()`, `KSPConvergedSkip()`, `KSPConvergedReason`, `KSPGetConvergedReason()`, `KSPConvergedDefaultSetUIRNorm()`, `KSPConvergedDefaultSetConvergedMaxits()`
@*/
PetscErrorCode KSPConvergedDefaultSetUMIRNorm(KSP ksp)
{
  KSPConvergedDefaultCtx *ctx = (KSPConvergedDefaultCtx *)ksp->cnvP;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(ksp, KSP_CLASSID, 1);
  if (ksp->converged != KSPConvergedDefault) PetscFunctionReturn(PETSC_SUCCESS);
  PetscCheck(!ctx->initialrtol, PetscObjectComm((PetscObject)ksp), PETSC_ERR_ARG_WRONGSTATE, "Cannot use KSPConvergedDefaultSetUIRNorm() and KSPConvergedDefaultSetUMIRNorm() together");
  ctx->mininitialrtol = PETSC_TRUE;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@
  KSPConvergedDefaultSetConvergedMaxits - allows the default convergence test to declare convergence and return `KSP_CONVERGED_ITS` if the maximum number of iterations is reached

  Collective

  Input Parameters:
+ ksp - iterative context
- flg - boolean flag

  Options Database Key:
. -ksp_converged_maxits <bool> - Declare convergence if the maximum number of iterations is reached

  Level: intermediate

.seealso: [](ch_ksp), `KSP`, `KSPSetConvergenceTest()`, `KSPSetTolerances()`, `KSPConvergedSkip()`, `KSPConvergedReason`, `KSPGetConvergedReason()`, `KSPConvergedDefaultSetUMIRNorm()`, `KSPConvergedDefaultSetUIRNorm()`
@*/
PetscErrorCode KSPConvergedDefaultSetConvergedMaxits(KSP ksp, PetscBool flg)
{
  KSPConvergedDefaultCtx *ctx = (KSPConvergedDefaultCtx *)ksp->cnvP;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(ksp, KSP_CLASSID, 1);
  PetscValidLogicalCollectiveBool(ksp, flg, 2);
  if (ksp->converged != KSPConvergedDefault) PetscFunctionReturn(PETSC_SUCCESS);
  ctx->convmaxits = flg;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  KSPConvergedDefault - Default code to determine convergence of the linear iterative solvers

  Collective

  Input Parameters:
+ ksp   - iterative context
. n     - iteration number
. rnorm - residual norm (may be estimated, depending on the method may be the preconditioned residual norm)
- ctx   - convergence context which must be created by `KSPConvergedDefaultCreate()`

  Output Parameter:
. reason - the convergence reason; it is positive if the iteration has converged,
           negative if the iteration has diverged, and `KSP_CONVERGED_ITERATING` otherwise

  Options Database Keys:
+ -ksp_max_it                                  - maximum number of linear iterations
. -ksp_min_it                                  - minimum number of linear iterations, defaults to 0
. -ksp_rtol rtol                               - relative tolerance used in default determination of convergence, i.e. if residual norm decreases by this factor than convergence is declared
. -ksp_atol abstol                             - absolute tolerance used in default convergence test, i.e. if residual norm is less than this then convergence is declared
. -ksp_divtol tol                              - if residual norm increases by this factor than divergence is declared
. -ksp_converged_use_initial_residual_norm     - see `KSPConvergedDefaultSetUIRNorm()`
. -ksp_converged_use_min_initial_residual_norm - see `KSPConvergedDefaultSetUMIRNorm()`
- -ksp_converged_maxits                        - see `KSPConvergedDefaultSetConvergedMaxits()`

  Level: advanced

  Notes:
  `KSPConvergedDefault()` reaches convergence when   rnorm < MAX (rtol * rnorm_0, abstol);
  Divergence is detected if rnorm > dtol * rnorm_0, or when failures are detected throughout the iteration.
  By default, reaching the maximum number of iterations is considered divergence (i.e. `KSP_DIVERGED_ITS`).
  In order to have PETSc declaring convergence in such a case (i.e. `KSP_CONVERGED_ITS`), users can use `KSPConvergedDefaultSetConvergedMaxits()`

  where\:
+     `rtol` - relative tolerance,
.     `abstol` - absolute tolerance.
.     `dtol` - divergence tolerance,
-     `rnorm_0` - the two norm of the right-hand side (or the preconditioned norm, depending on what was set with
  `KSPSetNormType()`). When initial guess is non-zero you
  can call `KSPConvergedDefaultSetUIRNorm()` to use the norm of (b - A*(initial guess))
  as the starting point for relative norm convergence testing, that is as `rnorm_0`.
  Call `KSPConvergedDefaultSetUMIRNorm()` to use the minimum of the norm of (b - A*(initial guess)) and the norm of b as the starting point.

