xref: /petsc/config/examples/arch-cray-xc40-knl-opt.py (revision 01ab93323be064e565edb55c3473ceeb6d40f6e1)

#!/usr/bin/python

# Example configure script for Cray XC-series systems with Intel "Knights
# Landing" (KNL) processors.
# This script was constructed for and tested on the Cori XC40 system, but
# should work (or be easily modified to do so) on other Cray XC-series systems.

if __name__ == '__main__':
  import os
  import sys
  sys.path.insert(0, os.path.abspath('config'))
  import configure
  configure_options = [
    # We use the Cray compiler wrappers below, regardless of what underlying
    # compilers we are actually using.
    '--with-cc=cc',
    '--with-cxx=CC',
    '--with-fc=ftn',

    # Cray supports the use of Intel, Cray, or GCC compilers.
    # Make sure that the correct programming environment module is loaded,
    # and then comment/uncomment the apprpriate stanzas below.

    # Flags for the Intel compilers:
    # NOTE: We are specifying the undocumented compiler option
    # '-mP2OPT_hpo_vec_remainder=F', which disables generation of vectorized
    # remainder loops; this works around some incorrect code generation in the
    # Intel compiler version 17.0, up to and including version 17.0.4
    # This option has not been tested, and should NOT be used, with later
    # compiler versions -- the behavior may change without warning between
    # versions. It is anticipated that the code generation issue will be fixed
    # in the version 18 compiler at release.
    '--COPTFLAGS=-g -xMIC-AVX512 -O3 -mP2OPT_hpo_vec_remainder=F',
    '--CXXOPTFLAGS=-g -xMIC-AVX512 -O3 -mP2OPT_hpo_vec_remainder=F',
    '--FOPTFLAGS=-g -xMIC-AVX512 -O3 -mP2OPT_hpo_vec_remainder=F',
    # Use  BLAS and LAPACK provided by Intel MKL.
    # (Below only works when PrgEnv-intel is loaded; it is possible, but not
    # straightfoward, to use MKL on Cray systems with non-Intel compilers.)
    # If Cray libsci is preferred, comment out the line below.
    '--with-blaslapack-lib=-mkl -L' + os.environ['MKLROOT'] + '/lib/intel64',

    # Flags for the Cray compilers:
#    '--COPTFLAGS=-g -hcpu=mic-knl'
#    '--CXXOPTFLAGS=-g -hcpu=mic-knl'
#    '--FOPTFLAGS=-g -hcpu=mic-knl'

    # Flags for the GCC compilers:
#    '--COPTFLAGS=-g -march=knl -O3 -mavx512f -mavx512cd -mavx512er -mavx512pf',
#    '--CXXOPTFLAGS=-g -march=knl -O3 -mavx512f -mavx512cd -mavx512er -mavx512pf',
#    '--FOPTFLAGS=-g -march=knl -O3 -mavx512f -mavx512cd -mavx512er -mavx512pf',

    '--with-debugging=no',
    '--with-memalign=64',
    '--with-mpiexec=srun', # Some systems (e.g., ALCF Theta) use '--with-mpiexec=aprun' instead.
    '--known-mpi-shared-libraries=1',
    '--with-clib-autodetect=0',
    '--with-fortranlib-autodetect=0',
    '--with-cxxlib-autodetect=0',
    '--LIBS=-lstdc++',
    '--LDFLAGS=-dynamic', # Needed if wish to use dynamic shared libraries.

    # Below "--known-" options are from the "reconfigure.py" script generated
    # after an intial configure.py run using '--with-batch'.
    '--known-level1-dcache-size=32768',
    '--known-level1-dcache-linesize=64',
    '--known-level1-dcache-assoc=8',
    '--known-sizeof-char=1',
    '--known-sizeof-void-p=8',
    '--known-sizeof-short=2',
    '--known-sizeof-int=4',
    '--known-sizeof-long=8',
    '--known-sizeof-long-long=8',
    '--known-sizeof-float=4',
    '--known-sizeof-double=8',
    '--known-sizeof-size_t=8',
    '--known-bits-per-byte=8',
    '--known-memcmp-ok=1',
    '--known-sizeof-MPI_Comm=4',
    '--known-sizeof-MPI_Fint=4',
    '--known-mpi-long-double=1',
    '--known-mpi-int64_t=1',
    '--known-mpi-c-double-complex=1',
    '--known-sdot-returns-double=0',
    '--known-snrm2-returns-double=0',
    '--known-has-attribute-aligned=1',
    '--with-batch=1',
  ]
  configure.petsc_configure(configure_options)