Merge branch 'for-7.1-printf-kunit-build' into for-linus

Merge branch 'next' into for-linus

Prepare input updates for 7.1 merge window.

Merge tag 'v7.0-rc3' into next

Sync up with the mainline to brig up the latest changes, specifically
changes to ALPS driver.

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 7.00-rc3. Important ahead GPU SVM merging THP
support.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>

Merge drm/drm-next into drm-intel-next

Sync with v7.0-rc1 which contains a few treewide changes affecting i915.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Let's merge 7.0-rc1 to start the new drm-misc-next window

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-fixes into drm-misc-fixes

7.0-rc1 was just released, let's merge it to kick the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'nand/for-7.0' into mtd/next

SPI NAND

- The major feature this release is the support for octal DTR
modes (8D-8D-8D).
- There has been as well a series of conversion to scoped for each

Merge tag 'nand/for-7.0' into mtd/next

SPI NAND

- The major feature this release is the support for octal DTR
modes (8D-8D-8D).
- There has been as well a series of conversion to scoped for each OF
child loops.
- Support for Foresee F35SQB002G chips has been added.

Other changes are small fixes.

show more ...

Merge tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:
"DT core:

- Sync dtc/libfdt with upstream v1.7.2-62-ga26ef64

Merge tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:
"DT core:

- Sync dtc/libfdt with upstream v1.7.2-62-ga26ef6400bd8

- Add a for_each_compatible_node_scoped() loop and convert users in
cpufreq, dmaengine, clk, cdx, powerpc and Arm

- Simplify of/platform.c with scoped loop helpers

- Add fw_devlink tracking for "mmc-pwrseq"

- Optimize fw_devlink callback code size for pinctrl-N properties

- Replace strcmp_suffix() with strends()

DT bindings:

- Support building single binding targets

- Convert google,goldfish-fb, cznic,turris-mox-rwtm, ti,prm-inst

- Add bindings for Freescale AVIC, Realtek RTD1xxx system
controllers, Microchip 25AA010A EEPROM, OnSemi FIN3385, IEI
WT61P803 PUZZLE, Delta Electronics DPS-800-AB power supply,
Infineon IR35221 Digital Multi-phase Controller, Infineon PXE1610
Digital Dual Output 6+1 VR12.5 & VR13 CPU Controller,
socionext,uniphier-smpctrl, and xlnx,zynqmp-firmware

- Lots of trivial binding fixes to address warnings in DTS files.
These are mostly for arm64 platforms which is getting closer to be
warning free. Some public shaming has helped.

- Fix I2C bus node names in examples

- Drop obsolete brcm,vulcan-soc binding

- Drop unreferenced binding headers"

* tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (60 commits)
dt-bindings: interrupt-controller: Add compatiblie string fsl,imx(1|25|27|31|35)-avic
dt-bindings: soc: imx: add fsl,aips and fsl,emi compatible strings
dt-bindings: display: bridge: lt8912b: Drop reset gpio requirement
dt-bindings: firmware: fsl,scu: Mark multi-channel MU layouts as deprecated
cpufreq: s5pv210: Simplify with scoped for each OF child loop
dmaengine: fsl_raid: Simplify with scoped for each OF child loop
clk: imx: imx31: Simplify with scoped for each OF child loop
clk: imx: imx27: Simplify with scoped for each OF child loop
cdx: Use mutex guard to simplify error handling
cdx: Simplify with scoped for each OF child loop
powerpc/wii: Simplify with scoped for each OF child loop
powerpc/fsp2: Simplify with scoped for each OF child loop
ARM: exynos: Simplify with scoped for each OF child loop
ARM: at91: Simplify with scoped for each OF child loop
of: Add for_each_compatible_node_scoped() helper
dt-bindings: Fix emails with spaces or missing brackets
scripts/dtc: Update to upstream version v1.7.2-62-ga26ef6400bd8
dt-bindings: crypto: inside-secure,safexcel: Mandate only ring IRQs
dt-bindings: crypto: inside-secure,safexcel: Add SoC compatibles
of: reserved_mem: Fix placement of __free() annotation
...

show more ...

Merge branch 'for-6.20/sony' into for-linus

- Support for Rock band 4 PS4 and PS5 guitars (Rosalie Wanders)

Merge drm/drm-next into drm-misc-next

Backmerging to get bug fixes from v6.19-rc7.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

of: Add for_each_compatible_node_scoped() helper

Just like looping through children and available children, add a scoped
helper for for_each_compatible_node() so error paths can drop
of_node_put() l

of: Add for_each_compatible_node_scoped() helper

Just like looping through children and available children, add a scoped
helper for for_each_compatible_node() so error paths can drop
of_node_put() leading to simpler code.

Suggested-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260109-of-for-each-compatible-scoped-v3-1-c22fa2c0749a@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

show more ...

Merge branch 'v6.19-rc8'

Update to avoid conflicts with /urgent patches.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge tag 'tags/spi-octal-dtr' into nand/next

spi: Octal DTR support

This series adds support for 8D-8D-8D in SPI NAND, which can already be
leveraged without any SPI changes as controllers already

Merge tag 'tags/spi-octal-dtr' into nand/next

spi: Octal DTR support

This series adds support for 8D-8D-8D in SPI NAND, which can already be
leveraged without any SPI changes as controllers already have this
support for some SPI NOR devices.