  Use `KSPSetTolerances()` to alter the defaults for `rtol`, `abstol`, `dtol`.

  Use `KSPSetNormType()` (or `-ksp_norm_type <none,preconditioned,unpreconditioned,natural>`) to change the norm used for computing rnorm

  The precise values of reason are available in `KSPConvergedReason`

  This routine is used by `KSP` by default so the user generally never needs call it directly.

  Use `KSPSetConvergenceTest()` to provide your own test instead of using this one.

  Call `KSPSetConvergenceTest()` with the `ctx`, as created above and the destruction function `KSPConvergedDefaultDestroy()`

.seealso: [](ch_ksp), `KSP`, `KSPSetConvergenceTest()`, `KSPSetTolerances()`, `KSPConvergedSkip()`, `KSPConvergedReason`, `KSPGetConvergedReason()`,
          `KSPSetMinimumIterations()`, `KSPConvergenceTestFn`,
          `KSPConvergedDefaultSetUIRNorm()`, `KSPConvergedDefaultSetUMIRNorm()`, `KSPConvergedDefaultSetConvergedMaxits()`, `KSPConvergedDefaultCreate()`, `KSPConvergedDefaultDestroy()`
@*/
PetscErrorCode KSPConvergedDefault(KSP ksp, PetscInt n, PetscReal rnorm, KSPConvergedReason *reason, PetscCtx ctx)
{
  KSPConvergedDefaultCtx *cctx = (KSPConvergedDefaultCtx *)ctx;
  KSPNormType             normtype;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(ksp, KSP_CLASSID, 1);
  PetscValidLogicalCollectiveInt(ksp, n, 2);
  PetscAssertPointer(reason, 4);
  PetscCheck(cctx, PetscObjectComm((PetscObject)ksp), PETSC_ERR_ARG_NULL, "Convergence context must have been created with KSPConvergedDefaultCreate()");
  *reason = KSP_CONVERGED_ITERATING;

  if (cctx->convmaxits && n >= ksp->max_it) {
    *reason = KSP_CONVERGED_ITS;
    PetscCall(PetscInfo(ksp, "Linear solver has converged. Maximum number of iterations reached %" PetscInt_FMT "\n", n));
    PetscFunctionReturn(PETSC_SUCCESS);
  }
  PetscCall(KSPGetNormType(ksp, &normtype));
  if (normtype == KSP_NORM_NONE) PetscFunctionReturn(PETSC_SUCCESS);

  if (!n) {
    /* if user gives initial guess need to compute norm of b */
    if (!ksp->guess_zero && !cctx->initialrtol) {
      PetscReal snorm = 0.0;
      if (ksp->normtype == KSP_NORM_UNPRECONDITIONED || ksp->pc_side == PC_RIGHT) {
        PetscCall(PetscInfo(ksp, "user has provided nonzero initial guess, computing 2-norm of RHS\n"));
        PetscCall(VecNorm(ksp->vec_rhs, NORM_2, &snorm)); /*     <- b'*b */
      } else {
        Vec z;
        /* Should avoid allocating the z vector each time but cannot stash it in cctx because if KSPReset() is called the vector size might change */
        PetscCall(VecDuplicate(ksp->vec_rhs, &z));
        PetscCall(KSP_PCApply(ksp, ksp->vec_rhs, z));
        if (ksp->normtype == KSP_NORM_PRECONDITIONED) {
          PetscCall(PetscInfo(ksp, "user has provided nonzero initial guess, computing 2-norm of preconditioned RHS\n"));
          PetscCall(VecNorm(z, NORM_2, &snorm)); /*    dp <- b'*B'*B*b */
        } else if (ksp->normtype == KSP_NORM_NATURAL) {
          PetscScalar norm;
          PetscCall(PetscInfo(ksp, "user has provided nonzero initial guess, computing natural norm of RHS\n"));
          PetscCall(VecDot(ksp->vec_rhs, z, &norm));
          snorm = PetscSqrtReal(PetscAbsScalar(norm)); /*    dp <- b'*B*b */
        }
        PetscCall(VecDestroy(&z));
      }
      /* handle special case of zero RHS and nonzero guess */
      if (!snorm) {
        PetscCall(PetscInfo(ksp, "Special case, user has provided nonzero initial guess and zero RHS\n"));
        snorm = rnorm;
      }
      if (cctx->mininitialrtol) ksp->rnorm0 = PetscMin(snorm, rnorm);
      else ksp->rnorm0 = snorm;
    } else {
      ksp->rnorm0 = rnorm;
    }
    ksp->ttol = PetscMax(ksp->rtol * ksp->rnorm0, ksp->abstol);
  }

