xref: /petsc/gmakefile.test (revision 20844ca6ec9874400c56a32cb5f2741fa7cdb0d2)

# -*- mode: makefile-gmake -*-

CONFIGDIR := config

# TESTSRCDIR is always relative to gmakefile.test
#  This must be before includes
mkfile_path := $(abspath $(MAKEFILE_LIST))
TESTSRCDIR := $(dir $(abspath $(firstword $(MAKEFILE_LIST))))

# If $(PETSC_ARCH) is empty, this defines it and PETSC_DIR
include $(PETSC_ARCH)/lib/petsc/conf/petscvariables
include ./lib/petsc/conf/variables

ifeq ($(TESTDIR),)  # Default
TESTDIR := $(PETSC_ARCH)/tests
gmakegentest_opts=
else
gmakegentest_opts="-t $(TESTDIR)"
TESTDIR := $(TESTDIR)
endif
MODDIR := $(PETSC_ARCH)/include
TESTLOGFILE = $(TESTDIR)/examples-$(PETSC_ARCH).log

pkgs := sys vec mat dm ksp snes ts tao

petscconf      := $(PETSC_ARCH)/include/petscconf.h
petscvariables := $(PETSC_ARCH)/lib/petsc/conf/petscvariables
generatedtest  := $(PETSC_ARCH)/lib/petsc/conf/testfiles

.SECONDEXPANSION:		# to expand $$(@D)/.DIR

TESTFLAGS :=             # Initialize as simple variable

#workarround old cygwin versions
ifeq ($(PETSC_CYGWIN_BROKEN_PIPE),1)
ifeq ($(shell basename $(AR)),ar)
  V ?=1
endif
endif
V ?= $(if $(findstring s,$(MAKEFLAGS)),0)
ifeq ($(V),)  # Default
  quiet_HELP := "Use \"$(MAKE) V=1\" to see verbose compile lines, \"$(MAKE) V=0\" to suppress.\n"
  quiet = @printf $(quiet_HELP)$(eval quiet_HELP:=)"  %10s %s\n" "$1$2" "$@"; $($1)
  quiettest = @printf "  %10s %s\n" "TEST" "$(@:$(TESTDIR)/counts/%.counts=%)";
else ifeq ($(V),0)		# Suppress entire command
  quiet = @$($1)
  quiettest = @
else				# Show the full command line
  quiet = $($1)
  quiettest =
  TESTFLAGS += -v
endif

ifeq ($(FORCE),1)
  TESTFLAGS += -f    # force test execution
endif
ifeq ($(VALGRIND),1)
  TESTFLAGS += -V    # Add valgrind to the flags
endif
ifeq ($(REPLACE),1)
  TESTFLAGS += -m    # Replace results by passing -m to petscdiff
endif
ifeq ($(DIFF_NUMBERS),1)
  TESTFLAGS += -j    # Pass -j to petscdiff to diff the actual numbers
endif
ifdef OPTIONS
  TESTFLAGS += -a '$(OPTIONS)'   # override arguments
endif
ifdef EXTRA_OPTIONS
  TESTFLAGS += -e '$(EXTRA_OPTIONS)'  # add extra arguments
endif
ifdef NP
  TESTFLAGS += -n $(NP)  # set number of processes
endif
# Override the default timeout that may be found at the top of config/petsc_harness.sh
# This must be an integer.  It is given in seconds.
ifdef TIMEOUT
  TESTFLAGS += -t $(TIMEOUT)  # Override the default timeout
endif



$(generatedtest) : $(petscconf) $(petscvariables) $(CONFIGDIR)/gmakegentest.py $(TESTDIR)/.DIR | $$(@D)/.DIR
	$(PYTHON) $(CONFIGDIR)/gmakegentest.py --petsc-arch=$(PETSC_ARCH) $(gmakegentest_opts)

