xref: /libCEED/examples/fluids/qfunctions/stg_shur14.h (revision 89060322c13980ed8451c7b618ee26076f8c9489)

// Copyright (c) 2017-2022, Lawrence Livermore National Security, LLC and other CEED contributors.
// All Rights Reserved. See the top-level LICENSE and NOTICE files for details.
//
// SPDX-License-Identifier: BSD-2-Clause
//
// This file is part of CEED:  http://github.com/ceed

/// @file
/// Implementation of the Synthetic Turbulence Generation (STG) algorithm
/// presented in Shur et al. 2014
//
/// SetupSTG_Rand reads in the input files and fills in STGShur14Context. Then
/// STGShur14_CalcQF is run over quadrature points. Before the program exits,
/// TearDownSTG is run to free the memory of the allocated arrays.

#ifndef stg_shur14_h
#define stg_shur14_h

#include <ceed.h>
#include <math.h>
#include <stdlib.h>
#include "stg_shur14_type.h"
#include "utils.h"

#define STG_NMODES_MAX 1024

/*
 * @brief Interpolate quantities from input profile to given location
 *
 * Assumed that prof_wd[i+1] > prof_wd[i] and prof_wd[0] = 0
 * If wall_dist > prof_wd[-1], then the interpolation takes the values at prof_wd[-1]
 *
 * @param[in]  wall_dist Distance to the nearest wall
 * @param[out] ubar      Mean velocity at wall_dist
 * @param[out] cij       Cholesky decomposition at wall_dist
 * @param[out] eps       Turbulent dissipation at wall_dist
 * @param[out] lt        Turbulent length scale at wall_dist
 * @param[in]  stg_ctx   STGShur14Context for the problem
 */
CEED_QFUNCTION_HELPER void InterpolateProfile(const CeedScalar wall_dist,
    CeedScalar ubar[3], CeedScalar cij[6], CeedScalar *eps, CeedScalar *lt,
    const STGShur14Context stg_ctx) {

  const CeedInt    nprofs     = stg_ctx->nprofs;
  const CeedScalar *prof_wd   = &stg_ctx->data[stg_ctx->offsets.wall_dist];
  const CeedScalar *prof_eps  = &stg_ctx->data[stg_ctx->offsets.eps];
  const CeedScalar *prof_lt   = &stg_ctx->data[stg_ctx->offsets.lt];
  const CeedScalar *prof_ubar = &stg_ctx->data[stg_ctx->offsets.ubar];
  const CeedScalar *prof_cij  = &stg_ctx->data[stg_ctx->offsets.cij];
  CeedInt idx=-1;

  for(CeedInt i=0; i<nprofs; i++) {
    if (wall_dist < prof_wd[i]) {
      idx = i;
      break;
    }
  }

  if (idx > 0) { // y within the bounds of prof_wd
    //*INDENT-OFF*
    CeedScalar coeff = (wall_dist - prof_wd[idx-1]) / (prof_wd[idx] - prof_wd[idx -1]);

