1# 2# This is the makefile for compiling PETSc. See 3# http://www.mcs.anl.gov/petsc/documentation/installation.html for directions on installing PETSc. 4# See also conf for additional commands. 5# 6ALL: all 7LOCDIR = ./ 8DIRS = src include tutorials interfaces share/petsc/matlab 9CFLAGS = 10FFLAGS = 11CPPFLAGS = 12FPPFLAGS = 13 14# next line defines PETSC_DIR and PETSC_ARCH if they are not set 15include ././${PETSC_ARCH}/lib/petsc/conf/petscvariables 16include ${PETSC_DIR}/lib/petsc/conf/variables 17include ${PETSC_DIR}/lib/petsc/conf/rules 18include ${PETSC_DIR}/lib/petsc/conf/test 19 20# This makefile contains a lot of PHONY targets with improperly specified prerequisites 21# where correct execution instead depends on the targets being processed in the correct 22# order. This is gross, but this makefile doesn't really do any work. Sub-makes still 23# benefit from parallelism. 24.NOTPARALLEL: 25 26# 27# Basic targets to build PETSc libraries. 28# all: builds the c, fortran, and f90 libraries 29all: 30 +@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} chk_petscdir chk_upgrade | tee ${PETSC_ARCH}/lib/petsc/conf/make.log 31 @ln -sf ${PETSC_ARCH}/lib/petsc/conf/make.log make.log 32 +@if [ "${MAKE_IS_GNUMAKE}" != "" ]; then \ 33 ${OMAKE_PRINTDIR} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} all-gnumake-local 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log; \ 34 elif [ "${PETSC_BUILD_USING_CMAKE}" != "" ]; then \ 35 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} all-cmake-local 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log \ 36 | egrep -v '( --check-build-system |cmake -E | -o CMakeFiles/petsc[[:lower:]]*.dir/| -o lib/libpetsc|CMakeFiles/petsc[[:lower:]]*\.dir/(build|depend|requires)|-f CMakeFiles/Makefile2|Dependee .* is newer than depender |provides\.build. is up to date)'; \ 37 else \ 38 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} all-legacy-local 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log \ 39 | ${GREP} -v "has no symbols"; \ 40 fi 41 @egrep -i "( error | error: |no such file or directory)" ${PETSC_ARCH}/lib/petsc/conf/make.log | tee ${PETSC_ARCH}/lib/petsc/conf/error.log > /dev/null 42 +@if test -s ${PETSC_ARCH}/lib/petsc/conf/error.log; then \ 43 printf ${PETSC_TEXT_HILIGHT}"**************************ERROR*************************************\n" 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log; \ 44 echo " Error during compile, check ${PETSC_ARCH}/lib/petsc/conf/make.log" 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log; \ 45 echo " Send it and ${PETSC_ARCH}/lib/petsc/conf/configure.log to petsc-maint@mcs.anl.gov" 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log;\ 46 printf "********************************************************************"${PETSC_TEXT_NORMAL}"\n" 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log;\ 47 else \ 48 ${OMAKE} shared_install PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log ;\ 49 fi #solaris make likes to print the whole command that gave error. So split this up into the smallest chunk below 50 @echo "Finishing make run at `date +'%a, %d %b %Y %H:%M:%S %z'`" >> ${PETSC_ARCH}/lib/petsc/conf/make.log 51 @if test -s ${PETSC_ARCH}/lib/petsc/conf/error.log; then exit 1; fi 52 53all-gnumake: 54 @if [ "${MAKE_IS_GNUMAKE}" != "" ]; then \ 55 ${OMAKE_PRINTDIR} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} PETSC_BUILD_USING_CMAKE="" all;\ 56 else printf ${PETSC_TEXT_HILIGHT}"Build not configured for GNUMAKE. Quiting"${PETSC_TEXT_NORMAL}"\n"; exit 1; fi 57 58all-cmake: 59 @if [ "${PETSC_BUILD_USING_CMAKE}" != "" ]; then \ 60 