xref: /petsc/src/mat/impls/aij/seq/aijsell/aijsell.c (revision 597d2e731e074da4dd589204d1086286fba9f767)

/*
  Defines basic operations for the MATSEQAIJSELL matrix class.
  This class is derived from the MATAIJCLASS, but maintains a "shadow" copy
  of the matrix stored in MATSEQSELL format, which is used as appropriate for
  performing operations for which this format is more suitable.
*/

#include <../src/mat/impls/aij/seq/aij.h>
#include <../src/mat/impls/sell/seq/sell.h>

/* Logging support */
PetscLogEvent MAT_Convert;

typedef struct {
  Mat S; /* The SELL formatted "shadow" matrix. */
  PetscBool eager_shadow;
  PetscObjectState state; /* State of the matrix when shadow matrix was last constructed. */
} Mat_SeqAIJSELL;

PETSC_INTERN PetscErrorCode MatConvert_SeqAIJSELL_SeqAIJ(Mat A,MatType type,MatReuse reuse,Mat *newmat)
{
  /* This routine is only called to convert a MATAIJSELL to its base PETSc type, */
  /* so we will ignore 'MatType type'. */
  PetscErrorCode ierr;
  Mat            B        = *newmat;
  Mat_SeqAIJSELL *aijsell = (Mat_SeqAIJSELL*) A->spptr;

  PetscFunctionBegin;
  if (reuse == MAT_INITIAL_MATRIX) {
    ierr = MatDuplicate(A,MAT_COPY_VALUES,&B);CHKERRQ(ierr);
  }

  /* Reset the original function pointers. */
  B->ops->duplicate        = MatDuplicate_SeqAIJ;
  B->ops->assemblyend      = MatAssemblyEnd_SeqAIJ;
  B->ops->destroy          = MatDestroy_SeqAIJ;
  B->ops->mult             = MatMult_SeqAIJ;
  B->ops->multtranspose    = MatMultTranspose_SeqAIJ;
  B->ops->multadd          = MatMultAdd_SeqAIJ;
  B->ops->multtransposeadd = MatMultTransposeAdd_SeqAIJ;
  B->ops->sor              = MatSOR_SeqAIJ;

  ierr = PetscObjectComposeFunction((PetscObject)B,"MatConvert_seqaijsell_seqaij_C",NULL);CHKERRQ(ierr);
  ierr = PetscObjectComposeFunction((PetscObject)B,"MatMatMult_seqdense_seqaijsell_C",NULL);CHKERRQ(ierr);
  ierr = PetscObjectComposeFunction((PetscObject)B,"MatMatMultSymbolic_seqdense_seqaijsell_C",NULL);CHKERRQ(ierr);
  ierr = PetscObjectComposeFunction((PetscObject)B,"MatMatMultNumeric_seqdense_seqaijsell_C",NULL);CHKERRQ(ierr);
  ierr = PetscObjectComposeFunction((PetscObject)B,"MatPtAP_is_seqaijsell_C",NULL);CHKERRQ(ierr);

  if (reuse == MAT_INITIAL_MATRIX) aijsell = (Mat_SeqAIJSELL*)B->spptr;

  /* Clean up the Mat_SeqAIJSELL data structure. */
  if(aijsell->S) {
    ierr = MatDestroy(&aijsell->S);CHKERRQ(ierr);
  }
  ierr = PetscFree(B->spptr);CHKERRQ(ierr);

  /* Change the type of B to MATSEQAIJ. */
  ierr = PetscObjectChangeTypeName((PetscObject)B, MATSEQAIJ);CHKERRQ(ierr);

  *newmat = B;
  PetscFunctionReturn(0);
}

PetscErrorCode MatDestroy_SeqAIJSELL(Mat A)
{
  PetscErrorCode ierr;
  Mat_SeqAIJSELL  *aijsell = (Mat_SeqAIJSELL*) A->spptr;

  PetscFunctionBegin;

  /* If MatHeaderMerge() was used, then this SeqAIJSELL matrix will not have an
   * spptr pointer. */
  if (aijsell) {
    /* Clean up everything in the Mat_SeqAIJSELL data structure, then free A->spptr. */
    if (aijsell->S) {
      ierr = MatDestroy(&aijsell->S);CHKERRQ(ierr);
    }
    ierr = PetscFree(A->spptr);CHKERRQ(ierr);
  }

  /* Change the type of A back to SEQAIJ and use MatDestroy_SeqAIJ()
   * to destroy everything that remains. */
  ierr = PetscObjectChangeTypeName((PetscObject)A, MATSEQAIJ);CHKERRQ(ierr);
  /* Note that I don't call MatSetType().  I believe this is because that
   * is only to be called when *building* a matrix.  I could be wrong, but
   * that is how things work for the SuperLU matrix class. */
  ierr = MatDestroy_SeqAIJ(A);CHKERRQ(ierr);
  PetscFunctionReturn(0);
}