    ubar[0] = prof_ubar[0*nprofs+idx-1] + coeff*( prof_ubar[0*nprofs+idx] - prof_ubar[0*nprofs+idx-1] );
    ubar[1] = prof_ubar[1*nprofs+idx-1] + coeff*( prof_ubar[1*nprofs+idx] - prof_ubar[1*nprofs+idx-1] );
    ubar[2] = prof_ubar[2*nprofs+idx-1] + coeff*( prof_ubar[2*nprofs+idx] - prof_ubar[2*nprofs+idx-1] );
    cij[0]  = prof_cij[0*nprofs+idx-1]  + coeff*( prof_cij[0*nprofs+idx]  - prof_cij[0*nprofs+idx-1] );
    cij[1]  = prof_cij[1*nprofs+idx-1]  + coeff*( prof_cij[1*nprofs+idx]  - prof_cij[1*nprofs+idx-1] );
    cij[2]  = prof_cij[2*nprofs+idx-1]  + coeff*( prof_cij[2*nprofs+idx]  - prof_cij[2*nprofs+idx-1] );
    cij[3]  = prof_cij[3*nprofs+idx-1]  + coeff*( prof_cij[3*nprofs+idx]  - prof_cij[3*nprofs+idx-1] );
    cij[4]  = prof_cij[4*nprofs+idx-1]  + coeff*( prof_cij[4*nprofs+idx]  - prof_cij[4*nprofs+idx-1] );
    cij[5]  = prof_cij[5*nprofs+idx-1]  + coeff*( prof_cij[5*nprofs+idx]  - prof_cij[5*nprofs+idx-1] );
    *eps    = prof_eps[idx-1]           + coeff*( prof_eps[idx]           - prof_eps[idx-1] );
    *lt     = prof_lt[idx-1]            + coeff*( prof_lt[idx]            - prof_lt[idx-1] );
    //*INDENT-ON*
  } else { // y outside bounds of prof_wd
    ubar[0] = prof_ubar[1*nprofs-1];
    ubar[1] = prof_ubar[2*nprofs-1];
    ubar[2] = prof_ubar[3*nprofs-1];
    cij[0]  = prof_cij[1*nprofs-1];
    cij[1]  = prof_cij[2*nprofs-1];
    cij[2]  = prof_cij[3*nprofs-1];
    cij[3]  = prof_cij[4*nprofs-1];
    cij[4]  = prof_cij[5*nprofs-1];
    cij[5]  = prof_cij[6*nprofs-1];
    *eps    = prof_eps[nprofs-1];
    *lt     = prof_lt[nprofs-1];
  }
}

/*
 * @brief Calculate spectrum coefficient, qn
 *
 * Calculates q_n at a given distance to the wall
 *
 * @param[in]  kappa  nth wavenumber
 * @param[in]  dkappa Difference between wavenumbers
 * @param[in]  keta   Dissipation wavenumber
 * @param[in]  kcut   Mesh-induced cutoff wavenumber
 * @param[in]  ke     Energy-containing wavenumber
 * @param[in]  Ektot  Total turbulent kinetic energy of spectrum
 * @returns    qn     Spectrum coefficient
 */
CeedScalar CEED_QFUNCTION_HELPER(Calc_qn)(const CeedScalar kappa,
    const CeedScalar dkappa, const CeedScalar keta, const CeedScalar kcut,
    const CeedScalar ke, const CeedScalar Ektot_inv) {
  const CeedScalar feta_x_fcut   = exp(-Square(12*kappa/keta)
                                       -Cube(4*Max(kappa - 0.9*kcut, 0)/kcut) );
  return pow(kappa/ke, 4.) * pow(1 + 2.4*Square(kappa/ke),-17./6)
         *feta_x_fcut*dkappa * Ektot_inv;
}

// Calculate hmax, ke, keta, and kcut
void CEED_QFUNCTION_HELPER(SpectrumConstants)(const CeedScalar wall_dist,
    const CeedScalar eps, const CeedScalar lt, const CeedScalar h[3],
    const CeedScalar nu, CeedScalar *hmax, CeedScalar *ke,
    CeedScalar *keta, CeedScalar *kcut) {
  *hmax = Max( Max(h[0], h[1]), h[2]);
  *ke   = wall_dist==0 ? 1e16 : 2*M_PI/Min(2*wall_dist, 3*lt);
  *keta = 2*M_PI*pow(Cube(nu)/eps, -0.25);
  *kcut = M_PI/ Min( Max(Max(h[1], h[2]), 0.3*(*hmax)) + 0.1*wall_dist, *hmax );
}

/*
 * @brief Calculate spectrum coefficients for STG
 *
 * Calculates q_n at a given distance to the wall
 *
 * @param[in]  wall_dist Distance to the nearest wall
 * @param[in]  eps       Turbulent dissipation w/rt wall_dist
 * @param[in]  lt        Turbulent length scale w/rt wall_dist
 * @param[in]  h         Element lengths in coordinate directions
 * @param[in]  nu        Dynamic Viscosity;
 * @param[in]  stg_ctx   STGShur14Context for the problem
 * @param[out] qn        Spectrum coefficients, [nmodes]
 */
void CEED_QFUNCTION_HELPER(CalcSpectrum)(const CeedScalar wall_dist,
    const CeedScalar eps, const CeedScalar lt, const CeedScalar h[3],
    const CeedScalar nu, CeedScalar qn[], const STGShur14Context stg_ctx) {