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} MAKE_IS_GNUMAKE="" all;\ 61 else printf ${PETSC_TEXT_HILIGHT}"Build not configured for CMAKE. Quiting"${PETSC_TEXT_NORMAL}"\n"; exit 1; fi 62 63all-legacy: 64 @${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} PETSC_BUILD_USING_CMAKE="" MAKE_IS_GNUMAKE="" all 65 66all-gnumake-local: info gnumake matlabbin mpi4py-build petsc4py-build libmesh-build slepc-build 67 68all-cmake-local: info cmakegen cmake matlabbin mpi4py-build petsc4py-build 69 70all-legacy-local: chklib_dir info deletelibs deletemods build matlabbin shared_nomesg mpi4py-build petsc4py-build 71 72# 73# Prints information about the system and version of PETSc being compiled 74# 75info: 76 -@echo "==========================================" 77 -@echo " " 78 -@echo "See documentation/faq.html and documentation/bugreporting.html" 79 -@echo "for help with installation problems. Please send EVERYTHING" 80 -@echo "printed out below when reporting problems. Please check the" 81 -@echo "mailing list archives and consider subscribing." 82 -@echo " " 83 -@echo " http://www.mcs.anl.gov/petsc/miscellaneous/mailing-lists.html" 84 -@echo " " 85 -@echo "==========================================" 86 -@echo Starting make run on `hostname` at `date +'%a, %d %b %Y %H:%M:%S %z'` 87 -@echo Machine characteristics: `uname -a` 88 -@echo "-----------------------------------------" 89 -@echo "Using PETSc directory: ${PETSC_DIR}" 90 -@echo "Using PETSc arch: ${PETSC_ARCH}" 91 -@echo "-----------------------------------------" 92 -@grep "define PETSC_VERSION" ${PETSC_DIR}/include/petscversion.h | ${SED} "s/........//" 93 -@echo "-----------------------------------------" 94 -@echo "Using configure Options: ${CONFIGURE_OPTIONS}" 95 -@echo "Using configuration flags:" 96 -@grep "\#define " ${PETSCCONF_H} 97 -@echo "-----------------------------------------" 98 -@echo "Using C/C++ compile: ${PETSC_COMPILE}" 99 -@if [ "${PETSC_LANGUAGE}" = "CONLY" -a "${MPICC_SHOW}" != "" ]; then \ 100 printf "mpicc -show: %b\n" "${MPICC_SHOW}"; \ 101 elif [ "${PETSC_LANGUAGE}" = "CXXONLY" -a "${MPICXX_SHOW}" != "" ]; then \ 102 printf "mpicxx -show: %b\n" "${MPICXX_SHOW}"; \ 103 fi; 104 -@if [ "${FC}" != "" ]; then \ 105 echo "Using Fortran compile: ${PETSC_FCOMPILE}";\ 106 if [ "${MPIFC_SHOW}" != "" ]; then \ 107 printf "mpif90 -show: %b\n" "${MPIFC_SHOW}"; \ 108 fi; \ 109 fi 110 -@if [ "${CUDAC}" != "" ]; then \ 111 echo "Using CUDA compile: ${PETSC_CUCOMPILE}";\ 112 fi 113 -@echo "-----------------------------------------" 114 -@echo "Using C/C++ linker: ${PCC_LINKER}" 115 -@echo "Using C/C++ flags: ${PCC_LINKER_FLAGS}" 116 -@if [ "${FC}" != "" ]; then \ 117 echo "Using Fortran linker: ${FC_LINKER}";\ 118 echo "Using Fortran flags: ${FC_LINKER_FLAGS}";\ 119 fi 120 -@echo "-----------------------------------------" 121 -@echo "Using system modules: ${LOADEDMODULES}" 122 -@TESTDIR=`mktemp -q -d -t petscmpi-XXXXXXXX` && \ 123 echo '#include <mpi.h>' > $${TESTDIR}/mpitest.c && \ 124 BUF=`${CPP} ${PETSC_CCPPFLAGS} $${TESTDIR}/mpitest.c |grep 'mpi\.h' | ( head -1 ; cat > /dev/null )` && \ 125 echo Using mpi.h: $${BUF}; ${RM} -rf $${TESTDIR} 126 -@echo "-----------------------------------------" 127 -@echo "Using libraries: ${PETSC_LIB}" 128 -@echo "------------------------------------------" 129 -@echo "Using mpiexec: ${MPIEXEC}" 130 -@echo "------------------------------------------" 131 -@echo "Using MAKEFLAGS: -j$(MAKE_NP) -l$(MAKE_LOAD) $(MAKEFLAGS)" 132 -@echo "==========================================" 133 134# 135# Builds the PETSc libraries 136# This target also builds fortran77 and f90 interface 137# files and compiles .F files 138# 139build: 140 -@echo "BEGINNING TO COMPILE LIBRARIES IN ALL DIRECTORIES" 141 -@echo "=========================================" 142 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=libfast tree 143 -@${RANLIB} ${PETSC_LIB_DIR}/*.