  if (n <= ksp->chknorm) PetscFunctionReturn(PETSC_SUCCESS);

  if (PetscIsInfOrNanReal(rnorm)) {
    PCFailedReason pcreason;
    PetscCall(PCReduceFailedReason(ksp->pc));
    PetscCall(PCGetFailedReason(ksp->pc, &pcreason));
    if (pcreason) {
      *reason = KSP_DIVERGED_PC_FAILED;
      PetscCall(PetscInfo(ksp, "Linear solver pcsetup fails, declaring divergence \n"));
    } else {
      *reason = KSP_DIVERGED_NANORINF;
      PetscCall(PetscInfo(ksp, "Linear solver has created a not a number (NaN) as the residual norm, declaring divergence \n"));
    }
    PetscFunctionReturn(PETSC_SUCCESS);
  }

  if (n < ksp->min_it) PetscFunctionReturn(PETSC_SUCCESS);

  if (rnorm <= ksp->ttol) {
    if (rnorm < ksp->abstol) {
      PetscCall(PetscInfo(ksp, "Linear solver has converged. Residual norm %14.12e is less than absolute tolerance %14.12e at iteration %" PetscInt_FMT "\n", (double)rnorm, (double)ksp->abstol, n));
      *reason = KSP_CONVERGED_ATOL;
    } else {
      if (cctx->initialrtol) {
        PetscCall(PetscInfo(ksp, "Linear solver has converged. Residual norm %14.12e is less than relative tolerance %14.12e times initial residual norm %14.12e at iteration %" PetscInt_FMT "\n", (double)rnorm, (double)ksp->rtol, (double)ksp->rnorm0, n));
      } else {
        PetscCall(PetscInfo(ksp, "Linear solver has converged. Residual norm %14.12e is less than relative tolerance %14.12e times initial right-hand side norm %14.12e at iteration %" PetscInt_FMT "\n", (double)rnorm, (double)ksp->rtol, (double)ksp->rnorm0, n));
      }
      *reason = KSP_CONVERGED_RTOL;
    }
  } else if (rnorm >= ksp->divtol * ksp->rnorm0) {
    PetscCall(PetscInfo(ksp, "Linear solver is diverging. Initial right hand size norm %14.12e, current residual norm %14.12e at iteration %" PetscInt_FMT "\n", (double)ksp->rnorm0, (double)rnorm, n));
    *reason = KSP_DIVERGED_DTOL;
  }
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  KSPConvergedDefaultDestroy - Frees the space used by the `KSPConvergedDefault()` function context

  Not Collective

  Input Parameter:
. ctx - convergence context

  Level: intermediate

  Note:
  Pass this function name into `KSPSetConvergenceTest()` along with the context obtained with `KSPConvergedDefaultCreate()` and `KSPConvergedDefault()`

.seealso: [](ch_ksp), `KSP`, `KSPConvergedDefault()`, `KSPConvergedDefaultCreate()`, `KSPSetConvergenceTest()`, `KSPSetTolerances()`, `KSPConvergedSkip()`,
          `KSPConvergedReason`, `KSPGetConvergedReason()`, `KSPConvergedDefaultSetUIRNorm()`, `KSPConvergedDefaultSetUMIRNorm()`
@*/
PetscErrorCode KSPConvergedDefaultDestroy(PetscCtxRt ctx)
{
  KSPConvergedDefaultCtx *cctx = *(KSPConvergedDefaultCtx **)ctx;

  PetscFunctionBegin;
  PetscCall(VecDestroy(&cctx->work));
  PetscCall(PetscFree(cctx));
  PetscFunctionReturn(PETSC_SUCCESS);
}

// PetscClangLinter pragma disable: -fdoc-sowing-chars
/*
  KSPBuildSolutionDefault - Default code to build/move the solution.