  const CeedInt    nmodes = stg_ctx->nmodes;
  const CeedScalar *kappa = &stg_ctx->data[stg_ctx->offsets.kappa];
  CeedScalar hmax, ke, keta, kcut, Ektot=0.0;
  SpectrumConstants(wall_dist, eps, lt, h, nu, &hmax, &ke, &keta, &kcut);

  for(CeedInt n=0; n<nmodes; n++) {
    const CeedScalar dkappa = n==0 ? kappa[0] : kappa[n] - kappa[n-1];
    qn[n] = Calc_qn(kappa[n], dkappa, keta, kcut, ke, 1.0);
    Ektot += qn[n];
  }

  if (Ektot == 0) return;
  for(CeedInt n=0; n<nmodes; n++) qn[n] /= Ektot;
}

/******************************************************
 * @brief Calculate u(x,t) for STG inflow condition
 *
 * @param[in]  X       Location to evaluate u(X,t)
 * @param[in]  t       Time to evaluate u(X,t)
 * @param[in]  ubar    Mean velocity at X
 * @param[in]  cij     Cholesky decomposition at X
 * @param[in]  qn      Wavemode amplitudes at X, [nmodes]
 * @param[out] u       Velocity at X and t
 * @param[in]  stg_ctx STGShur14Context for the problem
 */
void CEED_QFUNCTION_HELPER(STGShur14_Calc)(const CeedScalar X[3],
    const CeedScalar t, const CeedScalar ubar[3], const CeedScalar cij[6],
    const CeedScalar qn[], CeedScalar u[3],
    const STGShur14Context stg_ctx) {

  //*INDENT-OFF*
  const CeedInt    nmodes = stg_ctx->nmodes;
  const CeedScalar *kappa = &stg_ctx->data[stg_ctx->offsets.kappa];
  const CeedScalar *phi   = &stg_ctx->data[stg_ctx->offsets.phi];
  const CeedScalar *sigma = &stg_ctx->data[stg_ctx->offsets.sigma];
  const CeedScalar *d     = &stg_ctx->data[stg_ctx->offsets.d];
  //*INDENT-ON*
  CeedScalar xdotd, vp[3] = {0.};
  CeedScalar xhat[] = {0., X[1], X[2]};

  CeedPragmaSIMD
  for(CeedInt n=0; n<nmodes; n++) {
    xhat[0] = (X[0] - stg_ctx->u0*t)*Max(2*kappa[0]/kappa[n], 0.1);
    xdotd = 0.;
    for(CeedInt i=0; i<3; i++) xdotd += d[i*nmodes+n]*xhat[i];
    const CeedScalar cos_kxdp = cos(kappa[n]*xdotd + phi[n]);
    vp[0] += sqrt(qn[n])*sigma[0*nmodes+n] * cos_kxdp;
    vp[1] += sqrt(qn[n])*sigma[1*nmodes+n] * cos_kxdp;
    vp[2] += sqrt(qn[n])*sigma[2*nmodes+n] * cos_kxdp;
  }
  for(CeedInt i=0; i<3; i++) vp[i] *= 2*sqrt(1.5);

  u[0] = ubar[0] + cij[0]*vp[0];
  u[1] = ubar[1] + cij[3]*vp[0] + cij[1]*vp[1];
  u[2] = ubar[2] + cij[4]*vp[0] + cij[5]*vp[1] + cij[2]*vp[2];
}

/******************************************************
 * @brief Calculate u(x,t) for STG inflow condition
 *
 * @param[in]  X         Location to evaluate u(X,t)
 * @param[in]  t         Time to evaluate u(X,t)
 * @param[in]  ubar      Mean velocity at X
 * @param[in]  cij       Cholesky decomposition at X
 * @param[in]  Ektot     Total spectrum energy at this location
 * @param[in]  h         Element size in 3 directions
 * @param[in]  wall_dist Distance to closest wall
 * @param[in]  eps       Turbulent dissipation
 * @param[in]  lt        Turbulent length scale
 * @param[out] u         Velocity at X and t
 * @param[in]  stg_ctx   STGShur14Context for the problem
 */
void CEED_QFUNCTION_HELPER(STGShur14_Calc_PrecompEktot)(const CeedScalar X[3],
    const CeedScalar t, const CeedScalar ubar[3], const CeedScalar cij[6],
    const CeedScalar Ektot, const CeedScalar h[3], const CeedScalar wall_dist,
    const CeedScalar eps, const CeedScalar lt, const CeedScalar nu, CeedScalar u[3],
    const STGShur14Context stg_ctx) {