${AR_LIB_SUFFIX} > tmpf 2>&1 ; ${GREP} -v "has no symbols" tmpf; ${RM} tmpf; 144 -@echo "Completed building libraries" 145 -@echo "=========================================" 146# 147# Build MatLab binaries 148# 149matlabbin: 150 -@if [ "${MATLAB_MEX}" != "" -a "${MATLAB_SOCKET}" != "" -a "${PETSC_SCALAR}" = "real" -a "${PETSC_PRECISION}" = "double" ]; then \ 151 echo "BEGINNING TO COMPILE MATLAB INTERFACE"; \ 152 if [ ! -d "${PETSC_DIR}/${PETSC_ARCH}/lib/petsc" ] ; then ${MKDIR} ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc; fi; \ 153 if [ ! -d "${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/matlab" ] ; then ${MKDIR} ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/matlab; fi; \ 154 cd src/sys/classes/viewer/impls/socket/matlab && ${OMAKE} matlabcodes PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR}; \ 155 echo "========================================="; \ 156 fi 157# 158# Builds PETSc test examples for a given architecture 159# 160test_install: test 161check: test 162test: 163 -+@${OMAKE} PATH="${PETSC_DIR}/${PETSC_ARCH}/lib:${PATH}" PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} test_build 2>&1 | tee ./${PETSC_ARCH}/lib/petsc/conf/test.log 164testx: 165 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testx_build 2>&1 | tee ./${PETSC_ARCH}/lib/petsc/conf/testx.log 166test_build: 167 -@echo "Running test examples to verify correct installation" 168 -@echo "Using PETSC_DIR=${PETSC_DIR} and PETSC_ARCH=${PETSC_ARCH}" 169 +@cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 170 +@cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testex19 171 +@if [ "${HYPRE_LIB}" != "" ] && [ "${PETSC_WITH_BATCH}" = "" ]; then \ 172 cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex19_hypre; \ 173 fi; 174 +@if [ "${MUMPS_LIB}" != "" ] && [ "${PETSC_WITH_BATCH}" = "" ]; then \ 175 cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex19_fieldsplit_mumps; \ 176 fi; 177 +@if [ "${SUPERLU_DIST_LIB}" != "" ] && [ "${PETSC_WITH_BATCH}" = "" ]; then \ 178 cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex19_superlu_dist; \ 179 fi; 180 +@if ( [ "${ML_LIB}" != "" ] || [ "${TRILINOS_LIB}" != "" ] ) && [ "${PETSC_WITH_BATCH}" = "" ]; then \ 181 cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex19_ml; \ 182 fi; 183 +@cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ex19.rm 184 +@if [ "${PETSC4PY}" = "yes" ]; then \ 185 cd src/ksp/ksp/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testex100; \ 186 fi; 187 +@egrep "^#define PETSC_HAVE_FORTRAN 1" ${PETSCCONF_H} | tee .ftn.log > /dev/null; \ 188 if test -s .ftn.log; then \ 189 cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testex5f; \ 190 fi; ${RM} .ftn.log; 191 +@cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 192 -@echo "Completed test examples" 193testx_build: 194 -@echo "Running graphics test example to verify correct X11 installation" 195 -@echo "Using PETSC_DIR=${PETSC_DIR} and PETSC_ARCH=${PETSC_ARCH}" 196 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 197 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testxex19 198 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 199 -@echo "Completed graphics test example" 200 201# Ranlib on the libraries 202ranlib: 203 ${RANLIB} ${PETSC_LIB_DIR}/*.${AR_LIB_SUFFIX} 204 205# Deletes PETSc libraries 206deletelibs: 207 -${RM} -rf ${PETSC_LIB_DIR}/libpetsc*.