  Collective

  Input Parameters:
+ ksp - iterative context
- v   - pointer to the user's vector

  Output Parameter:
. V - pointer to a vector containing the solution

  Level: advanced

  Note:
  Some `KSP` methods such as `KSPGMRES` do not compute the explicit solution at each iteration, this routine takes the information
  they have computed during the previous iterations and uses it to compute the explicit solution

  Developer Note:
  This is `PETSC_EXTERN` because it may be used by user written plugin `KSPType` implementations

.seealso: [](ch_ksp), `KSP`, `KSPGetSolution()`, `KSPBuildResidualDefault()`
*/
PetscErrorCode KSPBuildSolutionDefault(KSP ksp, Vec v, Vec *V)
{
  PetscFunctionBegin;
  if (ksp->pc_side == PC_RIGHT) {
    if (ksp->pc) {
      PetscCheck(v, PetscObjectComm((PetscObject)ksp), PETSC_ERR_SUP, "Not working with right preconditioner");
      PetscCall(KSP_PCApply(ksp, ksp->vec_sol, v));
      *V = v;
    } else {
      if (v) {
        PetscCall(VecCopy(ksp->vec_sol, v));
        *V = v;
      } else *V = ksp->vec_sol;
    }
  } else if (ksp->pc_side == PC_SYMMETRIC) {
    if (ksp->pc) {
      PetscCheck(!ksp->transpose_solve, PetscObjectComm((PetscObject)ksp), PETSC_ERR_SUP, "Not working with symmetric preconditioner and transpose solve");
      PetscCheck(v, PetscObjectComm((PetscObject)ksp), PETSC_ERR_SUP, "Not working with symmetric preconditioner");
      PetscCall(PCApplySymmetricRight(ksp->pc, ksp->vec_sol, v));
      *V = v;
    } else {
      if (v) {
        PetscCall(VecCopy(ksp->vec_sol, v));
        *V = v;
      } else *V = ksp->vec_sol;
    }
  } else {
    if (v) {
      PetscCall(VecCopy(ksp->vec_sol, v));
      *V = v;
    } else *V = ksp->vec_sol;
  }
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@
  KSPBuildResidualDefault - Default code to compute the residual.

  Collecive on ksp

  Input Parameters:
+ ksp - iterative context
. t   - pointer to temporary vector
- v   - pointer to user vector

  Output Parameter:
. V - pointer to a vector containing the residual

  Level: advanced

  Note:
  Some `KSP` methods such as `KSPGMRES` do not compute the explicit residual at each iteration, this routine takes the information
  they have computed during the previous iterations and uses it to compute the explicit residual via the formula r = b - A*x.

  Developer Note:
  This is `PETSC_EXTERN` because it may be used by user written plugin `KSPType` implementations

.seealso: [](ch_ksp), `KSP`, `KSPBuildSolutionDefault()`
@*/
PetscErrorCode KSPBuildResidualDefault(KSP ksp, Vec t, Vec v, Vec *V)
{
  Mat Amat, Pmat;

  PetscFunctionBegin;
  if (!ksp->pc) PetscCall(KSPGetPC(ksp, &ksp->pc));
  PetscCall(PCGetOperators(ksp->pc, &Amat, &Pmat));
  PetscCall(KSPBuildSolution(ksp, t, NULL));
  PetscCall(KSP_MatMult(ksp, Amat, t, v));
  PetscCall(VecAYPX(v, -1.0, ksp->vec_rhs));
  *V = v;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  KSPCreateVecs - Gets a number of work vectors suitably sized for the operator in the `KSP`

  Collective

  Input Parameters:
+ ksp    - iterative context
. rightn - number of right work vectors to allocate
- leftn  - number of left work vectors to allocate

  Output Parameters:
+ right - the array of vectors created
- left  - the array of left vectors

  Level: advanced

  Notes:
  The right vector has as many elements as the matrix has columns. The left
  vector has as many elements as the matrix has rows, see `MatSetSizes()` for details on the layout of the vectors.