  //*INDENT-OFF*
  const CeedInt    nmodes = stg_ctx->nmodes;
  const CeedScalar *kappa = &stg_ctx->data[stg_ctx->offsets.kappa];
  const CeedScalar *phi   = &stg_ctx->data[stg_ctx->offsets.phi];
  const CeedScalar *sigma = &stg_ctx->data[stg_ctx->offsets.sigma];
  const CeedScalar *d     = &stg_ctx->data[stg_ctx->offsets.d];
  //*INDENT-ON*
  CeedScalar hmax, ke, keta, kcut;
  SpectrumConstants(wall_dist, eps, lt, h, nu, &hmax, &ke, &keta, &kcut);
  CeedScalar xdotd, vp[3] = {0.};
  CeedScalar xhat[] = {0., X[1], X[2]};

  CeedPragmaSIMD
  for(CeedInt n=0; n<nmodes; n++) {
    xhat[0] = (X[0] - stg_ctx->u0*t)*Max(2*kappa[0]/kappa[n], 0.1);
    xdotd = 0.;
    for(CeedInt i=0; i<3; i++) xdotd += d[i*nmodes+n]*xhat[i];
    const CeedScalar cos_kxdp = cos(kappa[n]*xdotd + phi[n]);
    const CeedScalar dkappa   = n==0 ? kappa[0] : kappa[n] - kappa[n-1];
    const CeedScalar qn       = Calc_qn(kappa[n], dkappa, keta, kcut, ke, Ektot);
    vp[0] += sqrt(qn)*sigma[0*nmodes+n] * cos_kxdp;
    vp[1] += sqrt(qn)*sigma[1*nmodes+n] * cos_kxdp;
    vp[2] += sqrt(qn)*sigma[2*nmodes+n] * cos_kxdp;
  }
  for(CeedInt i=0; i<3; i++) vp[i] *= 2*sqrt(1.5);

  u[0] = ubar[0] + cij[0]*vp[0];
  u[1] = ubar[1] + cij[3]*vp[0] + cij[1]*vp[1];
  u[2] = ubar[2] + cij[4]*vp[0] + cij[5]*vp[1] + cij[2]*vp[2];
}

// Create preprocessed input for the stg calculation
//
// stg_data[0] = 1 / Ektot (inverse of total spectrum energy)
CEED_QFUNCTION(Preprocess_STGShur14)(void *ctx, CeedInt Q,
                                     const CeedScalar *const *in, CeedScalar *const *out) {
  //*INDENT-OFF*
  const CeedScalar (*q_data_sur)[CEED_Q_VLA] = (const CeedScalar(*)[CEED_Q_VLA]) in[0],
                   (*x)[CEED_Q_VLA]          = (const CeedScalar(*)[CEED_Q_VLA]) in[1];

  CeedScalar (*stg_data) = (CeedScalar(*)) out[0];

  //*INDENT-ON*
  CeedScalar ubar[3], cij[6], eps, lt;
  const STGShur14Context stg_ctx = (STGShur14Context) ctx;
  const CeedScalar dx     = stg_ctx->dx;
  const CeedScalar mu     = stg_ctx->newtonian_ctx.mu;
  const CeedScalar theta0 = stg_ctx->theta0;
  const CeedScalar P0     = stg_ctx->P0;
  const CeedScalar cv     = stg_ctx->newtonian_ctx.cv;
  const CeedScalar cp     = stg_ctx->newtonian_ctx.cp;
  const CeedScalar Rd     = cp - cv;
  const CeedScalar rho    = P0 / (Rd * theta0);
  const CeedScalar nu     = mu / rho;

  const CeedInt    nmodes = stg_ctx->nmodes;
  const CeedScalar *kappa = &stg_ctx->data[stg_ctx->offsets.kappa];
  CeedScalar hmax, ke, keta, kcut;