* 208deletemods: 209 -${RM} -f ${PETSC_DIR}/${PETSC_ARCH}/include/petsc*.mod 210 211# Cleans up build 212allclean-legacy: deletelibs deletemods 213 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=clean-legacy tree 214allclean-cmake: 215 -@cd ${PETSC_ARCH} && ${OMAKE} clean 216allclean-gnumake: 217 -@${OMAKE} -f gmakefile clean 218 219allclean: 220 @if [ "${MAKE_IS_GNUMAKE}" != "" ]; then \ 221 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} allclean-gnumake; \ 222 elif [ "${PETSC_BUILD_USING_CMAKE}" != "" ]; then \ 223 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} allclean-cmake; \ 224 else \ 225 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} allclean-legacy; \ 226 fi 227 228clean:: allclean 229 230distclean: chk_petscdir 231 @if [ -f ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/conf/reconfigure-${PETSC_ARCH}.py ]; then \ 232 echo "*** Preserving ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/conf/reconfigure-${PETSC_ARCH}.py in ${PETSC_DIR} ***"; \ 233 mv -f ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/conf/reconfigure-${PETSC_ARCH}.py ${PETSC_DIR}/; fi 234 @echo "*** Deleting all build files in ${PETSC_DIR}/${PETSC_ARCH} ***" 235 -${RM} -rf ${PETSC_DIR}/${PETSC_ARCH}/ 236 237 238# 239reconfigure: 240 @${PYTHON} ${PETSC_ARCH}/lib/petsc/conf/reconfigure-${PETSC_ARCH}.py 241# 242install: 243 @${PYTHON} ./config/install.py -destDir=${DESTDIR} 244 +${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} mpi4py-install petsc4py-install libmesh-install slepc-install 245 246newall: 247 -@cd src/sys; @${PYTHON} ${PETSC_DIR}/config/builder.py 248 -@cd src/vec; @${PYTHON} ${PETSC_DIR}/config/builder.py 249 -@cd src/mat; @${PYTHON} ${PETSC_DIR}/config/builder.py 250 -@cd src/dm; @${PYTHON} ${PETSC_DIR}/config/builder.py 251 -@cd src/ksp; @${PYTHON} ${PETSC_DIR}/config/builder.py 252 -@cd src/snes; @${PYTHON} ${PETSC_DIR}/config/builder.py 253 -@cd src/ts; @${PYTHON} ${PETSC_DIR}/config/builder.py 254 255streams: 256 +cd src/benchmarks/streams; ${OMAKE} PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} streams 257 258stream: 259 +cd src/benchmarks/streams; ${OMAKE} PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} stream 260# ------------------------------------------------------------------ 261# 262# All remaining actions are intended for PETSc developers only. 263# PETSc users should not generally need to use these commands. 264# 265# See the users manual for how the tags files may be used from Emacs and Vi/Vim 266# 267alletags: 268 -@${PYTHON} lib/petsc/bin/maint/generateetags.py 269 -@find config -type f -name "*.py" |grep -v SCCS | xargs etags -o TAGS_PYTHON 270 271# obtain gtags from http://www.gnu.org/s/global/ 272allgtags: 273 -@find ${PETSC_DIR}/include ${PETSC_DIR}/src ${PETSC_DIR}/bin -regex '\(.*makefile\|.*\.\(cc\|hh\|cpp\|C\|hpp\|c\|h\|cu\|m\)$$\)' | grep -v ftn-auto | gtags -f - 274 275allfortranstubs: 276 -@${RM} -rf ${PETSC_ARCH}/include/petsc/finclude/ftn-auto/*-tmpdir 277 @${PYTHON} lib/petsc/bin/maint/generatefortranstubs.py ${BFORT} ${VERBOSE} 278 -@${PYTHON} lib/petsc/bin/maint/generatefortranstubs.py -merge ${VERBOSE} 279 -@${RM} -rf ${PETSC_ARCH}/include/petsc/finclude/ftn-auto/*-tmpdir 280deletefortranstubs: 281 -@find . -type d -name ftn-auto | xargs rm -rf 282cmakegen: 283 -@${PYTHON} config/cmakegen.py 284# 285# These are here for the target allci and allco, and etags 286# 287 288BMAKEFILES = conf/variables conf/rules conf/test 289SCRIPTS = lib/petsc/bin/maint/builddist lib/petsc/bin/maint/wwwman lib/petsc/bin/maint/xclude lib/petsc/bin/maint/bugReport.py