1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * DRM driver for Ilitek ILI9225 panels
4 *
5 * Copyright 2017 David Lechner <david@lechnology.com>
6 *
7 * Some code copied from mipi-dbi.c
8 * Copyright 2016 Noralf Trønnes
9 */
10
11 #include <linux/delay.h>
12 #include <linux/dma-buf.h>
13 #include <linux/gpio/consumer.h>
14 #include <linux/module.h>
15 #include <linux/property.h>
16 #include <linux/spi/spi.h>
17 #include <video/mipi_display.h>
18
19 #include <drm/clients/drm_client_setup.h>
20 #include <drm/drm_atomic.h>
21 #include <drm/drm_atomic_helper.h>
22 #include <drm/drm_damage_helper.h>
23 #include <drm/drm_drv.h>
24 #include <drm/drm_fb_dma_helper.h>
25 #include <drm/drm_fbdev_dma.h>
26 #include <drm/drm_fourcc.h>
27 #include <drm/drm_framebuffer.h>
28 #include <drm/drm_gem_dma_helper.h>
29 #include <drm/drm_managed.h>
30 #include <drm/drm_mipi_dbi.h>
31 #include <drm/drm_print.h>
32 #include <drm/drm_rect.h>
33
34 #define ILI9225_DRIVER_READ_CODE 0x00
35 #define ILI9225_DRIVER_OUTPUT_CONTROL 0x01
36 #define ILI9225_LCD_AC_DRIVING_CONTROL 0x02
37 #define ILI9225_ENTRY_MODE 0x03
38 #define ILI9225_DISPLAY_CONTROL_1 0x07
39 #define ILI9225_BLANK_PERIOD_CONTROL_1 0x08
40 #define ILI9225_FRAME_CYCLE_CONTROL 0x0b
41 #define ILI9225_INTERFACE_CONTROL 0x0c
42 #define ILI9225_OSCILLATION_CONTROL 0x0f
43 #define ILI9225_POWER_CONTROL_1 0x10
44 #define ILI9225_POWER_CONTROL_2 0x11
45 #define ILI9225_POWER_CONTROL_3 0x12
46 #define ILI9225_POWER_CONTROL_4 0x13
47 #define ILI9225_POWER_CONTROL_5 0x14
48 #define ILI9225_VCI_RECYCLING 0x15
49 #define ILI9225_RAM_ADDRESS_SET_1 0x20
50 #define ILI9225_RAM_ADDRESS_SET_2 0x21
51 #define ILI9225_WRITE_DATA_TO_GRAM 0x22
52 #define ILI9225_SOFTWARE_RESET 0x28
53 #define ILI9225_GATE_SCAN_CONTROL 0x30
54 #define ILI9225_VERTICAL_SCROLL_1 0x31
55 #define ILI9225_VERTICAL_SCROLL_2 0x32
56 #define ILI9225_VERTICAL_SCROLL_3 0x33
57 #define ILI9225_PARTIAL_DRIVING_POS_1 0x34
58 #define ILI9225_PARTIAL_DRIVING_POS_2 0x35
59 #define ILI9225_HORIZ_WINDOW_ADDR_1 0x36
60 #define ILI9225_HORIZ_WINDOW_ADDR_2 0x37
61 #define ILI9225_VERT_WINDOW_ADDR_1 0x38
62 #define ILI9225_VERT_WINDOW_ADDR_2 0x39
63 #define ILI9225_GAMMA_CONTROL_1 0x50
64 #define ILI9225_GAMMA_CONTROL_2 0x51
65 #define ILI9225_GAMMA_CONTROL_3 0x52
66 #define ILI9225_GAMMA_CONTROL_4 0x53
67 #define ILI9225_GAMMA_CONTROL_5 0x54
68 #define ILI9225_GAMMA_CONTROL_6 0x55
69 #define ILI9225_GAMMA_CONTROL_7 0x56
70 #define ILI9225_GAMMA_CONTROL_8 0x57
71 #define ILI9225_GAMMA_CONTROL_9 0x58
72 #define ILI9225_GAMMA_CONTROL_10 0x59
73
74 struct ili9225_device {
75 struct mipi_dbi_dev dbidev;
76
77 struct drm_plane plane;
78 struct drm_crtc crtc;
79 struct drm_encoder encoder;
80 struct drm_connector connector;
81 };
82
to_ili9225_device(struct drm_device * dev)83 static struct ili9225_device *to_ili9225_device(struct drm_device *dev)
84 {