/* Build or update the shadow matrix if and only if needed.
 * We track the ObjectState to determine when this needs to be done. */
PETSC_INTERN PetscErrorCode MatSeqAIJSELL_build_shadow(Mat A)
{
  PetscErrorCode   ierr;
  Mat_SeqAIJSELL   *aijsell = (Mat_SeqAIJSELL*) A->spptr;
  PetscObjectState state;

  PetscFunctionBegin;

  ierr = PetscObjectStateGet((PetscObject)A,&state);CHKERRQ(ierr);
  if (aijsell->S && aijsell->state == state) {
    /* The existing shadow matrix is up-to-date, so simply exit. */
    PetscFunctionReturn(0);
  }

  ierr = PetscLogEventBegin(MAT_Convert,A,0,0,0);CHKERRQ(ierr);
  if (aijsell->S) {
    ierr = MatConvert_SeqAIJ_SeqSELL(A,MATSEQSELL,MAT_REUSE_MATRIX,&aijsell->S);CHKERRQ(ierr);
  } else {
    ierr = MatConvert_SeqAIJ_SeqSELL(A,MATSEQSELL,MAT_INITIAL_MATRIX,&aijsell->S);CHKERRQ(ierr);
  }
  ierr = PetscLogEventEnd(MAT_Convert,A,0,0,0);CHKERRQ(ierr);

  /* Record the ObjectState so that we can tell when the shadow matrix needs updating */
  ierr = PetscObjectStateGet((PetscObject)A,&aijsell->state);CHKERRQ(ierr);

  PetscFunctionReturn(0);
}

PetscErrorCode MatDuplicate_SeqAIJSELL(Mat A, MatDuplicateOption op, Mat *M)
{
  PetscErrorCode ierr;
  Mat_SeqAIJSELL *aijsell;
  Mat_SeqAIJSELL *aijsell_dest;

  PetscFunctionBegin;
  ierr = MatDuplicate_SeqAIJ(A,op,M);CHKERRQ(ierr);
  aijsell      = (Mat_SeqAIJSELL*) A->spptr;
  aijsell_dest = (Mat_SeqAIJSELL*) (*M)->spptr;
  ierr = PetscMemcpy(aijsell_dest,aijsell,sizeof(Mat_SeqAIJSELL));CHKERRQ(ierr);
  /* We don't duplicate the shadow matrix -- that will be constructed as needed. */
  aijsell_dest->S = NULL;
  if (aijsell->eager_shadow) {
    ierr = MatSeqAIJSELL_build_shadow(A);CHKERRQ(ierr);
  }
  PetscFunctionReturn(0);
}

PetscErrorCode MatAssemblyEnd_SeqAIJSELL(Mat A, MatAssemblyType mode)
{
  PetscErrorCode  ierr;
  Mat_SeqAIJ      *a = (Mat_SeqAIJ*)A->data;
  Mat_SeqAIJSELL  *aijsell;

  PetscFunctionBegin;
  if (mode == MAT_FLUSH_ASSEMBLY) PetscFunctionReturn(0);

  /* I disable the use of the inode routines so that the AIJSELL ones will be
   * used instead, but I wonder if it might make sense (and is feasible) to
   * use some of them. */
  a->inode.use = PETSC_FALSE;

  /* Since a MATSEQAIJSELL matrix is really just a MATSEQAIJ with some
   * extra information and some different methods, call the AssemblyEnd
   * routine for a MATSEQAIJ.
   * I'm not sure if this is the best way to do this, but it avoids
   * a lot of code duplication. */

  ierr = MatAssemblyEnd_SeqAIJ(A, mode);CHKERRQ(ierr);

  /* If the user has requested "eager" shadowing, create the SELL shadow matrix (if needed; the function checks).
   * (The default is to take a "lazy" approach, deferring this until something like MatMult() is called.) */
  aijsell = (Mat_SeqAIJSELL*) A->spptr;
  if (aijsell->eager_shadow) {
    ierr = MatSeqAIJSELL_build_shadow(A);CHKERRQ(ierr);
  }

  PetscFunctionReturn(0);
}

PetscErrorCode MatMult_SeqAIJSELL(Mat A,Vec xx,Vec yy)
{
  Mat_SeqAIJSELL    *aijsell=(Mat_SeqAIJSELL*)A->spptr;
  PetscErrorCode    ierr;

  PetscFunctionBegin;

  ierr = MatSeqAIJSELL_build_shadow(A);CHKERRQ(ierr);
  ierr = MatMult_SeqSELL(aijsell->S,xx,yy);CHKERRQ(ierr);