-include $(generatedtest)

ifeq ($(PETSC_LANGUAGE),CXXONLY)
  cc_name := CXX
else
  cc_name := CC
endif

PETSC_COMPILE.c = $(call quiet,$(cc_name)) -c $(PCC_FLAGS) $(CFLAGS) $(CCPPFLAGS) $(C_DEPFLAGS)
PETSC_COMPILE.cxx = $(call quiet,CXX) -c $(CXX_FLAGS) $(CFLAGS) $(CCPPFLAGS) $(CXX_DEPFLAGS)
PETSC_COMPILE.cu = $(call quiet,CUDAC) -c $(CUDAC_FLAGS) --compiler-options="$(PCC_FLAGS) $(CXXFLAGS) $(CCPPFLAGS)"
PETSC_GENDEPS.cu = $(call quiet,CUDAC,.dep) --generate-dependencies --output-directory=$(@D) $(CUDAC_FLAGS) --compiler-options="$(PCC_FLAGS) $(CXXFLAGS) $(CCPPFLAGS)"
PETSC_COMPILE.F = $(call quiet,FC) -c $(FC_FLAGS) $(FFLAGS) $(FCPPFLAGS) $(FC_DEPFLAGS)

testlangs := c cu cxx F F90
concattestlang = $(foreach lang, $(2), $(testsrcs-$(1).$(lang):%.$(lang)=$(TESTDIR)/%.o))
testsrcs.o := $(foreach pkg, $(pkgs), $(call concattestlang,$(pkg),$(testlangs)))
testsrcs-rel := $(foreach pkg, $(pkgs), $(foreach lang, $(testlangs), $(testsrcs-$(pkg).$(lang))))
testsrcs := $(foreach sfile, $(testsrcs-rel), $(TESTSRCDIR)/$(sfile))

# Refresh testfiles when sources change, but don't balk if the source file is nonexistent (deleted)
$(generatedtest) : $(testsrcs)
$(testsrcs) :

$(TESTDIR)/%.o : %.c | $$(@D)/.DIR
	$(PETSC_COMPILE.c) $(abspath $<) -o $@

$(TESTDIR)/%.o : %.cxx | $$(@D)/.DIR
	$(PETSC_COMPILE.cxx) $(abspath $<) -o $@

$(TESTDIR)/%.o : %.cu | $$(@D)/.DIR
	$(PETSC_COMPILE.cu) $(abspath $<) -o $@ # Compile first so that if there is an error, it comes from a normal compile
	@$(PETSC_GENDEPS.cu) $(abspath $<) -o $(@:%.o=%.d) # Generate the dependencies for later

# Test modules go in a different directory
$(TESTDIR)/%.o : MODDIR = $(@D)
FCMOD = cd
$(TESTDIR)/%.o : %.F | $$(@D)/.DIR
ifeq ($(FC_MODULE_OUTPUT_FLAG),)
	$(call quiet,FCMOD) $(MODDIR) && $(FC) -c $(FC_FLAGS) $(FFLAGS) $(FCPPFLAGS) $(FC_DEPFLAGS) $(abspath $<) -o $(abspath $@)
else
	$(PETSC_COMPILE.F) $(abspath $<) -o $@ $(FC_MODULE_OUTPUT_FLAG)$(MODDIR)
endif

$(TESTDIR)/%.o : %.F90 | $$(@D)/.DIR
ifeq ($(FC_MODULE_OUTPUT_FLAG),)
	$(call quiet,FCMOD) $(MODDIR) && $(FC) -c $(FC_FLAGS) $(FFLAGS) $(FCPPFLAGS) $(FC_DEPFLAGS) $(abspath $<) -o $(abspath $@)
else
	$(PETSC_COMPILE.F) $(abspath $<) -o $@ $(FC_MODULE_OUTPUT_FLAG)$(MODDIR)
endif

# link line constructed differently for gmakefile vs gmakefile.test invocation
ifeq ($(libpetscall),)
PETSC_TEST_LIB = $(PETSC_LIB)
else
PETSC_TEST_LIB = $(C_SH_LIB_PATH) $(PETSC_EXTERNAL_LIB_BASIC)
endif

# Test executables
$(TESTDIR)/%f : $(TESTDIR)/%f.o $$^ $(libpetscall)
	$(call quiet,FLINKER) -o $@ $^ $(PETSC_TEST_LIB)

$(TESTDIR)/%f90 : $(TESTDIR)/%f90.o $$^ $(libpetscall)
	$(call quiet,FLINKER) -o $@ $^ $(PETSC_TEST_LIB)