85 return container_of(drm_to_mipi_dbi_dev(dev), struct ili9225_device, dbidev);
86 }
87
ili9225_command(struct mipi_dbi * dbi,u8 cmd,u16 data)88 static inline int ili9225_command(struct mipi_dbi *dbi, u8 cmd, u16 data)
89 {
90 u8 par[2] = { data >> 8, data & 0xff };
91
92 return mipi_dbi_command_buf(dbi, cmd, par, 2);
93 }
94
ili9225_fb_dirty(struct iosys_map * src,struct drm_framebuffer * fb,struct drm_rect * rect,struct drm_format_conv_state * fmtcnv_state)95 static void ili9225_fb_dirty(struct iosys_map *src, struct drm_framebuffer *fb,
96 struct drm_rect *rect, struct drm_format_conv_state *fmtcnv_state)
97 {
98 struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(fb->dev);
99 unsigned int height = rect->y2 - rect->y1;
100 unsigned int width = rect->x2 - rect->x1;
101 struct mipi_dbi *dbi = &dbidev->dbi;
102 bool swap = dbi->swap_bytes;
103 u16 x_start, y_start;
104 u16 x1, x2, y1, y2;
105 int ret = 0;
106 bool full;
107 void *tr;
108
109 full = width == fb->width && height == fb->height;
110
111 DRM_DEBUG_KMS("Flushing [FB:%d] " DRM_RECT_FMT "\n", fb->base.id, DRM_RECT_ARG(rect));
112
113 if (!dbi->dc || !full || swap ||
114 fb->format->format == DRM_FORMAT_XRGB8888) {
115 tr = dbidev->tx_buf;
116 ret = mipi_dbi_buf_copy(tr, src, fb, rect, swap, fmtcnv_state);
117 if (ret)
118 goto err_msg;
119 } else {
120 tr = src->vaddr; /* TODO: Use mapping abstraction properly */
121 }
122
123 switch (dbidev->rotation) {
124 default:
125 x1 = rect->x1;
126 x2 = rect->x2 - 1;
127 y1 = rect->y1;
128 y2 = rect->y2 - 1;
129 x_start = x1;
130 y_start = y1;
131 break;
132 case 90:
133 x1 = rect->y1;
134 x2 = rect->y2 - 1;
135 y1 = fb->width - rect->x2;
136 y2 = fb->width - rect->x1 - 1;
137 x_start = x1;
138 y_start = y2;
139 break;
140 case 180:
141 x1 = fb->width - rect->x2;
142 x2 = fb->width - rect->x1 - 1;
143 y1 = fb->height - rect->y2;
144 y2 = fb->height - rect->y1 - 1;
145 x_start = x2;
146 y_start = y2;
147 break;
148 case 270:
149 x1 = fb->height - rect->y2;
150 x2 = fb->height - rect->y1 - 1;
151 y1 = rect->x1;
152 y2 = rect->x2 - 1;
153 x_start = x2;
154 y_start = y1;
155 break;
156 }
157
158 ili9225_command(dbi, ILI9225_HORIZ_WINDOW_ADDR_1, x2);
159 ili9225_command(dbi, ILI9225_HORIZ_WINDOW_ADDR_2, x1);
160 ili9225_command(dbi, ILI9225_VERT_WINDOW_ADDR_1, y2);
161 ili9225_command(dbi, ILI9225_VERT_WINDOW_ADDR_2, y1);
162
163 ili9225_command(dbi, ILI9225_RAM_ADDRESS_SET_1, x_start);
164 ili9225_command(dbi, ILI9225_RAM_ADDRESS_SET_2, y_start);
165
166 ret = mipi_dbi_command_buf(dbi, ILI9225_WRITE_DATA_TO_GRAM, tr,
167 width * height * 2);
168 err_msg:
169 if (ret)
170 dev_err_once(fb->dev->dev, "Failed to update display %d\n", ret);
171 }
172
173 static const u32 ili9225_plane_formats[] = {
174 DRM_MIPI_DBI_PLANE_FORMATS,
175 };
176
177 static const u64 ili9225_plane_format_modifiers[] = {
178 DRM_MIPI_DBI_PLANE_FORMAT_MODIFIERS,
