| /libCEED/examples/fluids/tests-output/ |
| HD | fluids-navierstokes-blasius-sgs-data-driven.bin | 0814d5a7c7108099a9a6106ea0d2f7f6b264fad8 Wed Aug 02 16:40:58 UTC 2023 Kenneth E. Jansen <Kenneth.Jansen@colorado.edu> PetscFE determines basis for examples/fluids/navierstokes (#1264)
* breaking lots of DL stuff to test PetscFE
* fixed missing header
* fluids: Remove unused `Involute` function
* fluids: Set quadrature points for PetscFE
* fluids: Fix GetRestrictionForDomain, Use CreateBasisFromPlex
* fluids: Remove Q_sur arg from SetupStrongBC_Ceed
* fluids: Remove extra SetClosurePermutationTensor
* fluids: Correct quadrature order to auxillary DMs
- Should factor in q_extra
* fluids: Fix parent Restriction creation for spanstats
* fluids: Correct qdata creation for strong bcs
* fluids: Set tensor closer only for tensor-product elements
Co-authored-by: Jeremy L Thompson <jeremy@jeremylt.org>
* fluids: Make shocktube test less brittle
- Small, insignificant changes to the coordinate locations make a
dramatic difference to the initial condition
- For the test case, there is a node right at the midpoint of the
domain. Adding the epsilon fudge factor makes the if statement more
stable
* fluids: Fix SGS test
- Change the test so that it passes on all hardware. It's a very
sentitive test and the changes to the basis creation changed the
initial conditions *just* enough to make the test not happy. Should
really try and make this more robust at some point...
* fluids: Address misc PR comments
* fluids: Remove quad_mode arg from CreateBasisFromPlex
---------
Co-authored-by: James Wright <james@jameswright.xyz>
Co-authored-by: Jeremy L Thompson <jeremy@jeremylt.org>
|
| /libCEED/examples/fluids/src/ |
| H A D | grid_anisotropy_tensor.c | 0814d5a7c7108099a9a6106ea0d2f7f6b264fad8 Wed Aug 02 16:40:58 UTC 2023 Kenneth E. Jansen <Kenneth.Jansen@colorado.edu> PetscFE determines basis for examples/fluids/navierstokes (#1264)
* breaking lots of DL stuff to test PetscFE
* fixed missing header
* fluids: Remove unused `Involute` function
* fluids: Set quadrature points for PetscFE
* fluids: Fix GetRestrictionForDomain, Use CreateBasisFromPlex
* fluids: Remove Q_sur arg from SetupStrongBC_Ceed
* fluids: Remove extra SetClosurePermutationTensor
* fluids: Correct quadrature order to auxillary DMs
- Should factor in q_extra
* fluids: Fix parent Restriction creation for spanstats
* fluids: Correct qdata creation for strong bcs
* fluids: Set tensor closer only for tensor-product elements
Co-authored-by: Jeremy L Thompson <jeremy@jeremylt.org>
* fluids: Make shocktube test less brittle
- Small, insignificant changes to the coordinate locations make a
dramatic difference to the initial condition
- For the test case, there is a node right at the midpoint of the
domain. Adding the epsilon fudge factor makes the if statement more
stable
* fluids: Fix SGS test
- Change the test so that it passes on all hardware. It's a very
sentitive test and the changes to the basis creation changed the
initial conditions *just* enough to make the test not happy. Should
really try and make this more robust at some point...