Among the few spi-mem patches, they are needed for building the SPI NAND
changes (especially the ODTR introduction at the end) and therefore an
immutable tag will be needed for merging in the MTD tree (unless all the
series goes through MTD directly ofc).

show more ...

Merge tag 'v6.19-rc1' into msm-next

Merge Linux 6.19-rc1 in order to catch up with other changes (e.g. UBWC
config database defining UBWC_6).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.q

Merge tag 'v6.19-rc1' into msm-next

Merge Linux 6.19-rc1 in order to catch up with other changes (e.g. UBWC
config database defining UBWC_6).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Upstream is on rc5, we're still on rc1. No luck in hoping for a
fast-forward, time to backmerge!

Signed-off-by: Maarten Lankhorst <d

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Upstream is on rc5, we're still on rc1. No luck in hoping for a
fast-forward, time to backmerge!

Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>

show more ...

Merge tag 'v6.19-rc5' into drm-rust-next

We need the drm-rust fixes from -rc5 in here for nova-core to build on
top of.

Signed-off-by: Danilo Krummrich <dakr@kernel.org>

Merge branch 'for-linus' into for-next

Pull 6.19-devel branch for applying cirrus scodec test patches.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-fix-v6.19-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.19

A moderately large collection of fixes since I missed a week, pl

Merge tag 'asoc-fix-v6.19-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.19

A moderately large collection of fixes since I missed a week, plus a few
new device IDs and quirks. It's all fairly minor, including a bunch of
work on the device tree bindings fixes which have no runtime effect.

There's one SoundWire change here exporting a symbol which was required
for a fix to the ASoC SoundWire code.

show more ...

regulator: core: allow regulator_register() with

Merge series from André Draszik <andre.draszik@linaro.org>:

With these attached patches it becomes possible again to support
hardware designs with m

regulator: core: allow regulator_register() with

Merge series from André Draszik <andre.draszik@linaro.org>:

With these attached patches it becomes possible again to support
hardware designs with multiple PMICs where individual rails of each act
as required supplies for rails of the other (due to the latter being
e.g. always-on), and vice-versa.

Google Pixel 6 and 6 Pro (oriole and raven) are examples of such
designs.

Rather than returning -EPORBE_DEFER in regulator_register() when
set_machine_constraints() fails with -EPROBE_DEFER (due to missing
required supplies), we still allow rail registration and try to
reresolve supplies each time a new rail gets registered.

This is implemented using a bus (regulator bus), which allows the core
to reresolve supplies for regulators that still need them whenever new
regulators (i.e. devices) are added.

Using a bus also solves existing problems around late resolution of
supplies as mentioned in the commit message introducing that bus.

The series starts with a few bug fixes and the last two commits
implement the changes mentioned above, but do depend on the bug fixes.

show more ...

Merge tag 'v6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-next

Linux 6.19-rc5

Pull in upstream shared GPIO fixes into the v7.0 branch.

Merge drm/drm-next into drm-xe-next

Bring some drm-scheduler patches to Xe.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

ASoC: codecs: wsa88xx: fix codec initialisation

Merge series from Johan Hovold <johan@kernel.org>:

The soundwire update_status() callback may be called multiple times with
the same ATTACHED status

ASoC: codecs: wsa88xx: fix codec initialisation

Merge series from Johan Hovold <johan@kernel.org>:

The soundwire update_status() callback may be called multiple times with
the same ATTACHED status but initialisation should only be done when
transitioning from UNATTACHED to ATTACHED.

This series fixes the Qualcomm wsa88xx codec drivers that do unnecessary
reinitialisation or potentially fail to initialise at all.

Included is also a related clean up suppressing a related codec variant
printk.

show more ...

spi: st: use pm_ptr and remove __maybe_unused

Merge series from Alain Volmat <alain.volmat@foss.st.com>:

Update ST related SPI drivers in order to remove the __maybe_unused
statements on pm related

spi: st: use pm_ptr and remove __maybe_unused

Merge series from Alain Volmat <alain.volmat@foss.st.com>:

Update ST related SPI drivers in order to remove the __maybe_unused
statements on pm related functions thanks to the usage of pm_ptr.

show more ...

Support effective VF bandwidth query in LAG mode

Currently, mlx5 driver exposes only the parent function's speed to VFs,
providing no way to query the actual effective bandwidth in LAG and
MPESW con

Support effective VF bandwidth query in LAG mode

Currently, mlx5 driver exposes only the parent function's speed to VFs,
providing no way to query the actual effective bandwidth in LAG and
MPESW configurations. This limitation prevents userspace and
upper-layer software from obtaining accurate bandwidth information,
which impacts traffic scheduling decisions.

This series addresses this by:

1. Adding mlx5 internal logic to calculate and propagate the effective
aggregated LAG speed to all attached vports. The vport speeds are
dynamically updated when LAG member link states change.

2. Extending RDMA core with a new ib_query_port_speed() verb and an
IB_EVENT_DEVICE_SPEED_CHANGE async event. These interfaces expose
the effective port speed to userspace, supporting speeds that are
not expressible as IB speed * width (where width is 2^n).

This series enables userspace applications to query the effective
port speed and receive notifications on speed changes in real-time.
In LAG configurations, each mlx5 port reports the aggregated bandwidth
of all active LAG members.

Signed-off-by: Leon Romanovsky <leon@kernel.org>

show more ...