lib/petsc/bin/maint/buildconfigtest lib/petsc/bin/maint/builddistlite \ 290 lib/petsc/bin/maint/buildtest lib/petsc/bin/maint/checkBuilds.py lib/petsc/bin/maint/copylognightly lib/petsc/bin/maint/copylognightly.tao lib/petsc/bin/maint/countfiles lib/petsc/bin/maint/findbadfiles \ 291 lib/petsc/bin/maint/fixinclude lib/petsc/bin/maint/getexlist lib/petsc/bin/maint/getpdflabels.py lib/petsc/bin/maint/helpindex.py lib/petsc/bin/maint/hosts.local lib/petsc/bin/maint/hosts.solaris \ 292 lib/petsc/bin/maint/lex.py lib/petsc/bin/maint/mapnameslatex.py lib/petsc/bin/maint/startnightly lib/petsc/bin/maint/startnightly.tao lib/petsc/bin/maint/submitPatch.py \ 293 lib/petsc/bin/maint/update-docs.py lib/petsc/bin/maint/wwwindex.py lib/petsc/bin/maint/xcludebackup lib/petsc/bin/maint/xcludecblas lib/petsc/bin/maint/zap lib/petsc/bin/maint/zapall \ 294 config/PETSc/Configure.py config/PETSc/Options.py \ 295 config/PETSc/utilities/*.py 296 297 298# Builds all the documentation - should be done every night 299alldoc: allcite allpdf alldoc1 alldoc2 docsetdate 300 301# Build just citations 302allcite: chk_loc deletemanualpages 303 -${PYTHON} lib/petsc/bin/maint/countpetsccits.py 304 -${OMAKE} ACTION=manualpages_buildcite tree_basic LOC=${LOC} 305 -@sed -e s%man+../%man+manualpages/% ${LOC}/docs/manualpages/manualpages.cit > ${LOC}/docs/manualpages/htmlmap 306 -@cat ${PETSC_DIR}/src/docs/mpi.www.index >> ${LOC}/docs/manualpages/htmlmap 307 308# Build just PDF manuals + prerequisites 309allpdf: chk_loc allcite 310 -cd src/docs/tex/manual; ${OMAKE} manual.pdf LOC=${LOC} 311 -cd src/docs/tex/manual; ${OMAKE} developers.pdf LOC=${LOC} 312 -cd src/docs/tao_tex/manual; ${OMAKE} manual.pdf LOC=${LOC} 313 314# Build just manual pages + prerequisites 315allmanpages: chk_loc allcite 316 -${OMAKE} ACTION=manualpages tree_basic LOC=${LOC} 317 318# Build just manual examples + prerequisites 319allmanexamples: chk_loc allmanpages 320 -${OMAKE} ACTION=manexamples tree_basic LOC=${LOC} 321 322# Build everything that goes into 'doc' dir except html sources 323alldoc1: chk_loc chk_concepts_dir allcite allmanpages allmanexamples 324 -${OMAKE} manimplementations LOC=${LOC} 325 -${PYTHON} lib/petsc/bin/maint/wwwindex.py ${PETSC_DIR} ${LOC} 326 -${OMAKE} manconcepts LOC=${LOC} 327 -${OMAKE} ACTION=getexlist tree_basic LOC=${LOC} 328 -${OMAKE} ACTION=exampleconcepts tree_basic LOC=${LOC} 329 -${PYTHON} lib/petsc/bin/maint/helpindex.py ${PETSC_DIR} ${LOC} 330 331# Builds .html versions of the source 332# html overwrites some stuff created by update-docs - hence this is done later. 333alldoc2: chk_loc 334 -${OMAKE} ACTION=html PETSC_DIR=${PETSC_DIR} alltree LOC=${LOC} 335 -${PYTHON} lib/petsc/bin/maint/update-docs.py ${PETSC_DIR} ${LOC} 336# 337# Makes links for all manual pages in $LOC/docs/manualpages/all 338allman: 339 @cd ${LOC}/docs/manualpages; rm -rf all ; mkdir all ; find * -type d -wholename all -prune -o -name index.html -prune -o -type f -name \*.html -exec ln -s -f ../{} all \; 340 341DOCSETDATE_PRUNE_LIST=-o -type f -wholename share/petsc/saws/linearsolveroptions.html -prune -o -type f -wholename tutorials/HandsOnExercise.html -prune -o -type f -wholename tutorials/TAOHandsOnExercise.html -prune 342 343# modify all generated html files and add in version number, date, canonical URL info. 344docsetdate: chk_petscdir 345 @echo "Updating generated html files with petsc version, date, canonical URL info";\ 346 version_release=`grep '^#define PETSC_VERSION_RELEASE ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 347 version_major=`grep '^#define PETSC_VERSION_MAJOR ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 348 version_minor=`grep '^#define PETSC_VERSION_MINOR ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 349 version_subminor=`grep '^#define PETSC_VERSION_SUBMINOR ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 350 if [ $${version_release} = 0 ]; then \ 351 petscversion=petsc-master; \ 352 export petscversion; \ 353 elif [ $${version_release} = 1 ]; then \ 354 petscversion=petsc-$${version_major}.