* fluids: Address misc PR comments
* fluids: Remove quad_mode arg from CreateBasisFromPlex
---------
Co-authored-by: James Wright <james@jameswright.xyz>
Co-authored-by: Jeremy L Thompson <jeremy@jeremylt.org>
|
| H A D | strong_boundary_conditions.c | 0814d5a7c7108099a9a6106ea0d2f7f6b264fad8 Wed Aug 02 16:40:58 UTC 2023 Kenneth E. Jansen <Kenneth.Jansen@colorado.edu> PetscFE determines basis for examples/fluids/navierstokes (#1264)
* breaking lots of DL stuff to test PetscFE
* fixed missing header
* fluids: Remove unused `Involute` function
* fluids: Set quadrature points for PetscFE
* fluids: Fix GetRestrictionForDomain, Use CreateBasisFromPlex
* fluids: Remove Q_sur arg from SetupStrongBC_Ceed
* fluids: Remove extra SetClosurePermutationTensor
* fluids: Correct quadrature order to auxillary DMs
- Should factor in q_extra
* fluids: Fix parent Restriction creation for spanstats
* fluids: Correct qdata creation for strong bcs
* fluids: Set tensor closer only for tensor-product elements
Co-authored-by: Jeremy L Thompson <jeremy@jeremylt.org>
* fluids: Make shocktube test less brittle
- Small, insignificant changes to the coordinate locations make a
dramatic difference to the initial condition
- For the test case, there is a node right at the midpoint of the
domain. Adding the epsilon fudge factor makes the if statement more
stable
* fluids: Fix SGS test
- Change the test so that it passes on all hardware. It's a very
sentitive test and the changes to the basis creation changed the
initial conditions *just* enough to make the test not happy. Should
really try and make this more robust at some point...
* fluids: Address misc PR comments
* fluids: Remove quad_mode arg from CreateBasisFromPlex
---------
Co-authored-by: James Wright <james@jameswright.xyz>
Co-authored-by: Jeremy L Thompson <jeremy@jeremylt.org>
|
| H A D | velocity_gradient_projection.c | 0814d5a7c7108099a9a6106ea0d2f7f6b264fad8 Wed Aug 02 16:40:58 UTC 2023 Kenneth E. Jansen <Kenneth.Jansen@colorado.edu> PetscFE determines basis for examples/fluids/navierstokes (#1264)
* breaking lots of DL stuff to test PetscFE
* fixed missing header
* fluids: Remove unused `Involute` function
* fluids: Set quadrature points for PetscFE
* fluids: Fix GetRestrictionForDomain, Use CreateBasisFromPlex
* fluids: Remove Q_sur arg from SetupStrongBC_Ceed
* fluids: Remove extra SetClosurePermutationTensor
* fluids: Correct quadrature order to auxillary DMs
- Should factor in q_extra
* fluids: Fix parent Restriction creation for spanstats
* fluids: Correct qdata creation for strong bcs
* fluids: Set tensor closer only for tensor-product elements
Co-authored-by: Jeremy L Thompson <jeremy@jeremylt.org>
* fluids: Make shocktube test less brittle
- Small, insignificant changes to the coordinate locations make a
dramatic difference to the initial condition
- For the test case, there is a node right at the midpoint of the
domain. Adding the epsilon fudge factor makes the if statement more
stable
* fluids: Fix SGS test
- Change the test so that it passes on all hardware. It's a very
sentitive test and the changes to the basis creation changed the
initial conditions *just* enough to make the test not happy. Should
really try and make this more robust at some point...
* fluids: Address misc PR comments
* fluids: Remove quad_mode arg from CreateBasisFromPlex
---------
Co-authored-by: James Wright <james@jameswright.xyz>
Co-authored-by: Jeremy L Thompson <jeremy@jeremylt.org>
|
| H A D | differential_filter.c | 0814d5a7c7108099a9a6106ea0d2f7f6b264fad8 Wed Aug 02 16:40:58 UTC 2023 Kenneth E. Jansen <Kenneth.Jansen@colorado.edu> PetscFE determines basis for examples/fluids/navierstokes (#1264)
* breaking lots of DL stuff to test PetscFE
* fixed missing header
* fluids: Remove unused `Involute` function
* fluids: Set quadrature points for PetscFE
* fluids: Fix GetRestrictionForDomain, Use CreateBasisFromPlex
* fluids: Remove Q_sur arg from SetupStrongBC_Ceed
* fluids: Remove extra SetClosurePermutationTensor
* fluids: Correct quadrature order to auxillary DMs
- Should factor in q_extra
* fluids: Fix parent Restriction creation for spanstats
* fluids: Correct qdata creation for strong bcs
* fluids: Set tensor closer only for tensor-product elements
Co-authored-by: Jeremy L Thompson <jeremy@jeremylt.org>
* fluids: Make shocktube test less brittle
- Small, insignificant changes to the coordinate locations make a
dramatic difference to the initial condition
- For the test case, there is a node right at the midpoint of the
domain. Adding the epsilon fudge factor makes the if statement more
stable
* fluids: Fix SGS test
- Change the test so that it passes on all hardware. It's a very
sentitive test and the changes to the basis creation changed the
initial conditions *just* enough to make the test not happy. Should
really try and make this more robust at some point...