  CeedPragmaSIMD
  for(CeedInt i=0; i<Q; i++) {
    const CeedScalar wall_dist = x[1][i];
    const CeedScalar dXdx[2][3] = {
      {q_data_sur[4][i], q_data_sur[5][i], q_data_sur[6][i]},
      {q_data_sur[7][i], q_data_sur[8][i], q_data_sur[9][i]}
    };

    CeedScalar h[3];
    h[0] = dx;
    for (CeedInt j=1; j<3; j++)
      h[j] = 2/sqrt(dXdx[0][j]*dXdx[0][j] + dXdx[1][j]*dXdx[1][j]);

    InterpolateProfile(wall_dist, ubar, cij, &eps, &lt, stg_ctx);
    SpectrumConstants(wall_dist, eps, lt, h, nu, &hmax, &ke, &keta, &kcut);

    // Calculate total TKE per spectrum
    CeedScalar Ek_tot=0;
    CeedPragmaSIMD
    for(CeedInt n=0; n<nmodes; n++) {
      const CeedScalar dkappa = n==0 ? kappa[0] : kappa[n] - kappa[n-1];
      Ek_tot += Calc_qn(kappa[n], dkappa, keta, kcut, ke, 1.0);
    }
    // avoid underflowed and poorly defined spectrum coefficients
    stg_data[i] = Ek_tot != 0 ? 1/Ek_tot : 0;
  }
  return 0;
}

// Extrude the STGInflow profile through out the domain for an initial condition
CEED_QFUNCTION(ICsSTG)(void *ctx, CeedInt Q,
                       const CeedScalar *const *in, CeedScalar *const *out) {
  // Inputs
  const CeedScalar (*x)[CEED_Q_VLA]      = (const CeedScalar(*)[CEED_Q_VLA])in[0],
      (*q_data)[CEED_Q_VLA] = (const CeedScalar(*)[CEED_Q_VLA])in[1];
  // Outputs
  CeedScalar (*q0)[CEED_Q_VLA] = (CeedScalar(*)[CEED_Q_VLA])out[0];

  const STGShur14Context stg_ctx = (STGShur14Context) ctx;
  CeedScalar qn[STG_NMODES_MAX], u[3], ubar[3], cij[6], eps, lt;
  const CeedScalar dx     = stg_ctx->dx;
  const CeedScalar time   = stg_ctx->time;
  const CeedScalar theta0 = stg_ctx->theta0;
  const CeedScalar P0     = stg_ctx->P0;
  const CeedScalar mu     = stg_ctx->newtonian_ctx.mu;
  const CeedScalar cv     = stg_ctx->newtonian_ctx.cv;
  const CeedScalar cp     = stg_ctx->newtonian_ctx.cp;
  const CeedScalar Rd     = cp - cv;
  const CeedScalar rho    = P0 / (Rd * theta0);

  CeedPragmaSIMD
  for(CeedInt i=0; i<Q; i++) {
    const CeedScalar x_i[3] = {x[0][i], x[1][i], x[2][i]};
    // *INDENT-OFF*
    const CeedScalar dXdx[3][3] = {{q_data[1][i], q_data[2][i], q_data[3][i]},
                                   {q_data[4][i], q_data[5][i], q_data[6][i]},
                                   {q_data[7][i], q_data[8][i], q_data[9][i]}
                                  };
    // *INDENT-ON*

    CeedScalar h[3];
    h[0] = dx;
    for (CeedInt j=1; j<3; j++)
      h[j] = 2/sqrt(Square(dXdx[0][j]) + Square(dXdx[1][j]) + Square(dXdx[2][j]));

    InterpolateProfile(x_i[1], ubar, cij, &eps, &lt, stg_ctx);
    if (stg_ctx->use_fluctuating_IC) {
      CalcSpectrum(x_i[1], eps, lt, h, mu/rho, qn, stg_ctx);
      STGShur14_Calc(x_i, time, ubar, cij, qn, u, stg_ctx);
    } else {
      for (CeedInt j=0; j<3; j++) u[j] = ubar[j];
    }

    switch (stg_ctx->newtonian_ctx.state_var) {
    case STATEVAR_CONSERVATIVE:
      q0[0][i] = rho;
      q0[1][i] = u[0] * rho;
      q0[2][i] = u[1] * rho;
      q0[3][i] = u[2] * rho;
      q0[4][i] = rho * (0.5 * Dot3(u, u) + cv * theta0);
      break;

    case STATEVAR_PRIMITIVE:
      q0[0][i] = P0;
      q0[1][i] = u[0];
      q0[2][i] = u[1];
      q0[3][i] = u[2];
      q0[4][i] = theta0;
      break;
    }
  } // End of Quadrature Point Loop
  return 0;
}