  The vectors are new vectors that are not owned by the `KSP`, they should be destroyed with calls to `VecDestroyVecs()` when no longer needed.

  Developer Note:
  First tries to duplicate the rhs and solution vectors of the `KSP`, if they do not exist tries to get them from the matrix with `MatCreateVecs()`, if
  that does not exist tries to get them from the `DM` (if it is provided) with `DMCreateGlobalVectors()`.

.seealso: [](ch_ksp), `MatCreateVecs()`, `VecDestroyVecs()`, `KSPSetWorkVecs()`
@*/
PetscErrorCode KSPCreateVecs(KSP ksp, PetscInt rightn, Vec *right[], PetscInt leftn, Vec *left[])
{
  Vec       vecr = NULL, vecl = NULL;
  PetscBool matset, pmatset, isshell, preferdm = PETSC_FALSE;
  Mat       mat = NULL;

  PetscFunctionBegin;
  if (ksp->dm) {
    PetscCall(PetscObjectTypeCompare((PetscObject)ksp->dm, DMSHELL, &isshell));
    preferdm = isshell ? PETSC_FALSE : PETSC_TRUE;
  }
  if (rightn) {
    PetscCheck(right, PetscObjectComm((PetscObject)ksp), PETSC_ERR_ARG_INCOMP, "You asked for right vectors but did not pass a pointer to hold them");
    if (ksp->vec_sol) vecr = ksp->vec_sol;
    else {
      if (preferdm) {
        PetscCall(DMGetGlobalVector(ksp->dm, &vecr));
      } else if (ksp->pc) {
        PetscCall(PCGetOperatorsSet(ksp->pc, &matset, &pmatset));
        /* check for mat before pmat because for KSPLSQR pmat may be a different size than mat since pmat maybe mat'*mat */
        if (matset) {
          PetscCall(PCGetOperators(ksp->pc, &mat, NULL));
          PetscCall(MatCreateVecs(mat, &vecr, NULL));
        } else if (pmatset) {
          PetscCall(PCGetOperators(ksp->pc, NULL, &mat));
          PetscCall(MatCreateVecs(mat, &vecr, NULL));
        }
      }
      if (!vecr && ksp->dm) PetscCall(DMGetGlobalVector(ksp->dm, &vecr));
      PetscCheck(vecr, PetscObjectComm((PetscObject)ksp), PETSC_ERR_ARG_WRONGSTATE, "You requested a vector from a KSP that cannot provide one");
    }
    PetscCall(VecDuplicateVecs(vecr, rightn, right));
    if (!ksp->vec_sol) {
      if (preferdm) {
        PetscCall(DMRestoreGlobalVector(ksp->dm, &vecr));
      } else if (mat) {
        PetscCall(VecDestroy(&vecr));
      } else if (ksp->dm) {
        PetscCall(DMRestoreGlobalVector(ksp->dm, &vecr));
      }
    }
  }
  if (leftn) {
    PetscCheck(left, PetscObjectComm((PetscObject)ksp), PETSC_ERR_ARG_INCOMP, "You asked for left vectors but did not pass a pointer to hold them");
    if (ksp->vec_rhs) vecl = ksp->vec_rhs;
    else {
      if (preferdm) {
        PetscCall(DMGetGlobalVector(ksp->dm, &vecl));
      } else if (ksp->pc) {
        PetscCall(PCGetOperatorsSet(ksp->pc, &matset, &pmatset));
        /* check for mat before pmat because for KSPLSQR pmat may be a different size than mat since pmat maybe mat'*mat */
        if (matset) {
          PetscCall(PCGetOperators(ksp->pc, &mat, NULL));
          PetscCall(MatCreateVecs(mat, NULL, &vecl));
        } else if (pmatset) {
          PetscCall(PCGetOperators(ksp->pc, NULL, &mat));
          PetscCall(MatCreateVecs(mat, NULL, &vecl));
        }
      }
      if (!vecl && ksp->dm) PetscCall(DMGetGlobalVector(ksp->dm, &vecl));
      PetscCheck(vecl, PetscObjectComm((PetscObject)ksp), PETSC_ERR_ARG_WRONGSTATE, "You requested a vector from a KSP that cannot provide one");
    }
    PetscCall(VecDuplicateVecs(vecl, leftn, left));
    if (!ksp->vec_rhs) {
      if (preferdm) {
        PetscCall(DMRestoreGlobalVector(ksp->dm, &vecl));
      } else if (mat) {
        PetscCall(VecDestroy(&vecl));
      } else if (ksp->dm) {
        PetscCall(DMRestoreGlobalVector(ksp->dm, &vecl));
      }
    }
  }
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@
  KSPSetWorkVecs - Sets a number of work vectors into a `KSP` object

