Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into next

Bring in changes removing support for platform data from matrix-keypad
driver.

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be a

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to the state of v6.11-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'linus' into x86/mm

Bring x86 and selftests up to date

Merge drm/drm-next into drm-intel-next

Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'v6.11-rc1' into for-6.12

Linux 6.11-rc1

Merge drm/drm-fixes into drm-misc-fixes

Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'v6.11-rc1' into clk-meson-next

Linux 6.11-rc1

Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem a

Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.

Core & protocols:

- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT

- Use flex array for netdevice priv area, ensure its cache alignment

- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful

- Support scheduling transmission of packets based on CLOCK_TAI

- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets

- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address

- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync

- Improve TCP compliance with RFC 9293 for simultaneous connect()

- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it

- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled

- Introduce IPPROTO_SMC for selecting SMC when socket is created

- Allow UDP GSO transmit from devices with no checksum offload

- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding

- nf_tables: shrink memory consumption for transaction objects

Things we sprinkled into general kernel code:

- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]

- Add IRQ information in sysfs for auxiliary bus

- Introduce guard definition for local_lock

- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures

BPF:

- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered

- Add new kfuncs for a generic, open-coded bits iterator

- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head

- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules

- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs

- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter

- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs

Driver API:

- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose

- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits

- Track additional RSS contexts in the core, make sure configuration
changes don't break them

- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths

- Support updating firmware on SFP modules

Tests and tooling:

- mptcp: use net/lib.sh to manage netns

- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints

- openvswitch: make test self-contained (don't depend on OvS CLI
tools)

Drivers:

- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters

- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration

- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations

- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver

- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status

- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)

- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"

* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...

show more ...

net: psample: fix flag being set in wrong skb

A typo makes PSAMPLE_ATTR_SAMPLE_RATE netlink flag be added to the wrong
sk_buff.

Fix the error and make the input sk_buff pointer "const" so that it
d

net: psample: fix flag being set in wrong skb

A typo makes PSAMPLE_ATTR_SAMPLE_RATE netlink flag be added to the wrong
sk_buff.

Fix the error and make the input sk_buff pointer "const" so that it
doesn't happen again.

Acked-by: Eelco Chaudron <echaudro@redhat.com>
Fixes: 7b1b2b60c63f ("net: psample: allow using rate as probability")
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20240710171004.2164034-1-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge branch 'net-openvswitch-add-sample-multicasting'

Adrian Moreno says:

====================
net: openvswitch: Add sample multicasting.

** Background **
Currently, OVS supports several packet s

Merge branch 'net-openvswitch-add-sample-multicasting'

Adrian Moreno says:

====================
net: openvswitch: Add sample multicasting.

** Background **
Currently, OVS supports several packet sampling mechanisms (sFlow,
per-bridge IPFIX, per-flow IPFIX). These end up being translated into a
userspace action that needs to be handled by ovs-vswitchd's handler
threads only to be forwarded to some third party application that
will somehow process the sample and provide observability on the
datapath.

A particularly interesting use-case is controller-driven
per-flow IPFIX sampling where the OpenFlow controller can add metadata
to samples (via two 32bit integers) and this metadata is then available
to the sample-collecting system for correlation.

** Problem **
The fact that sampled traffic share netlink sockets and handler thread
time with upcalls, apart from being a performance bottleneck in the
sample extraction itself, can severely compromise the datapath,
yielding this solution unfit for highly loaded production systems.

Users are left with little options other than guessing what sampling
rate will be OK for their traffic pattern and system load and dealing
with the lost accuracy.

Looking at available infrastructure, an obvious candidated would be
to use psample. However, it's current state does not help with the
use-case at stake because sampled packets do not contain user-defined
metadata.

** Proposal **
This series is an attempt to fix this situation by extending the
existing psample infrastructure to carry a variable length
user-defined cookie.

The main existing user of psample is tc's act_sample. It is also
extended to forward the action's cookie to psample.

Finally, a new OVS action (OVS_SAMPLE_ATTR_PSAMPLE) is created.
It accepts a group and an optional cookie and uses psample to
multicast the packet and the metadata.
====================

Link: https://patch.msgid.link/20240704085710.353845-1-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: psample: allow using rate as probability

Although not explicitly documented in the psample module itself, the
definition of PSAMPLE_ATTR_SAMPLE_RATE seems inherited from act_sample.

Quoting tc

net: psample: allow using rate as probability

Although not explicitly documented in the psample module itself, the
definition of PSAMPLE_ATTR_SAMPLE_RATE seems inherited from act_sample.

Quoting tc-sample(8):
"RATE of 100 will lead to an average of one sampled packet out of every
100 observed."

With this semantics, the rates that we can express with an unsigned
32-bits number are very unevenly distributed and concentrated towards
"sampling few packets".
For example, we can express a probability of 2.32E-8% but we
cannot express anything between 100% and 50%.

For sampling applications that are capable of sampling a decent
amount of packets, this sampling rate semantics is not very useful.

Add a new flag to the uAPI that indicates that the sampling rate is
expressed in scaled probability, this is:
- 0 is 0% probability, no packets get sampled.
- U32_MAX is 100% probability, all packets get sampled.

Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Link: https://patch.msgid.link/20240704085710.353845-5-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: psample: add user cookie

Add a user cookie to the sample metadata so that sample emitters can
provide more contextual information to samples.

If present, send the user cookie in a new attribut

net: psample: add user cookie

Add a user cookie to the sample metadata so that sample emitters can
provide more contextual information to samples.

If present, send the user cookie in a new attribute:
PSAMPLE_ATTR_USER_COOKIE.

Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Link: https://patch.msgid.link/20240704085710.353845-2-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.17 merge window.

Merge branch 'reset/of-get-optional-exclusive' of git://git.pengutronix.de/pza/linux into timers/drivers/next

"Add optional variant of of_reset_control_get_exclusive(). If the
requested reset is not

Merge branch 'reset/of-get-optional-exclusive' of git://git.pengutronix.de/pza/linux into timers/drivers/next

"Add optional variant of of_reset_control_get_exclusive(). If the
requested reset is not specified in the device tree, this function
returns NULL instead of an error."

This dependency is needed for the Generic Timer Module (a.k.a OSTM)
support for RZ/G2L.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

show more ...

Merge tag 'v5.15' into next

Sync up with the mainline to get the latest APIs and DT bindings.

Merge branch 'pruss-fix' into fixes

Merge in a fix for pruss reset issue caused by enabling pruss for am335x.

Merge tag 'v5.15-rc2' into spi-5.15

Linux 5.15-rc2

Merge drm/drm-next into drm-intel-next

Catch-up on 5.15-rc1 and sync with drm-intel-gt-next
to prepare the PXP topic branch.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-intel-gt-next

Close the divergence which has caused patches not to apply and
have a solid baseline for the PXP patches that Rodrigo will send
a topic branch PR for.

Sign

Merge drm/drm-next into drm-intel-gt-next

Close the divergence which has caused patches not to apply and
have a solid baseline for the PXP patches that Rodrigo will send
a topic branch PR for.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Kickstart new drm-misc-next cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge branch 'next' into for-linus

Prepare input updates for 5.15 merge window.