/********************************************************************
 * @brief QFunction to calculate the inflow boundary condition
 *
 * This will loop through quadrature points, calculate the wavemode amplitudes
 * at each location, then calculate the actual velocity.
 */
CEED_QFUNCTION(STGShur14_Inflow)(void *ctx, CeedInt Q,
                                 const CeedScalar *const *in, CeedScalar *const *out) {

  //*INDENT-OFF*
  const CeedScalar (*q)[CEED_Q_VLA]          = (const CeedScalar(*)[CEED_Q_VLA]) in[0],
                   (*q_data_sur)[CEED_Q_VLA] = (const CeedScalar(*)[CEED_Q_VLA]) in[2],
                   (*X)[CEED_Q_VLA]          = (const CeedScalar(*)[CEED_Q_VLA]) in[3];

  CeedScalar(*v)[CEED_Q_VLA]            = (CeedScalar(*)[CEED_Q_VLA]) out[0],
            (*jac_data_sur)[CEED_Q_VLA] = (CeedScalar(*)[CEED_Q_VLA]) out[1];

  //*INDENT-ON*

  const STGShur14Context stg_ctx = (STGShur14Context) ctx;
  CeedScalar qn[STG_NMODES_MAX], u[3], ubar[3], cij[6], eps, lt;
  const bool is_implicit  = stg_ctx->is_implicit;
  const bool mean_only    = stg_ctx->mean_only;
  const bool prescribe_T  = stg_ctx->prescribe_T;
  const CeedScalar dx     = stg_ctx->dx;
  const CeedScalar mu     = stg_ctx->newtonian_ctx.mu;
  const CeedScalar time   = stg_ctx->time;
  const CeedScalar theta0 = stg_ctx->theta0;
  const CeedScalar P0     = stg_ctx->P0;
  const CeedScalar cv     = stg_ctx->newtonian_ctx.cv;
  const CeedScalar cp     = stg_ctx->newtonian_ctx.cp;
  const CeedScalar Rd     = cp - cv;
  const CeedScalar gamma  = cp/cv;

  CeedPragmaSIMD
  for(CeedInt i=0; i<Q; i++) {
    const CeedScalar rho = prescribe_T ? q[0][i] : P0 / (Rd * theta0);
    const CeedScalar x[] = { X[0][i], X[1][i], X[2][i] };
    const CeedScalar dXdx[2][3] = {
      {q_data_sur[4][i], q_data_sur[5][i], q_data_sur[6][i]},
      {q_data_sur[7][i], q_data_sur[8][i], q_data_sur[9][i]}
    };

    CeedScalar h[3];
    h[0] = dx;
    for (CeedInt j=1; j<3; j++)
      h[j] = 2/sqrt(Square(dXdx[0][j]) + Square(dXdx[1][j]));

    InterpolateProfile(X[1][i], ubar, cij, &eps, &lt, stg_ctx);
    if (!mean_only) {
      CalcSpectrum(X[1][i], eps, lt, h, mu/rho, qn, stg_ctx);
      STGShur14_Calc(x, time, ubar, cij, qn, u, stg_ctx);
    } else {
      for (CeedInt j=0; j<3; j++) u[j] = ubar[j];
    }

    const CeedScalar E_kinetic = .5 * rho * Dot3(u, u);
    CeedScalar E_internal, P;
    if (prescribe_T) {
      // Temperature is being set weakly (theta0) and for constant cv this sets E_internal
      E_internal = rho * cv * theta0;
      // Find pressure using
      P = rho * Rd * theta0; // interior rho with exterior T
    } else {
      E_internal = q[4][i] - E_kinetic; // uses prescribed rho and u, E from solution
      P = E_internal * (gamma - 1.);
    }

    const CeedScalar wdetJb  = (is_implicit ? -1. : 1.) * q_data_sur[0][i];
    // ---- Normal vect
    const CeedScalar norm[3] = {q_data_sur[1][i],
                                q_data_sur[2][i],
                                q_data_sur[3][i]
                               };

    const CeedScalar E = E_internal + E_kinetic;