$${version_minor}.$${version_subminor}; \ 355 export petscversion; \ 356 else \ 357 echo "Unknown PETSC_VERSION_RELEASE: $${version_release}"; \ 358 exit; \ 359 fi; \ 360 datestr=`git log -1 --pretty=format:%ci | cut -d ' ' -f 1`; \ 361 export datestr; \ 362 gitver=`git describe --match "v*"`; \ 363 export gitver; \ 364 find * -type d -wholename src/docs/website -prune -o -type d -wholename src/benchmarks/results -prune -o \ 365 -type d -wholename config/BuildSystem/docs/website -prune -o -type d -wholename include/web -prune -o \ 366 -type d -wholename 'arch-*' -prune -o -type d -wholename src/tops -prune -o -type d -wholename externalpackages -prune ${DOCSETDATE_PRUNE_LIST} -o \ 367 -type f -name \*.html \ 368 -exec perl -pi -e 's^(<body.*>)^$$1\n <div id=\"version\" align=right><b>$$ENV{petscversion} $$ENV{datestr}</b></div>\n <div id="bugreport" align=right><a href="mailto:petsc-maint\@mcs.anl.gov?subject=Typo or Error in Documentation &body=Please describe the typo or error in the documentation: $$ENV{petscversion} $$ENV{gitver} {} "><small>Report Typos and Errors</small></a></div>^i' {} \; \ 369 -exec perl -pi -e 's^(<head>)^$$1 <link rel="canonical" href="http://www.mcs.anl.gov/petsc/petsc-current/{}" />^i' {} \; ; \ 370 echo "Done fixing version number, date, canonical URL info" 371 372alldocclean: deletemanualpages allcleanhtml 373 374# Deletes man pages (HTML version) 375deletemanualpages: chk_loc 376 -@if [ -d ${LOC} -a -d ${LOC}/docs/manualpages ]; then \ 377 find ${LOC}/docs/manualpages -type f -name "*.html" -exec ${RM} {} \; ;\ 378 ${RM} ${LOC}/docs/exampleconcepts ;\ 379 ${RM} ${LOC}/docs/manconcepts ;\ 380 ${RM} ${LOC}/docs/manualpages/manualpages.cit ;\ 381 ${PYTHON} lib/petsc/bin/maint/update-docs.py ${PETSC_DIR} ${LOC} clean;\ 382 fi 383 384allcleanhtml: 385 -${OMAKE} ACTION=cleanhtml PETSC_DIR=${PETSC_DIR} alltree 386 387chk_concepts_dir: chk_loc 388 @if [ ! -d "${LOC}/docs/manualpages/concepts" ]; then \ 389 echo Making directory ${LOC}/docs/manualpages/concepts for library; ${MKDIR} ${LOC}/docs/manualpages/concepts; fi 390 391########################################################### 392# targets to build distribution and update docs 393########################################################### 394 395# Creates ${HOME}/petsc.tar.gz [and petsc-lite.tar.gz] 396dist: 397 ${PETSC_DIR}/lib/petsc/bin/maint/builddist ${PETSC_DIR} master 398 399# This target works only if you can do 'ssh petsc@login.mcs.anl.gov' 400# also copy the file over to ftp site. 401web-snapshot: 402 @if [ ! -f "${HOME}/petsc-master.tar.gz" ]; then \ 403 echo "~/petsc-master.tar.gz missing! cannot update petsc-master snapshot on mcs-web-site"; \ 404 else \ 405 echo "updating petsc-master snapshot on mcs-web-site"; \ 406 tmpdir=`mktemp -d -t petsc-doc.XXXXXXXX`; \ 407 cd $${tmpdir}; tar -xzf ${HOME}/petsc-master.tar.gz; \ 408 /usr/bin/rsync -e ssh -az --delete $${tmpdir}/petsc-master/ \ 409 petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc/petsc-master ;\ 410 /bin/cp -f /home/petsc/petsc-master.tar.gz /mcs/ftp/pub/petsc/petsc-master.tar.gz;\ 411 ${RM} -rf $${tmpdir} ;\ 412 fi 413 414# build the tarfile - and then update petsc-master