  PetscFunctionReturn(0);
}

PetscErrorCode MatMultTranspose_SeqAIJSELL(Mat A,Vec xx,Vec yy)
{
  Mat_SeqAIJSELL    *aijsell=(Mat_SeqAIJSELL*)A->spptr;
  PetscErrorCode    ierr;

  PetscFunctionBegin;

  ierr = MatSeqAIJSELL_build_shadow(A);CHKERRQ(ierr);
  ierr = MatMultTranspose_SeqSELL(aijsell->S,xx,yy);CHKERRQ(ierr);

  PetscFunctionReturn(0);
}

PetscErrorCode MatMultAdd_SeqAIJSELL(Mat A,Vec xx,Vec yy,Vec zz)
{
  Mat_SeqAIJSELL    *aijsell=(Mat_SeqAIJSELL*)A->spptr;
  PetscErrorCode    ierr;

  PetscFunctionBegin;

  ierr = MatSeqAIJSELL_build_shadow(A);CHKERRQ(ierr);
  ierr = MatMultAdd_SeqSELL(aijsell->S,xx,yy,zz);CHKERRQ(ierr);

  PetscFunctionReturn(0);
}

PetscErrorCode MatMultTransposeAdd_SeqAIJSELL(Mat A,Vec xx,Vec yy,Vec zz)
{
  Mat_SeqAIJSELL    *aijsell=(Mat_SeqAIJSELL*)A->spptr;
  PetscErrorCode    ierr;

  PetscFunctionBegin;

  ierr = MatSeqAIJSELL_build_shadow(A);CHKERRQ(ierr);
  ierr = MatMultTransposeAdd_SeqSELL(aijsell->S,xx,yy,zz);CHKERRQ(ierr);

  PetscFunctionReturn(0);
}

PetscErrorCode MatSOR_SeqAIJSELL(Mat A,Vec bb,PetscReal omega,MatSORType flag,PetscReal fshift,PetscInt its,PetscInt lits,Vec xx)
{
  Mat_SeqAIJSELL    *aijsell=(Mat_SeqAIJSELL*)A->spptr;
  PetscErrorCode    ierr;

  PetscFunctionBegin;

  ierr = MatSeqAIJSELL_build_shadow(A);CHKERRQ(ierr);
  ierr = MatSOR_SeqSELL(aijsell->S,bb,omega,flag,fshift,its,lits,xx);CHKERRQ(ierr);

  PetscFunctionReturn(0);
}

/* This function prototype is needed in MatConvert_SeqAIJ_SeqAIJSELL(), below. */
PETSC_INTERN PetscErrorCode MatPtAP_IS_XAIJ(Mat,Mat,MatReuse,PetscReal,Mat*);

/* MatConvert_SeqAIJ_SeqAIJSELL converts a SeqAIJ matrix into a
 * SeqAIJSELL matrix.  This routine is called by the MatCreate_SeqAIJSELL()
 * routine, but can also be used to convert an assembled SeqAIJ matrix
 * into a SeqAIJSELL one. */
PETSC_INTERN PetscErrorCode MatConvert_SeqAIJ_SeqAIJSELL(Mat A,MatType type,MatReuse reuse,Mat *newmat)
{
  PetscErrorCode ierr;
  Mat            B = *newmat;
  Mat_SeqAIJ     *b;
  Mat_SeqAIJSELL *aijsell;
  PetscBool      set;
  PetscBool      sametype;

  PetscFunctionBegin;
  if (reuse == MAT_INITIAL_MATRIX) {
    ierr = MatDuplicate(A,MAT_COPY_VALUES,&B);CHKERRQ(ierr);
  }

  ierr = PetscObjectTypeCompare((PetscObject)A,type,&sametype);CHKERRQ(ierr);
  if (sametype) PetscFunctionReturn(0);

  ierr     = PetscNewLog(B,&aijsell);CHKERRQ(ierr);
  b        = (Mat_SeqAIJ*) B->data;
  B->spptr = (void*) aijsell;

  /* Disable use of the inode routines so that the AIJSELL ones will be used instead.
   * This happens in MatAssemblyEnd_SeqAIJSELL as well, but the assembly end may not be called, so set it here, too.
   * As noted elsewhere, I wonder if it might make sense and be feasible to use some of the inode routines. */
  b->inode.use = PETSC_FALSE;

  /* Set function pointers for methods that we inherit from AIJ but override.
   * We also parse some command line options below, since those determine some of the methods we point to. */
  B->ops->duplicate        = MatDuplicate_SeqAIJSELL;
  B->ops->assemblyend      = MatAssemblyEnd_SeqAIJSELL;
  B->ops->destroy          = MatDestroy_SeqAIJSELL;

  aijsell->S = NULL;
  aijsell->eager_shadow = PETSC_FALSE;