179 };
180
ili9225_plane_helper_atomic_update(struct drm_plane * plane,struct drm_atomic_state * state)181 static void ili9225_plane_helper_atomic_update(struct drm_plane *plane,
182 struct drm_atomic_state *state)
183 {
184 struct drm_device *drm = plane->dev;
185 struct drm_plane_state *plane_state = plane->state;
186 struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state);
187 struct drm_framebuffer *fb = plane_state->fb;
188 struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state, plane);
189 struct drm_rect rect;
190 int idx;
191
192 if (!plane_state->fb)
193 return;
194
195 if (!drm_dev_enter(drm, &idx))
196 return;
197
198 if (drm_atomic_helper_damage_merged(old_plane_state, plane_state, &rect))
199 ili9225_fb_dirty(&shadow_plane_state->data[0], fb, &rect,
200 &shadow_plane_state->fmtcnv_state);
201
202 drm_dev_exit(idx);
203 }
204
205 static const struct drm_plane_helper_funcs ili9225_plane_helper_funcs = {
206 DRM_GEM_SHADOW_PLANE_HELPER_FUNCS,
207 .atomic_check = drm_mipi_dbi_plane_helper_atomic_check,
208 .atomic_update = ili9225_plane_helper_atomic_update,
209 };
210
211 static const struct drm_plane_funcs ili9225_plane_funcs = {
212 DRM_MIPI_DBI_PLANE_FUNCS,
213 .destroy = drm_plane_cleanup,
214 };
215
ili9225_crtc_helper_atomic_enable(struct drm_crtc * crtc,struct drm_atomic_state * state)216 static void ili9225_crtc_helper_atomic_enable(struct drm_crtc *crtc,
217 struct drm_atomic_state *state)
218 {
219 struct drm_device *drm = crtc->dev;
220 struct ili9225_device *ili9225 = to_ili9225_device(drm);
221 struct mipi_dbi_dev *dbidev = &ili9225->dbidev;
222 struct device *dev = drm->dev;
223 struct mipi_dbi *dbi = &dbidev->dbi;
224 int ret, idx;
225 u8 am_id;
226
227 if (!drm_dev_enter(drm, &idx))
228 return;
229
230 DRM_DEBUG_KMS("\n");
231
232 mipi_dbi_hw_reset(dbi);
233
234 /*
235 * There don't seem to be two example init sequences that match, so
236 * using the one from the popular Arduino library for this display.
237 * https://github.com/Nkawu/TFT_22_ILI9225/blob/master/src/TFT_22_ILI9225.cpp
238 */
239
240 ret = ili9225_command(dbi, ILI9225_POWER_CONTROL_1, 0x0000);
241 if (ret) {
242 DRM_DEV_ERROR(dev, "Error sending command %d\n", ret);
243 goto out_exit;
244 }
245 ili9225_command(dbi, ILI9225_POWER_CONTROL_2, 0x0000);
246 ili9225_command(dbi, ILI9225_POWER_CONTROL_3, 0x0000);
247 ili9225_command(dbi, ILI9225_POWER_CONTROL_4, 0x0000);
248 ili9225_command(dbi, ILI9225_POWER_CONTROL_5, 0x0000);
249
250 msleep(40);
251
252 ili9225_command(dbi, ILI9225_POWER_CONTROL_2, 0x0018);
253 ili9225_command(dbi, ILI9225_POWER_CONTROL_3, 0x6121);
254 ili9225_command(dbi, ILI9225_POWER_CONTROL_4, 0x006f);
255 ili9225_command(dbi, ILI9225_POWER_CONTROL_5, 0x495f);
256 ili9225_command(dbi, ILI9225_POWER_CONTROL_1, 0x0800);
257
258 msleep(10);
259
260 ili9225_command(dbi, ILI9225_POWER_CONTROL_2, 0x103b);