$(TESTDIR)/% : $(TESTDIR)/%.o $$^ $(libpetscall)
	$(call quiet,CLINKER) -o $@ $^ $(PETSC_TEST_LIB)

# Fortran source files need petsc*.mod, which isn't explicitly managed in the makefile.
$(foreach pkg, $(pkgs), $(call concattestlang,$(pkg),F F90)) : $(libpetscall)

# Testing convenience targets
.PHONY: test pre-clean

test: pre-clean report_tests

pre-clean:
	@$(RM) -r $(TESTDIR)/counts $(TESTLOGFILE)
	@touch $(TESTLOGFILE)

.PHONY: $(foreach pkg, $(pkgs), test-$(pkg) $(foreach lang, $(testlangs), test-$(pkg).$(lang) test-rm-$(pkg).$(lang)))
testpkgs := $(foreach pkg, $(pkgs), test-$(pkg))
# Targets to run tests in test-$pkg.$lang and delete the executables, language by language
$(testpkgs) : test-% : $(foreach lang, $(testlangs), test-rm-%.$(lang))
# List of raw test run targets
alltesttargets := $(foreach tp, $(testpkgs), $(foreach lang, $(testlangs), $($(tp).$(lang))))

# Run targets
$(alltesttargets) : % : $(TESTDIR)/counts/%.counts
.PHONY: $(alltesttargets)

$(TESTDIR)/counts/%.counts :
	$(quiettest) $< $(TESTFLAGS)

# Targets to run tests and remove executables, by package-lang pairs.
# Run the tests in each batch using recursive invocation of make because
# we need all of them to complete before removing the executables.  Make
# doesn't guarantee an exploration order for the graph.  Only recursive
# if there is something to be done.
alltest-rm := $(foreach pkg, $(pkgs), $(foreach lang, $(testlangs), test-rm-$(pkg).$(lang)))
$(alltest-rm) : test-rm-% : test-%
ifneq ($(NO_RM),1)
	$(call quiet,RM) $(addprefix $(TESTDIR)/,$(basename $($(@:test-rm-%=testsrcs-%))))
endif

# Remove intermediate .o files
# This only removes the files at the end which is insufficient
#.INTERMEDIATE: $(testsrcs.o:%.o=%)

# all sources should get recompiled when petscvariables changes (i.e when configure is rerun or when petscvariables is manually edited.)
$(testsrcs.o) : $(petscvariables)

%/.DIR :
	@mkdir -p $(@D)
	@touch $@

.PRECIOUS: %/.DIR

.SUFFIXES: # Clear .SUFFIXES because we don't use implicit rules
.DELETE_ON_ERROR:               # Delete likely-corrupt target file if rule fails

.PHONY: clean cleantest all print

cleantest:
	${RM} -r $(TESTDIR) $(generatedtest)

clean: cleantest

# make print VAR=the-variable
print:
	@echo $($(VAR))

alltest.d := $(testsrcs.o:%.o=%.d)
# Tell make that alltest.d are all up to date.  Without this, the include
# below has quadratic complexity, taking more than one second for a
# do-nothing build of PETSc (much worse for larger projects)
$(alltest.d) : ;

-include $(alltest.d)

# Tests can be generated by searching
# Percent is a wildcard (only one allowed):
#    make -f gmakefile test search=sys%ex2
# To match internal substrings (matches *ex2*):
#    make -f gmakefile test searchin=ex2
# Search and searchin can be combined:
#    make -f gmakefile test search='sys%' searchin=ex2
# For args:
#    make -f gmakefile test argsearch=cuda
# For general glob-style searching using python:
# NOTE: uses shell which is possibly slower and is possibly more brittle
#    make -f gmakefile test globsearch='sys*ex2*'
ifdef search
  TESTTARGETS := $(filter $(search),$(alltesttargets))
  ifdef searchin
    TESTTARGETS2 := $(foreach v,$(TESTTARGETS),$(if $(findstring $(searchin),$(v)),$(v)))
    TESTTARGETS := $(TESTTARGETS2)
  endif
else ifdef searchin
  TESTTARGETS := $(foreach v,$(alltesttargets),$(if $(findstring $(searchin),$(v)),$(v)))
else ifdef argsearch
  TESTTARGETS := $(foreach v,$(alltesttargets),$(if $(findstring $(argsearch),$($(v)_ARGS)),$(v)))
else ifdef globsearch
  TESTTARGETS := $(shell $(PYTHON) -c"import sys,fnmatch; print ' '.join(fnmatch.filter(sys.argv[2].split(),sys.argv[1]))" '$(globsearch)' '$(alltesttargets)')
else                            # No filter - run them all, but delete the executables as we go
  TESTTARGETS := $(testpkgs)
endif