  /* Parse command line options. */
  ierr = PetscOptionsBegin(PetscObjectComm((PetscObject)A),((PetscObject)A)->prefix,"AIJSELL Options","Mat");CHKERRQ(ierr);
  ierr = PetscOptionsBool("-mat_aijsell_eager_shadow","Eager Shadowing","None",(PetscBool)aijsell->eager_shadow,(PetscBool*)&aijsell->eager_shadow,&set);CHKERRQ(ierr);
  ierr = PetscOptionsEnd();CHKERRQ(ierr);

  /* If A has already been assembled and eager shadowing is specified, build the shadow matrix. */
  if (A->assembled && aijsell->eager_shadow) {
    ierr = MatSeqAIJSELL_build_shadow(A);CHKERRQ(ierr);
  }

  B->ops->mult             = MatMult_SeqAIJSELL;
  B->ops->multtranspose    = MatMultTranspose_SeqAIJSELL;
  B->ops->multadd          = MatMultAdd_SeqAIJSELL;
  B->ops->multtransposeadd = MatMultTransposeAdd_SeqAIJSELL;
  B->ops->sor              = MatSOR_SeqAIJSELL;

  ierr = PetscObjectComposeFunction((PetscObject)B,"MatConvert_seqaijsell_seqaij_C",MatConvert_SeqAIJSELL_SeqAIJ);CHKERRQ(ierr);
  ierr = PetscObjectComposeFunction((PetscObject)B,"MatMatMult_seqdense_seqaijsell_C",MatMatMult_SeqDense_SeqAIJ);CHKERRQ(ierr);
  ierr = PetscObjectComposeFunction((PetscObject)B,"MatMatMultSymbolic_seqdense_seqaijsell_C",MatMatMultSymbolic_SeqDense_SeqAIJ);CHKERRQ(ierr);
  ierr = PetscObjectComposeFunction((PetscObject)B,"MatMatMultNumeric_seqdense_seqaijsell_C",MatMatMultNumeric_SeqDense_SeqAIJ);CHKERRQ(ierr);
  ierr = PetscObjectComposeFunction((PetscObject)B,"MatPtAP_is_seqaijsell_C",MatPtAP_IS_XAIJ);CHKERRQ(ierr);

  ierr    = PetscObjectChangeTypeName((PetscObject)B,MATSEQAIJSELL);CHKERRQ(ierr);
  *newmat = B;
  PetscFunctionReturn(0);
}

/*@C
   MatCreateSeqAIJSELL - Creates a sparse matrix of type SEQAIJSELL.
   This type inherits from AIJ and is largely identical, but keeps a "shadow"
   copy of the matrix in SEQSELL format, which is used when performing
   operations for which this format is more suitable.

   Collective on MPI_Comm

   Input Parameters:
+  comm - MPI communicator, set to PETSC_COMM_SELF
.  m - number of rows
.  n - number of columns
.  nz - number of nonzeros per row (same for all rows)
-  nnz - array containing the number of nonzeros in the various rows
         (possibly different for each row) or NULL

   Output Parameter:
.  A - the matrix

   Options Database Keys:
.  -mat_aijsell_eager_shadow - Construct shadow matrix upon matrix assembly; default is to take a "lazy" approach, performing this step the first time the matrix is applied

   Notes:
   If nnz is given then nz is ignored

   Level: intermediate

.keywords: matrix, sparse, parallel

.seealso: MatCreate(), MatCreateMPIAIJSELL(), MatSetValues()
@*/
PetscErrorCode  MatCreateSeqAIJSELL(MPI_Comm comm,PetscInt m,PetscInt n,PetscInt nz,const PetscInt nnz[],Mat *A)
{
  PetscErrorCode ierr;

  PetscFunctionBegin;
  ierr = MatCreate(comm,A);CHKERRQ(ierr);
  ierr = MatSetSizes(*A,m,n,m,n);CHKERRQ(ierr);
  ierr = MatSetType(*A,MATSEQAIJSELL);CHKERRQ(ierr);
  ierr = MatSeqAIJSetPreallocation_SeqAIJ(*A,nz,nnz);CHKERRQ(ierr);
  PetscFunctionReturn(0);
}

PETSC_EXTERN PetscErrorCode MatCreate_SeqAIJSELL(Mat A)
{
  PetscErrorCode ierr;

  PetscFunctionBegin;
  ierr = MatSetType(A,MATSEQAIJ);CHKERRQ(ierr);
  ierr = MatConvert_SeqAIJ_SeqAIJSELL(A,MATSEQAIJSELL,MAT_INPLACE_MATRIX,&A);CHKERRQ(ierr);
  PetscFunctionReturn(0);
}