  Collective

  Input Parameters:
+ ksp - iterative context
- nw  - number of work vectors to allocate

  Level: developer

  Developer Note:
  This is `PETSC_EXTERN` because it may be used by user written plugin `KSPType` implementations

.seealso: [](ch_ksp), `KSP`, `KSPCreateVecs()`
@*/
PetscErrorCode KSPSetWorkVecs(KSP ksp, PetscInt nw)
{
  PetscFunctionBegin;
  PetscCall(VecDestroyVecs(ksp->nwork, &ksp->work));
  ksp->nwork = nw;
  PetscCall(KSPCreateVecs(ksp, nw, &ksp->work, 0, NULL));
  PetscFunctionReturn(PETSC_SUCCESS);
}

// PetscClangLinter pragma disable: -fdoc-sowing-chars
/*
  KSPDestroyDefault - Destroys a iterative context variable for methods with no separate context.  Preferred calling sequence `KSPDestroy()`.

  Input Parameter:
. ksp - the iterative context

  Level: advanced

  Developer Note:
  This is `PETSC_EXTERN` because it may be used by user written plugin `KSPType` implementations

.seealso: [](ch_ksp), `KSP`, `KSPDestroy()`
*/
PetscErrorCode KSPDestroyDefault(KSP ksp)
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(ksp, KSP_CLASSID, 1);
  PetscCall(PetscFree(ksp->data));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@
  KSPGetConvergedReason - Gets the reason the `KSP` iteration was stopped.

  Not Collective

  Input Parameter:
. ksp - the `KSP` context

  Output Parameter:
. reason - negative value indicates diverged, positive value converged, see `KSPConvergedReason` for the possible values

  Options Database Key:
. -ksp_converged_reason - prints the reason to standard out when the solve ends

  Level: intermediate

  Note:
  If this routine is called before or doing the `KSPSolve()` the value of `KSP_CONVERGED_ITERATING` is returned

.seealso: [](ch_ksp), `KSPConvergedReason`, `KSP`, `KSPSetConvergenceTest()`, `KSPConvergedDefault()`, `KSPSetTolerances()`,
          `KSPConvergedReasonView()`, `KSPGetConvergedReasonString()`
@*/
PetscErrorCode KSPGetConvergedReason(KSP ksp, KSPConvergedReason *reason)
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(ksp, KSP_CLASSID, 1);
  PetscAssertPointer(reason, 2);
  *reason = ksp->reason;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@C
  KSPGetConvergedReasonString - Return a human readable string for a `KSPConvergedReason`

  Not Collective

  Input Parameter:
. ksp - the `KSP` context

  Output Parameter:
. strreason - a human readable string that describes ksp converged reason

  Level: beginner

.seealso: [](ch_ksp), `KSP`, `KSPGetConvergedReason()`
@*/
PetscErrorCode KSPGetConvergedReasonString(KSP ksp, const char *strreason[])
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(ksp, KSP_CLASSID, 1);
  PetscAssertPointer(strreason, 2);
  *strreason = KSPConvergedReasons[ksp->reason];
  PetscFunctionReturn(PETSC_SUCCESS);
}

#include <petsc/private/dmimpl.h>
/*@
  KSPSetDM - Sets the `DM` that may be used by some preconditioners and that may be used to construct the linear system

  Logically Collective

  Input Parameters:
+ ksp - the `KSP`
- dm  - the `DM`, cannot be `NULL` to remove a previously set `DM`

  Level: intermediate

  Notes:
  If this is used then the `KSP` will attempt to use the `DM` to create the matrix and use the routine set with
  `DMKSPSetComputeOperators()`. Use `KSPSetDMActive`(ksp, `KSP_DMACTIVE_OPERATOR`, `PETSC_FALSE`) to instead use the matrix you've provided with
  `KSPSetOperators()`.