    // Velocity normal to the boundary
    const CeedScalar u_normal = Dot3(norm, u);

    // The Physics
    // Zero v so all future terms can safely sum into it
    for (CeedInt j=0; j<5; j++) v[j][i] = 0.;

    // The Physics
    // -- Density
    v[0][i] -= wdetJb * rho * u_normal;

    // -- Momentum
    for (CeedInt j=0; j<3; j++)
      v[j+1][i] -= wdetJb *(rho * u_normal * u[j] +
                            norm[j] * P);

    // -- Total Energy Density
    v[4][i] -= wdetJb * u_normal * (E + P);

    jac_data_sur[0][i] = rho;
    jac_data_sur[1][i] = u[0];
    jac_data_sur[2][i] = u[1];
    jac_data_sur[3][i] = u[2];
    jac_data_sur[4][i] = E;
    for (int j=0; j<6; j++) jac_data_sur[5+j][i] = 0.;
  }
  return 0;
}

CEED_QFUNCTION(STGShur14_Inflow_Jacobian)(void *ctx, CeedInt Q,
    const CeedScalar *const *in, CeedScalar *const *out) {
  // *INDENT-OFF*
  // Inputs
  const CeedScalar (*dq)[CEED_Q_VLA]           = (const CeedScalar(*)[CEED_Q_VLA])in[0],
                   (*q_data_sur)[CEED_Q_VLA]   = (const CeedScalar(*)[CEED_Q_VLA])in[2],
                   (*jac_data_sur)[CEED_Q_VLA] = (const CeedScalar(*)[CEED_Q_VLA])in[4];
  // Outputs
  CeedScalar (*v)[CEED_Q_VLA] = (CeedScalar(*)[CEED_Q_VLA])out[0];
  // *INDENT-ON*
  const STGShur14Context stg_ctx = (STGShur14Context)ctx;
  const bool implicit     = stg_ctx->is_implicit;
  const CeedScalar cv     = stg_ctx->newtonian_ctx.cv;
  const CeedScalar cp     = stg_ctx->newtonian_ctx.cp;
  const CeedScalar Rd     = cp - cv;
  const CeedScalar gamma  = cp/cv;

  const CeedScalar theta0 = stg_ctx->theta0;
  const bool prescribe_T  = stg_ctx->prescribe_T;

  CeedPragmaSIMD
  // Quadrature Point Loop
  for (CeedInt i=0; i<Q; i++) {
    // Setup
    // -- Interp-to-Interp q_data
    // For explicit mode, the surface integral is on the RHS of ODE q_dot = f(q).
    // For implicit mode, it gets pulled to the LHS of implicit ODE/DAE g(q_dot, q).
    // We can effect this by swapping the sign on this weight
    const CeedScalar wdetJb  = (implicit ? -1. : 1.) * q_data_sur[0][i];

    // Calculate inflow values
    CeedScalar velocity[3];
    for (CeedInt j=0; j<3; j++) velocity[j] = jac_data_sur[5+j][i];

    // enabling user to choose between weak T and weak rho inflow
    CeedScalar drho, dE, dP;
    if (prescribe_T) {
      // rho should be from the current solution
      drho = dq[0][i];
      CeedScalar dE_internal = drho * cv * theta0;
      CeedScalar dE_kinetic = .5 * drho * Dot3(velocity, velocity);
      dE = dE_internal + dE_kinetic;
      dP = drho * Rd * theta0; // interior rho with exterior T
    } else { // rho specified, E_internal from solution
      drho = 0;
      dE = dq[4][i];
      dP = dE * (gamma - 1.);
    }
    const CeedScalar norm[3] = {q_data_sur[1][i],
                                q_data_sur[2][i],
                                q_data_sur[3][i]
                               };

    const CeedScalar u_normal = Dot3(norm, velocity);

    v[0][i] = - wdetJb * drho * u_normal;
    for (int j=0; j<3; j++)
      v[j+1][i] = -wdetJb * (drho * u_normal * velocity[j] + norm[j] * dP);
    v[4][i] = - wdetJb * u_normal * (dE + dP);
  } // End Quadrature Point Loop
  return 0;
}