.PHONY: report_tests print-test

print-test:
	-@echo $(TESTTARGETS)

report_tests: $(TESTTARGETS)
	-@$(PYTHON) $(CONFIGDIR)/report_tests.py -d $(PETSC_ARCH)/tests/counts

# Do not how how to invoke test from makefile
HASGMAKEFILE := $(filter gmakefile,$(MAKEFILE_LIST))
ifeq ($(HASGMAKEFILE),gmakefile)
helpdeps:=help-make help-targets
makefile="gmakefile"
else
helpdeps:=help-make help-targets help-test
makefile="gmakefile.test"
endif

help: ${helpdeps}
	-@echo "Above is from: ${helpdeps}"

help-make:
	-@echo
	-@echo "Basic build usage:"
	-@echo "   make -f ${makefile} <options>"
	-@echo
	-@echo "Options:"
	-@echo "  V=0           Very quiet builds"
	-@echo "  V=1           Verbose builds"
	-@echo

help-targets:
	-@echo "All makefile targets and their dependencies:"
	-@grep ^[a-z] ${makefile} | grep : | grep -v =
	-@echo
	-@echo

help-test:
	-@echo "Basic test usage:"
	-@echo "   make -f ${makefile} test <options>"
	-@echo
	-@echo "Options:"
	-@echo "  NO_RM=1           Do not remove the executables after running"
	-@echo "  REPLACE=1         Replace the output in the PETSC_DIR source tree (-m to test scripts)"
	-@echo "  DIFF_NUMBERS=1    Diff the numbers in the output (-j to test scripts and petscdiff)"
	-@echo "  VALGRIND=1        Execute the tests using valgrind (-V to test scripts)"
	-@echo "  TESTDIR='tests'   Subdirectory where the tests are run ($${PETSC_DIR}/$${PETSC_ARCH}/$${TESTDIR}"
	-@echo "                    or $${PREFIX_DIR}/$${TESTDIR}"
	-@echo "                    or $${PREFIX_DIR}/share/petsc/examples/$${TESTDIR})"
	-@echo "  OPTIONS='<args>'  Override options to scripts (-a to test scripts)"
	-@echo "  EXTRA_OPTIONS='<args>'  Add options to scripts (-e to test scripts)"
	-@echo
	-@echo "Tests can be generated by searching:"
	-@echo "  Percent is a wildcard (only one allowed):"
	-@echo "    make -f ${makefile} test search=sys%ex2"
	-@echo
	-@echo "  To match internal substrings (matches *ex2*):"
	-@echo "    make -f ${makefile} test searchin=ex2"
	-@echo
	-@echo "  Search and searchin can be combined:"
	-@echo "    make -f ${makefile} test search='sys%' searchin=ex2"
	-@echo
	-@echo "  To match patterns in the arguments:"
	-@echo "    make -f ${makefile} test argsearch=cuda"
	-@echo
	-@echo "  For general glob-style searching using python:"
	-@echo "   NOTE: uses shell which is possibly slower and more brittle"
	-@echo "    make -f ${makefile} test globsearch='sys*ex2*'"
	-@echo
	-@echo "  To see which targets match a given pattern (useful for doing a specific target):"
	-@echo "    make -f ${makefile} print-test search=sys%"
	-@echo "  which is equivalent to:"
	-@echo "    make -f ${makefile} print VAR=TESTTARGETS search='sys%'"
	-@echo
	-@echo "  To build an executable, give full path to location:"
	-@echo '    make -f ${makefile} $${PETSC_ARCH}/tests/src/sys/examples/tests/ex1'
	-@echo "  or make the test with NO_RM=1"
	-@echo