  A `DM` can only be used for solving one problem at a time because information about the problem is stored on the `DM`,
  even when not using interfaces like `DMKSPSetComputeOperators()`.  Use `DMClone()` to get a distinct `DM` when solving
  different problems using the same function space.

.seealso: [](ch_ksp), `KSP`, `DM`, `KSPGetDM()`, `KSPSetDMActive()`, `KSPSetComputeOperators()`, `KSPSetComputeRHS()`, `KSPSetComputeInitialGuess()`, `DMKSPSetComputeOperators()`, `DMKSPSetComputeRHS()`, `DMKSPSetComputeInitialGuess()`
@*/
PetscErrorCode KSPSetDM(KSP ksp, DM dm)
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(ksp, KSP_CLASSID, 1);
  PetscValidHeaderSpecific(dm, DM_CLASSID, 2);
  PetscCall(PetscObjectReference((PetscObject)dm));
  if (ksp->dm) { /* Move the DMSNES context over to the new DM unless the new DM already has one */
    if (ksp->dm->dmksp && !dm->dmksp) {
      DMKSP kdm;
      PetscCall(DMCopyDMKSP(ksp->dm, dm));
      PetscCall(DMGetDMKSP(ksp->dm, &kdm));
      if (kdm->originaldm == ksp->dm) kdm->originaldm = dm; /* Grant write privileges to the replacement DM */
    }
    PetscCall(DMDestroy(&ksp->dm));
  }
  ksp->dm       = dm;
  ksp->dmAuto   = PETSC_FALSE;
  ksp->dmActive = KSP_DMACTIVE_ALL;
  if (ksp->pc) PetscCall(PCSetDM(ksp->pc, dm));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@
  KSPSetDMActive - Indicates the `DM` should be used to generate the linear system matrix, the right-hand side vector, and the initial guess

  Logically Collective

  Input Parameters:
+ ksp    - the `KSP`
. active - one of `KSP_DMACTIVE_OPERATOR`, `KSP_DMACTIVE_RHS`, or `KSP_DMACTIVE_INITIAL_GUESS`
- flg    - use the `DM`

  Level: intermediate

  Note:
  By default `KSPSetDM()` sets the `DM` as active.

.seealso: [](ch_ksp), `KSP`, `DM`, `KSPGetDM()`, `KSPSetDM()`, `SNESSetDM()`, `KSPSetComputeOperators()`, `KSPSetComputeRHS()`, `KSPSetComputeInitialGuess()`
@*/
PetscErrorCode KSPSetDMActive(KSP ksp, KSPDMActive active, PetscBool flg)
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(ksp, KSP_CLASSID, 1);
  PetscValidLogicalCollectiveBool(ksp, flg, 3);
  if (flg) ksp->dmActive = (KSPDMActive)(ksp->dmActive | active);
  else ksp->dmActive = (KSPDMActive)(ksp->dmActive & ~active);
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@
  KSPGetDM - Gets the `DM` that may be used by some preconditioners and that may be used to construct the linear system

  Not Collective

  Input Parameter:
. ksp - the `KSP`

  Output Parameter:
. dm - the `DM`

  Level: intermediate

.seealso: [](ch_ksp), `KSP`, `DM`, `KSPSetDM()`, `KSPSetDMActive()`
@*/
PetscErrorCode KSPGetDM(KSP ksp, DM *dm)
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(ksp, KSP_CLASSID, 1);
  if (!ksp->dm) {
    PetscCall(DMShellCreate(PetscObjectComm((PetscObject)ksp), &ksp->dm));
    ksp->dmAuto = PETSC_TRUE;
  }
  *dm = ksp->dm;
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@
  KSPSetApplicationContext - Sets the optional user-defined context for the linear solver.