261
262 msleep(50);
263
264 switch (dbidev->rotation) {
265 default:
266 am_id = 0x30;
267 break;
268 case 90:
269 am_id = 0x18;
270 break;
271 case 180:
272 am_id = 0x00;
273 break;
274 case 270:
275 am_id = 0x28;
276 break;
277 }
278 ili9225_command(dbi, ILI9225_DRIVER_OUTPUT_CONTROL, 0x011c);
279 ili9225_command(dbi, ILI9225_LCD_AC_DRIVING_CONTROL, 0x0100);
280 ili9225_command(dbi, ILI9225_ENTRY_MODE, 0x1000 | am_id);
281 ili9225_command(dbi, ILI9225_DISPLAY_CONTROL_1, 0x0000);
282 ili9225_command(dbi, ILI9225_BLANK_PERIOD_CONTROL_1, 0x0808);
283 ili9225_command(dbi, ILI9225_FRAME_CYCLE_CONTROL, 0x1100);
284 ili9225_command(dbi, ILI9225_INTERFACE_CONTROL, 0x0000);
285 ili9225_command(dbi, ILI9225_OSCILLATION_CONTROL, 0x0d01);
286 ili9225_command(dbi, ILI9225_VCI_RECYCLING, 0x0020);
287 ili9225_command(dbi, ILI9225_RAM_ADDRESS_SET_1, 0x0000);
288 ili9225_command(dbi, ILI9225_RAM_ADDRESS_SET_2, 0x0000);
289
290 ili9225_command(dbi, ILI9225_GATE_SCAN_CONTROL, 0x0000);
291 ili9225_command(dbi, ILI9225_VERTICAL_SCROLL_1, 0x00db);
292 ili9225_command(dbi, ILI9225_VERTICAL_SCROLL_2, 0x0000);
293 ili9225_command(dbi, ILI9225_VERTICAL_SCROLL_3, 0x0000);
294 ili9225_command(dbi, ILI9225_PARTIAL_DRIVING_POS_1, 0x00db);
295 ili9225_command(dbi, ILI9225_PARTIAL_DRIVING_POS_2, 0x0000);
296
297 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_1, 0x0000);
298 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_2, 0x0808);
299 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_3, 0x080a);
300 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_4, 0x000a);
301 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_5, 0x0a08);
302 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_6, 0x0808);
303 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_7, 0x0000);
304 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_8, 0x0a00);
305 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_9, 0x0710);
306 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_10, 0x0710);
307
308 ili9225_command(dbi, ILI9225_DISPLAY_CONTROL_1, 0x0012);
309
310 msleep(50);
311
312 ili9225_command(dbi, ILI9225_DISPLAY_CONTROL_1, 0x1017);
313
314 out_exit:
315 drm_dev_exit(idx);
316 }
317
ili9225_crtc_helper_atomic_disable(struct drm_crtc * crtc,struct drm_atomic_state * state)318 static void ili9225_crtc_helper_atomic_disable(struct drm_crtc *crtc,
319 struct drm_atomic_state *state)
320 {
321 struct drm_device *drm = crtc->dev;
322 struct ili9225_device *ili9225 = to_ili9225_device(drm);
323 struct mipi_dbi_dev *dbidev = &ili9225->dbidev;
324 struct mipi_dbi *dbi = &dbidev->dbi;
325
326 DRM_DEBUG_KMS("\n");
327
328 /*
329 * This callback is not protected by drm_dev_enter/exit since we want to
330 * turn off the display on regular driver unload. It's highly unlikely
331 * that the underlying SPI controller is gone should this be called after
332 * unplug.