* fluids: Address misc PR comments
* fluids: Remove quad_mode arg from CreateBasisFromPlex
---------
Co-authored-by: James Wright <james@jameswright.xyz>
Co-authored-by: Jeremy L Thompson <jeremy@jeremylt.org>
|
| H A D | turb_spanstats.c | 0814d5a7c7108099a9a6106ea0d2f7f6b264fad8 Wed Aug 02 16:40:58 UTC 2023 Kenneth E. Jansen <Kenneth.Jansen@colorado.edu> PetscFE determines basis for examples/fluids/navierstokes (#1264)
* breaking lots of DL stuff to test PetscFE
* fixed missing header
* fluids: Remove unused `Involute` function
* fluids: Set quadrature points for PetscFE
* fluids: Fix GetRestrictionForDomain, Use CreateBasisFromPlex
* fluids: Remove Q_sur arg from SetupStrongBC_Ceed
* fluids: Remove extra SetClosurePermutationTensor
* fluids: Correct quadrature order to auxillary DMs
- Should factor in q_extra
* fluids: Fix parent Restriction creation for spanstats
* fluids: Correct qdata creation for strong bcs
* fluids: Set tensor closer only for tensor-product elements
Co-authored-by: Jeremy L Thompson <jeremy@jeremylt.org>
* fluids: Make shocktube test less brittle
- Small, insignificant changes to the coordinate locations make a
dramatic difference to the initial condition
- For the test case, there is a node right at the midpoint of the
domain. Adding the epsilon fudge factor makes the if statement more
stable
* fluids: Fix SGS test
- Change the test so that it passes on all hardware. It's a very
sentitive test and the changes to the basis creation changed the
initial conditions *just* enough to make the test not happy. Should
really try and make this more robust at some point...
* fluids: Address misc PR comments
* fluids: Remove quad_mode arg from CreateBasisFromPlex
---------
Co-authored-by: James Wright <james@jameswright.xyz>
Co-authored-by: Jeremy L Thompson <jeremy@jeremylt.org>
|
| H A D | setupdm.c | 0814d5a7c7108099a9a6106ea0d2f7f6b264fad8 Wed Aug 02 16:40:58 UTC 2023 Kenneth E. Jansen <Kenneth.Jansen@colorado.edu> PetscFE determines basis for examples/fluids/navierstokes (#1264)
* breaking lots of DL stuff to test PetscFE
* fixed missing header
* fluids: Remove unused `Involute` function
* fluids: Set quadrature points for PetscFE
* fluids: Fix GetRestrictionForDomain, Use CreateBasisFromPlex
* fluids: Remove Q_sur arg from SetupStrongBC_Ceed
* fluids: Remove extra SetClosurePermutationTensor
* fluids: Correct quadrature order to auxillary DMs
- Should factor in q_extra
* fluids: Fix parent Restriction creation for spanstats
* fluids: Correct qdata creation for strong bcs
* fluids: Set tensor closer only for tensor-product elements
Co-authored-by: Jeremy L Thompson <jeremy@jeremylt.org>
* fluids: Make shocktube test less brittle
- Small, insignificant changes to the coordinate locations make a
dramatic difference to the initial condition
- For the test case, there is a node right at the midpoint of the
domain. Adding the epsilon fudge factor makes the if statement more
stable
* fluids: Fix SGS test
- Change the test so that it passes on all hardware. It's a very
sentitive test and the changes to the basis creation changed the
initial conditions *just* enough to make the test not happy. Should
really try and make this more robust at some point...