  Logically Collective

  Input Parameters:
+ ksp - the `KSP` context
- ctx - user context

  Level: intermediate

  Notes:
  The user context is a way for users to attach any information to the `KSP` that they may need later when interacting with the `KSP`

  Use `KSPGetApplicationContext()` to get access to the context at a later time.

  Fortran Note:
  This only works when `ctx` is a Fortran derived type (it cannot be a `PetscObject`), we recommend writing a Fortran interface definition for this
  function that tells the Fortran compiler the derived data type that is passed in as the `ctx` argument. See `KSPGetApplicationContext()` for
  an example.

.seealso: [](ch_ksp), `KSP`, `KSPGetApplicationContext()`
@*/
PetscErrorCode KSPSetApplicationContext(KSP ksp, PetscCtx ctx)
{
  PC pc;

  PetscFunctionBegin;
  PetscValidHeaderSpecific(ksp, KSP_CLASSID, 1);
  ksp->ctx = ctx;
  PetscCall(KSPGetPC(ksp, &pc));
  PetscCall(PCSetApplicationContext(pc, ctx));
  PetscFunctionReturn(PETSC_SUCCESS);
}

/*@
  KSPGetApplicationContext - Gets the user-defined context for the linear solver set with `KSPSetApplicationContext()`

  Not Collective

  Input Parameter:
. ksp - `KSP` context

  Output Parameter:
. ctx - a pointer to the application context

  Level: intermediate

  Fortran Notes:
  This only works when the context is a Fortran derived type or a `PetscObject`. Define `ctx` with
.vb
  type(tUsertype), pointer :: ctx
.ve

.seealso: [](ch_ksp), `KSP`, `KSPSetApplicationContext()`
@*/
PetscErrorCode KSPGetApplicationContext(KSP ksp, PetscCtxRt ctx)
{
  PetscFunctionBegin;
  PetscValidHeaderSpecific(ksp, KSP_CLASSID, 1);
  *(void **)ctx = ksp->ctx;
  PetscFunctionReturn(PETSC_SUCCESS);
}

#include <petsc/private/pcimpl.h>

/*@
  KSPCheckSolve - Checks if the `PCSetUp()` or `KSPSolve()` failed and set the error flag for the outer `PC`. A `KSP_DIVERGED_ITS` is
  not considered a failure in this context

  Collective

  Input Parameters:
+ ksp - the linear solver `KSP` context.
. pc  - the preconditioner context
- vec - a vector that will be initialized with infinity to indicate lack of convergence

  Level: developer

  Note:
  This is called within `PCApply()` implementations to check if an error has been detected on any particular MPI processes. By initializing the vector
  with infinity the next call to `KSPCheckNorm()` or `KSPCheckDot()` will provide the same information to all the MPI processes that an error occurred on
  at least one of the processes.

  This may be called by a subset of the processes in the `PC`.

  Developer Note:
  This is used to manage returning with appropriate information from preconditioners whose inner `KSP` solvers have failed in some way

.seealso: [](ch_ksp), `KSP`, `KSPCreate()`, `KSPSetType()`, `KSPCheckNorm()`, `KSPCheckDot()`
@*/
PetscErrorCode KSPCheckSolve(KSP ksp, PC pc, Vec vec)
{
  PCFailedReason pcreason;
  PC             subpc;

  PetscFunctionBegin;
  PetscCall(KSPGetPC(ksp, &subpc));
  PetscCall(PCGetFailedReason(subpc, &pcreason));
  PetscCall(VecFlag(vec, pcreason || (ksp->reason < 0 && ksp->reason != KSP_DIVERGED_ITS)));
  if (pcreason || (ksp->reason < 0 && ksp->reason != KSP_DIVERGED_ITS)) {
    PetscCheck(!pc->erroriffailure, PETSC_COMM_SELF, PETSC_ERR_NOT_CONVERGED, "Detected not converged in KSP inner solve: KSP reason %s PC reason %s", KSPConvergedReasons[ksp->reason], PCFailedReasons[pcreason]);
    PetscCall(PetscInfo(ksp, "Detected not converged in KSP inner solve: KSP reason %s PC reason %s\n", KSPConvergedReasons[ksp->reason], PCFailedReasons[pcreason]));
    pc->failedreason = PC_SUBPC_ERROR;
  }
  PetscFunctionReturn(PETSC_SUCCESS);
}