/********************************************************************
 * @brief QFunction to calculate the strongly enforce inflow BC
 *
 * This QF is for the strong application of STG via libCEED (rather than
 * through the native PETSc `DMAddBoundary` -> `bcFunc` method.
 */
CEED_QFUNCTION(STGShur14_Inflow_StrongQF)(void *ctx, CeedInt Q,
    const CeedScalar *const *in, CeedScalar *const *out) {

  //*INDENT-OFF*
  const CeedScalar (*q_data_sur)[CEED_Q_VLA] = (const CeedScalar(*)[CEED_Q_VLA]) in[0],
                   (*coords)[CEED_Q_VLA]     = (const CeedScalar(*)[CEED_Q_VLA]) in[1],
                   (*scale)                  = (const CeedScalar(*)) in[2],
                   (*stg_data)[CEED_Q_VLA]   = (const CeedScalar(*)[CEED_Q_VLA]) in[3];

  CeedScalar(*bcval)[CEED_Q_VLA]            = (CeedScalar(*)[CEED_Q_VLA]) out[0];
  //*INDENT-ON*

  const STGShur14Context stg_ctx = (STGShur14Context) ctx;
  CeedScalar u[3], ubar[3], cij[6], eps, lt;
  const bool mean_only    = stg_ctx->mean_only;
  const CeedScalar dx     = stg_ctx->dx;
  const CeedScalar mu     = stg_ctx->newtonian_ctx.mu;
  const CeedScalar time   = stg_ctx->time;
  const CeedScalar theta0 = stg_ctx->theta0;
  const CeedScalar P0     = stg_ctx->P0;
  const CeedScalar cv     = stg_ctx->newtonian_ctx.cv;
  const CeedScalar cp     = stg_ctx->newtonian_ctx.cp;
  const CeedScalar Rd     = cp - cv;
  const CeedScalar rho    = P0 / (Rd * theta0);

  CeedPragmaSIMD
  for(CeedInt i=0; i<Q; i++) {
    const CeedScalar x[] = { coords[0][i], coords[1][i], coords[2][i] };
    const CeedScalar dXdx[2][3] = {
      {q_data_sur[4][i], q_data_sur[5][i], q_data_sur[6][i]},
      {q_data_sur[7][i], q_data_sur[8][i], q_data_sur[9][i]}
    };

    CeedScalar h[3];
    h[0] = dx;
    for (CeedInt j=1; j<3; j++)
      h[j] = 2/sqrt(Square(dXdx[0][j]) + Square(dXdx[1][j]));

    InterpolateProfile(coords[1][i], ubar, cij, &eps, &lt, stg_ctx);
    if (!mean_only) {
      if (1) {
        STGShur14_Calc_PrecompEktot(x, time, ubar, cij, stg_data[0][i],
                                    h, x[1], eps, lt, mu/rho, u, stg_ctx);
      } else { // Original way
        CeedScalar qn[STG_NMODES_MAX];
        CalcSpectrum(coords[1][i], eps, lt, h, mu/rho, qn, stg_ctx);
        STGShur14_Calc(x, time, ubar, cij, qn, u, stg_ctx);
      }
    } else {
      for (CeedInt j=0; j<3; j++) u[j] = ubar[j];
    }

    switch (stg_ctx->newtonian_ctx.state_var) {
    case STATEVAR_CONSERVATIVE:
      bcval[0][i] = scale[i] * rho;
      bcval[1][i] = scale[i] * rho * u[0];
      bcval[2][i] = scale[i] * rho * u[1];
      bcval[3][i] = scale[i] * rho * u[2];
      bcval[4][i] = 0.;
      break;

    case STATEVAR_PRIMITIVE:
      bcval[0][i] = 0;
      bcval[1][i] = scale[i] * u[0];
      bcval[2][i] = scale[i] * u[1];
      bcval[3][i] = scale[i] * u[2];
      bcval[4][i] = scale[i] * theta0;
      break;
    }
  }
  return 0;
}

#endif // stg_shur14_h