* fluids: Address misc PR comments
* fluids: Remove quad_mode arg from CreateBasisFromPlex
---------
Co-authored-by: James Wright <james@jameswright.xyz>
Co-authored-by: Jeremy L Thompson <jeremy@jeremylt.org>
|
| H A D | setuplibceed.c | 0814d5a7c7108099a9a6106ea0d2f7f6b264fad8 Wed Aug 02 16:40:58 UTC 2023 Kenneth E. Jansen <Kenneth.Jansen@colorado.edu> PetscFE determines basis for examples/fluids/navierstokes (#1264)
* breaking lots of DL stuff to test PetscFE
* fixed missing header
* fluids: Remove unused `Involute` function
* fluids: Set quadrature points for PetscFE
* fluids: Fix GetRestrictionForDomain, Use CreateBasisFromPlex
* fluids: Remove Q_sur arg from SetupStrongBC_Ceed
* fluids: Remove extra SetClosurePermutationTensor
* fluids: Correct quadrature order to auxillary DMs
- Should factor in q_extra
* fluids: Fix parent Restriction creation for spanstats
* fluids: Correct qdata creation for strong bcs
* fluids: Set tensor closer only for tensor-product elements
Co-authored-by: Jeremy L Thompson <jeremy@jeremylt.org>
* fluids: Make shocktube test less brittle
- Small, insignificant changes to the coordinate locations make a
dramatic difference to the initial condition
- For the test case, there is a node right at the midpoint of the
domain. Adding the epsilon fudge factor makes the if statement more
stable
* fluids: Fix SGS test
- Change the test so that it passes on all hardware. It's a very
sentitive test and the changes to the basis creation changed the
initial conditions *just* enough to make the test not happy. Should
really try and make this more robust at some point...
* fluids: Address misc PR comments
* fluids: Remove quad_mode arg from CreateBasisFromPlex
---------
Co-authored-by: James Wright <james@jameswright.xyz>
Co-authored-by: Jeremy L Thompson <jeremy@jeremylt.org>
|
| /libCEED/examples/fluids/qfunctions/ |
| H A D | shocktube.h | 0814d5a7c7108099a9a6106ea0d2f7f6b264fad8 Wed Aug 02 16:40:58 UTC 2023 Kenneth E. Jansen <Kenneth.Jansen@colorado.edu> PetscFE determines basis for examples/fluids/navierstokes (#1264)
* breaking lots of DL stuff to test PetscFE
* fixed missing header
* fluids: Remove unused `Involute` function
* fluids: Set quadrature points for PetscFE
* fluids: Fix GetRestrictionForDomain, Use CreateBasisFromPlex
* fluids: Remove Q_sur arg from SetupStrongBC_Ceed
* fluids: Remove extra SetClosurePermutationTensor
* fluids: Correct quadrature order to auxillary DMs
- Should factor in q_extra
* fluids: Fix parent Restriction creation for spanstats
* fluids: Correct qdata creation for strong bcs
* fluids: Set tensor closer only for tensor-product elements
Co-authored-by: Jeremy L Thompson <jeremy@jeremylt.org>
* fluids: Make shocktube test less brittle
- Small, insignificant changes to the coordinate locations make a
dramatic difference to the initial condition
- For the test case, there is a node right at the midpoint of the
domain. Adding the epsilon fudge factor makes the if statement more
stable
* fluids: Fix SGS test
- Change the test so that it passes on all hardware. It's a very
sentitive test and the changes to the basis creation changed the
initial conditions *just* enough to make the test not happy. Should
really try and make this more robust at some point...