333 */
334
335 ili9225_command(dbi, ILI9225_DISPLAY_CONTROL_1, 0x0000);
336 msleep(50);
337 ili9225_command(dbi, ILI9225_POWER_CONTROL_2, 0x0007);
338 msleep(50);
339 ili9225_command(dbi, ILI9225_POWER_CONTROL_1, 0x0a02);
340 }
341
342 static const struct drm_crtc_helper_funcs ili9225_crtc_helper_funcs = {
343 .mode_valid = drm_mipi_dbi_crtc_helper_mode_valid,
344 .atomic_check = drm_mipi_dbi_crtc_helper_atomic_check,
345 .atomic_enable = ili9225_crtc_helper_atomic_enable,
346 .atomic_disable = ili9225_crtc_helper_atomic_disable,
347 };
348
349 static const struct drm_crtc_funcs ili9225_crtc_funcs = {
350 DRM_MIPI_DBI_CRTC_FUNCS,
351 .destroy = drm_crtc_cleanup,
352 };
353
354 static const struct drm_encoder_funcs ili9225_encoder_funcs = {
355 .destroy = drm_encoder_cleanup,
356 };
357
358 static const struct drm_connector_helper_funcs ili9225_connector_helper_funcs = {
359 DRM_MIPI_DBI_CONNECTOR_HELPER_FUNCS,
360 };
361
362 static const struct drm_connector_funcs ili9225_connector_funcs = {
363 DRM_MIPI_DBI_CONNECTOR_FUNCS,
364 .destroy = drm_connector_cleanup,
365 };
366
367 static const struct drm_mode_config_helper_funcs ili9225_mode_config_helper_funcs = {
368 DRM_MIPI_DBI_MODE_CONFIG_HELPER_FUNCS,
369 };
370
371 static const struct drm_mode_config_funcs ili9225_mode_config_funcs = {
372 DRM_MIPI_DBI_MODE_CONFIG_FUNCS,
373 };
374
ili9225_dbi_command(struct mipi_dbi * dbi,u8 * cmd,u8 * par,size_t num)375 static int ili9225_dbi_command(struct mipi_dbi *dbi, u8 *cmd, u8 *par,
376 size_t num)
377 {
378 struct spi_device *spi = dbi->spi;
379 unsigned int bpw = 8;
380 u32 speed_hz;
381 int ret;
382
383 spi_bus_lock(spi->controller);
384 gpiod_set_value_cansleep(dbi->dc, 0);
385 speed_hz = mipi_dbi_spi_cmd_max_speed(spi, 1);
386 ret = mipi_dbi_spi_transfer(spi, speed_hz, 8, cmd, 1);
387 spi_bus_unlock(spi->controller);
388 if (ret || !num)
389 return ret;
390
391 if (*cmd == ILI9225_WRITE_DATA_TO_GRAM && !dbi->swap_bytes)
392 bpw = 16;
393
394 spi_bus_lock(spi->controller);
395 gpiod_set_value_cansleep(dbi->dc, 1);
396 speed_hz = mipi_dbi_spi_cmd_max_speed(spi, num);
397 ret = mipi_dbi_spi_transfer(spi, speed_hz, bpw, par, num);
398 spi_bus_unlock(spi->controller);
399
400 return ret;
401 }
402
403 static const struct drm_display_mode ili9225_mode = {
404 DRM_SIMPLE_MODE(176, 220, 35, 44),
405 };
406
407 DEFINE_DRM_GEM_DMA_FOPS(ili9225_fops);
408
409 static const struct drm_driver ili9225_driver = {
410 .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
411 .fops = &ili9225_fops,
412 DRM_GEM_DMA_DRIVER_OPS_VMAP,
413 DRM_FBDEV_DMA_DRIVER_OPS,
414 .name = "ili9225",
415 .desc = "Ilitek ILI9225",
416 .major = 1,
417 .minor = 0,
418 };
419
420 static const struct of_device_id ili9225_of_match[] = {
421 { .compatible = "vot,v220hf01a-t" },
422 {},
423 };
424 MODULE_DEVICE_TABLE(of, ili9225_of_match);
425
426 static const struct spi_device_id ili9225_id[] = {
427 { "v220hf01a-t", 0 },
428 { },
429 };
430 MODULE_DEVICE_TABLE(spi, ili9225_id);
431
ili9225_probe(struct spi_device * spi)432 static int ili9225_probe(struct spi_device *spi)
433 {
434 struct device *dev = &spi->dev;
435 struct ili9225_device *ili9225;
436 struct mipi_dbi_dev *dbidev;
437 struct drm_device *drm;
438 struct mipi_dbi *dbi;
439 struct gpio_desc *rs;
440 struct drm_plane *plane;
441 struct drm_crtc *crtc;
442 struct drm_encoder *encoder;
443 struct drm_connector *connector;
444 u32 rotation = 0;
445 int ret;
446
447 ili9225 = devm_drm_dev_alloc(dev, &ili9225_driver, struct ili9225_device, dbidev.drm);