snapshot on mcs-web-site 415update-web-snapshot: dist web-snapshot 416 417# This target updates website main pages 418update-web: 419 @cd ${PETSC_DIR}/src/docs; make PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} bib2html; \ 420 /usr/bin/rsync -az -C --exclude=documentation/index.html \ 421 --exclude=documentation/installation.html --exclude=download/index.html \ 422 ${PETSC_DIR}/src/docs/website/ petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc 423 @cd ${PETSC_DIR}/docs; /usr/bin/rsync -az developers.pdf petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc/developers/ 424 @cd ${PETSC_DIR}/src/docs/tex; /usr/bin/rsync -az petscapp.bib petsc.bib petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc/publications 425 426# 427# builds a single list of files for each PETSc library so they may all be built in parallel 428# without a recursive set of make calls 429createfastbuild: 430 cd src/vec; ${RM} -f files; /bin/echo -n "SOURCEC = " > files; make tree ACTION=sourcelist BASE_DIR=${PETSC_DIR}/src/vec 431 432########################################################### 433# 434# See script for details 435# 436gcov: 437 -@$(PYTHON) ${PETSC_DIR}/lib/petsc/bin/maint/gcov.py -run_gcov 438 439mergegcov: 440 -@$(PYTHON) ${PETSC_DIR}/lib/petsc/bin/maint/gcov.py -merge_gcov ${LOC} *.tar.gz 441 442######################## 443# 444# Create the include dependency graph (requires graphviz to be available) 445# 446includegraph: 447 -@${PETSC_DIR}/src/contrib/style/include-graph.sh includegraph.pdf 448 -@echo Include dependency graph written to includegraph.pdf 449 450# 451# ------------------------------------------------------------------------------- 452# 453# Some macros to check if the fortran interface is up-to-date. 454# 455countfortranfunctions: 456 -@cd ${PETSC_DIR}/src/fortran; egrep '^void' custom/*.c auto/*.c | \ 457 cut -d'(' -f1 | tr -s ' ' | cut -d' ' -f2 | uniq | egrep -v "(^$$|Petsc)" | \ 458 sed "s/_$$//" | sort > /tmp/countfortranfunctions 459 460countcfunctions: 461 -@grep PETSC_EXTERN ${PETSC_DIR}/include/*.h | grep "(" | tr -s ' ' | \ 462 cut -d'(' -f1 | cut -d' ' -f3 | grep -v "\*" | tr -s '\012' | \ 463 tr 'A-Z' 'a-z' | sort | uniq > /tmp/countcfunctions 464 465difffortranfunctions: countfortranfunctions countcfunctions 466 -@echo -------------- Functions missing in the fortran interface --------------------- 467 -@${DIFF} /tmp/countcfunctions /tmp/countfortranfunctions | grep "^<" | cut -d' ' -f2 468 -@echo ----------------- Functions missing in the C interface ------------------------ 469 -@${DIFF} /tmp/countcfunctions /tmp/countfortranfunctions | grep "^>" | cut -d' ' -f2 470 -@${RM} /tmp/countcfunctions /tmp/countfortranfunctions 471 472checkbadfortranstubs: 473 -@echo "=========================================" 474 -@echo "Functions with MPI_Comm as an Argument" 475 -@echo "=========================================" 476 -@cd ${PETSC_DIR}/src/fortran/auto; grep '^void' *.c | grep 'MPI_Comm' | \ 477 tr -s ' ' | tr -s ':' ' ' |cut -d'(' -f1 | cut -d' ' -f1,3 478 -@echo "=========================================" 479 -@echo "Functions with a String as an Argument" 480 -@echo "=========================================" 481 -@cd ${PETSC_DIR}/src/fortran/auto; grep '^void' *.c | grep 'char \*' | \ 482 tr -s ' ' | tr -s ':' ' ' |cut -d'(' -f1 | cut -d' ' -f1,3 483 -@echo "=========================================" 484 -@echo "Functions with Pointers to PETSc Objects as Argument" 485 -@echo "=========================================" 486 -@cd ${PETSC_DIR}/src/fortran/auto; \ 487 _p_OBJ=`grep _p_ ${PETSC_DIR}/include/*.h | tr -s ' ' | \ 488 cut -d' ' -f 3 | tr -s '\012' | grep -v '{' | cut -d'*' -f1 | \ 489 sed "s/_p_//g" | tr -s '\012 ' ' *|' ` ; \ 490 for OBJ in $$_p_OBJ; do \ 491 grep "$$OBJ \*" *.c | tr -s ' ' | tr -s ':' ' ' | \ 492 cut -d'(' -f1 | cut -d' ' -f1,3; \ 493 done 494 495checkpackagetests: 496 -@echo "Missing package tests" 497 -@cat config/examples/*.py > configexamples; pushd config/BuildSystem/config/packages/; packages=`ls *.py | sed "s/\\.py//g"`;popd; for i in $${packages}; do j=`echo $${i} | tr '[:upper:]' '[:lower:]'`; printf $${j} ; egrep "(with-$${j}|download-$${j})" configexamples | grep -v "=0" | wc -l ; done 498 -@echo "Missing download package tests" 499 -@cat config/examples/*.py > configexamples; pushd config/BuildSystem/config/packages/; packages=`grep -l "download " *.py | sed "s/\\.py//g"`;popd; for i in $${packages}; do j=`echo $${i} | tr '[:upper:]' '[:lower:]'`; printf $${j} ; egrep "(download-$${j})" configexamples | grep -v "=0" | wc -l ; done 500 501# 502# Automatically generates PETSc exercises in html from the tutorial examples. 503# 504# The introduction for each section is obtained from docs/manualpages-cite/header_${MANSEC} may be edited 505# (used also in introductions to the manual pages) 506# 507# DO NOT EDIT the *.htm files generated since they will be automatically replaced. 508# 509# Eventually the line below will replace the two cd in the rule below, it is just this way now for speed 510# -@${OMAKE} PETSC_DIR=${PETSC_DIR} pagemaker 511# 512exercises: 513 -@echo "=========================================" 514 -@echo "Generating HTML tutorial exercises" 515 -@${RM} docs/pageform.txt 516 -@echo "title=\"PETSc Exercises\"" > docs/pageform.txt 517 -@echo "access_title=Exercise Sections" >> docs/pageform.txt 518 -@echo "access_format=short" >> docs/pageform.txt 519 -@echo "startpage=../exercises/introduction.htm" >> docs/pageform.txt 520 -@echo "NONE title=\"Introduction\" command=link src=../exercises/introduction.htm" >> docs/pageform.txt 521 -@echo "Generating HTML for individual directories" 522 -@echo "=========================================" 523 -@${OMAKE} PETSC_DIR=${PETSC_DIR} ACTION=pagemaker tree 524 -@echo "Completed HTML for individual directories" 525 -@echo "NONE title=\"<HR>\" " >> docs/pageform.txt; 526 -@echo "NONE title=\"PETSc Documentation\" command=link src=../index.html target=replace" >> docs/pageform.txt 527 /home/MPI/class/mpiexmpl/maint/makepage.new -pageform=docs/pageform.txt -access_extra=/dev/null -outdir=docs/exercises 528 -@echo "=========================================" 529 530.PHONY: info info_h all build ranlib deletelibs allclean update \ 531 alletags etags etags_complete etags_noexamples etags_makefiles etags_examples etags_fexamples alldoc allmanualpages \ 532 allhtml allcleanhtml allci allco allrcslabel countfortranfunctions \ 533 start_configure configure_petsc configure_clean matlabbin install 534 535petscao : petscmat petscao.f90.h 536petscdm : petscksp petscdm.f90.h 537petscdraw : petsc petscdraw.f90.h 538petscis : petsc petscis.f90.h 539petscksp : petscpc petscksp.f90.h 540petsclog : petsc petsclog.f90.h 541petscmat : petscvec petscmat.f90.h 542petscmg : petscksp petscmg.f90.h 543petscpc : petscmat petscpc.f90.h 544petscsnes : petscksp petscsnes.f90.h 545petscsys : petsc petscsys.f90.h 546petscts : petscsnes petscts.f90.h 547petsc : petsc.f90.h 548petscvec : petscis petscvec.f90.h 549petscviewer : petsc petscviewer.f90.h 550petscmesh : petsc petscmesh.f90.h 551modules : petscao petscdm petscdraw petscis petscksp petsclog petscmat petscmg petscpc petscsnes petscsys petscts petsc petscvec petscviewer petscmesh 552