* fluids: Address misc PR comments
* fluids: Remove quad_mode arg from CreateBasisFromPlex
---------
Co-authored-by: James Wright <james@jameswright.xyz>
Co-authored-by: Jeremy L Thompson <jeremy@jeremylt.org>
|
| /libCEED/examples/fluids/ |
| H A D | navierstokes.h | 0814d5a7c7108099a9a6106ea0d2f7f6b264fad8 Wed Aug 02 16:40:58 UTC 2023 Kenneth E. Jansen <Kenneth.Jansen@colorado.edu> PetscFE determines basis for examples/fluids/navierstokes (#1264)
* breaking lots of DL stuff to test PetscFE
* fixed missing header
* fluids: Remove unused `Involute` function
* fluids: Set quadrature points for PetscFE
* fluids: Fix GetRestrictionForDomain, Use CreateBasisFromPlex
* fluids: Remove Q_sur arg from SetupStrongBC_Ceed
* fluids: Remove extra SetClosurePermutationTensor
* fluids: Correct quadrature order to auxillary DMs
- Should factor in q_extra
* fluids: Fix parent Restriction creation for spanstats
* fluids: Correct qdata creation for strong bcs
* fluids: Set tensor closer only for tensor-product elements
Co-authored-by: Jeremy L Thompson <jeremy@jeremylt.org>
* fluids: Make shocktube test less brittle
- Small, insignificant changes to the coordinate locations make a
dramatic difference to the initial condition
- For the test case, there is a node right at the midpoint of the
domain. Adding the epsilon fudge factor makes the if statement more
stable
* fluids: Fix SGS test
- Change the test so that it passes on all hardware. It's a very
sentitive test and the changes to the basis creation changed the
initial conditions *just* enough to make the test not happy. Should
really try and make this more robust at some point...
* fluids: Address misc PR comments
* fluids: Remove quad_mode arg from CreateBasisFromPlex
---------
Co-authored-by: James Wright <james@jameswright.xyz>
Co-authored-by: Jeremy L Thompson <jeremy@jeremylt.org>
|
| H A D | navierstokes.c | 0814d5a7c7108099a9a6106ea0d2f7f6b264fad8 Wed Aug 02 16:40:58 UTC 2023 Kenneth E. Jansen <Kenneth.Jansen@colorado.edu> PetscFE determines basis for examples/fluids/navierstokes (#1264)
* breaking lots of DL stuff to test PetscFE
* fixed missing header
* fluids: Remove unused `Involute` function
* fluids: Set quadrature points for PetscFE
* fluids: Fix GetRestrictionForDomain, Use CreateBasisFromPlex
* fluids: Remove Q_sur arg from SetupStrongBC_Ceed
* fluids: Remove extra SetClosurePermutationTensor
* fluids: Correct quadrature order to auxillary DMs
- Should factor in q_extra
* fluids: Fix parent Restriction creation for spanstats
* fluids: Correct qdata creation for strong bcs
* fluids: Set tensor closer only for tensor-product elements
Co-authored-by: Jeremy L Thompson <jeremy@jeremylt.org>
* fluids: Make shocktube test less brittle
- Small, insignificant changes to the coordinate locations make a
dramatic difference to the initial condition
- For the test case, there is a node right at the midpoint of the
domain. Adding the epsilon fudge factor makes the if statement more
stable
* fluids: Fix SGS test
- Change the test so that it passes on all hardware. It's a very
sentitive test and the changes to the basis creation changed the
initial conditions *just* enough to make the test not happy. Should
really try and make this more robust at some point...
* fluids: Address misc PR comments
* fluids: Remove quad_mode arg from CreateBasisFromPlex
---------
Co-authored-by: James Wright <james@jameswright.xyz>
Co-authored-by: Jeremy L Thompson <jeremy@jeremylt.org>
|