448 if (IS_ERR(ili9225))
449 return PTR_ERR(ili9225);
450 dbidev = &ili9225->dbidev;
451 dbi = &dbidev->dbi;
452 drm = &dbidev->drm;
453
454 dbi->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
455 if (IS_ERR(dbi->reset))
456 return dev_err_probe(dev, PTR_ERR(dbi->reset), "Failed to get GPIO 'reset'\n");
457
458 rs = devm_gpiod_get(dev, "rs", GPIOD_OUT_LOW);
459 if (IS_ERR(rs))
460 return dev_err_probe(dev, PTR_ERR(rs), "Failed to get GPIO 'rs'\n");
461
462 device_property_read_u32(dev, "rotation", &rotation);
463
464 ret = mipi_dbi_spi_init(spi, dbi, rs);
465 if (ret)
466 return ret;
467
468 /* override the command function set in mipi_dbi_spi_init() */
469 dbi->command = ili9225_dbi_command;
470
471 ret = drm_mipi_dbi_dev_init(dbidev, &ili9225_mode, ili9225_plane_formats[0],
472 rotation, 0);
473 if (ret)
474 return ret;
475
476 ret = drmm_mode_config_init(drm);
477 if (ret)
478 return ret;
479
480 drm->mode_config.min_width = dbidev->mode.hdisplay;
481 drm->mode_config.max_width = dbidev->mode.hdisplay;
482 drm->mode_config.min_height = dbidev->mode.vdisplay;
483 drm->mode_config.max_height = dbidev->mode.vdisplay;
484 drm->mode_config.funcs = &ili9225_mode_config_funcs;
485 drm->mode_config.preferred_depth = 16;
486 drm->mode_config.helper_private = &ili9225_mode_config_helper_funcs;
487
488 plane = &ili9225->plane;
489 ret = drm_universal_plane_init(drm, plane, 0, &ili9225_plane_funcs,
490 ili9225_plane_formats, ARRAY_SIZE(ili9225_plane_formats),
491 ili9225_plane_format_modifiers,
492 DRM_PLANE_TYPE_PRIMARY, NULL);
493 if (ret)
494 return ret;
495 drm_plane_helper_add(plane, &ili9225_plane_helper_funcs);
496 drm_plane_enable_fb_damage_clips(plane);
497
498 crtc = &ili9225->crtc;
499 ret = drm_crtc_init_with_planes(drm, crtc, plane, NULL, &ili9225_crtc_funcs, NULL);
500 if (ret)
501 return ret;
502 drm_crtc_helper_add(crtc, &ili9225_crtc_helper_funcs);
503
504 encoder = &ili9225->encoder;
505 ret = drm_encoder_init(drm, encoder, &ili9225_encoder_funcs, DRM_MODE_ENCODER_NONE, NULL);
506 if (ret)
507 return ret;
508 encoder->possible_crtcs = drm_crtc_mask(crtc);
509
510 connector = &ili9225->connector;
511 ret = drm_connector_init(drm, connector, &ili9225_connector_funcs,
512 DRM_MODE_CONNECTOR_SPI);
513 if (ret)
514 return ret;
515 drm_connector_helper_add(connector, &ili9225_connector_helper_funcs);
516
517 ret = drm_connector_attach_encoder(connector, encoder);
518 if (ret)
519 return ret;
520
521 drm_mode_config_reset(drm);
522
523 ret = drm_dev_register(drm, 0);
524 if (ret)
525 return ret;
526
527 spi_set_drvdata(spi, drm);
528
529 drm_client_setup(drm, NULL);
530
531 return 0;
532 }
533
ili9225_remove(struct spi_device * spi)534 static void ili9225_remove(struct spi_device *spi)
535 {
536 struct drm_device *drm = spi_get_drvdata(spi);
537
538 drm_dev_unplug(drm);
539 drm_atomic_helper_shutdown(drm);
540 }
541
ili9225_shutdown(struct spi_device * spi)542 static void ili9225_shutdown(struct spi_device *spi)
543 {
544 drm_atomic_helper_shutdown(spi_get_drvdata(spi));
545 }
546
547 static struct spi_driver ili9225_spi_driver = {
548 .driver = {
549 .name = "ili9225",
550 .of_match_table = ili9225_of_match,
551 },
552 .id_table = ili9225_id,
553 .probe = ili9225_probe,
554 .remove = ili9225_remove,
555 .shutdown = ili9225_shutdown,
556 };
557 module_spi_driver(ili9225_spi_driver);
558
559 MODULE_DESCRIPTION("Ilitek ILI9225 DRM driver");
560 MODULE_AUTHOR("David Lechner <david@lechnology.com>");
561 MODULE_LICENSE("GPL");
562