Merge branch 'for-7.1-printf-kunit-build' into for-linus

Merge branch 'next' into for-linus

Prepare input updates for 7.1 merge window.

Merge branch 'for-7.1/core-v2' into for-linus

- fixed handling of 0-sized reports (Dmitry Torokhov)
- convert core code to __free() (Dmitry Torokhov)
- support for multiple batteries per HID device

Merge branch 'for-7.1/core-v2' into for-linus

- fixed handling of 0-sized reports (Dmitry Torokhov)
- convert core code to __free() (Dmitry Torokhov)
- support for multiple batteries per HID device (Lucas Zampieri)

show more ...

Merge tag 'v7.0-rc3' into next

Sync up with the mainline to brig up the latest changes, specifically
changes to ALPS driver.

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 7.00-rc3. Important ahead GPU SVM merging THP
support.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>

Merge drm/drm-next into drm-intel-next

Sync with v7.0-rc1 which contains a few treewide changes affecting i915.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Let's merge 7.0-rc1 to start the new drm-misc-next window

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-fixes into drm-misc-fixes

7.0-rc1 was just released, let's merge it to kick the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf before 7.0-rc1

Cross-merge BPF and other fixes after downstream PR.

No conflicts.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Merge tag 'spdx-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx

Pull SPDX updates from Greg KH:
"Here are two small changes that add some missing SPDX license lines to
some

Merge tag 'spdx-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx

Pull SPDX updates from Greg KH:
"Here are two small changes that add some missing SPDX license lines to
some core kernel files. These are:

- adding SPDX license lines to kdb files

- adding SPDX license lines to the remaining kernel/ files

Both of these have been in linux-next for a while with no reported
issues"

* tag 'spdx-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
kernel: debug: Add SPDX license ids to kdb files
kernel: add SPDX-License-Identifier lines

show more ...

kernel: debug: Add SPDX license ids to kdb files

Add GPL-2.0 license id to some files related to kdb and kgdb,
replacing references to GPL or COPYING.

These files were introduced into the kernel in

kernel: debug: Add SPDX license ids to kdb files

Add GPL-2.0 license id to some files related to kdb and kgdb,
replacing references to GPL or COPYING.

These files were introduced into the kernel in 2008 and 2010.

Signed-off-by: Tim Bird <tim.bird@sony.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge tag 'v5.5-rc4' into locking/kcsan, to resolve conflicts

Conflicts:
init/main.c
lib/Kconfig.debug

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge drm-intel-next-queued into gvt-next

Backmerge to pull in
https://patchwork.freedesktop.org/patch/353621/?series=73544&rev=1

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Merge branch 'next' into for-linus

Prepare input updates for 5.6 merge window.

Merge tag 'v5.5-rc5' into next

Sync up with mainline to get SPI "delay" API changes.

Merge drm/drm-next into drm-misc-next

Requested, and we need v5.5-rc1 backported as our current branch is still based on v5.4.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Merge drm/drm-next into drm-intel-next-queued

Sync up with v5.5-rc1 to get the updated lock_release() API among other
things. Fix the conflict reported by Stephen Rothwell [1].

[1] http://lore.kern

Merge drm/drm-next into drm-intel-next-queued

Sync up with v5.5-rc1 to get the updated lock_release() API among other
things. Fix the conflict reported by Stephen Rothwell [1].

[1] http://lore.kernel.org/r/20191210093957.5120f717@canb.auug.org.au

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge tag 'v5.5-rc1' into core/kprobes, to resolve conflicts

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'linus' into sched/urgent, to pick up the latest before merging new patches

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge mainline/master into arm/fixes

This brings in the mainline tree right after armsoc contents was merged
this release cycle, so that we can re-run savedefconfig, etc.

Signed-off-by: Olof Johans

Merge mainline/master into arm/fixes

This brings in the mainline tree right after armsoc contents was merged
this release cycle, so that we can re-run savedefconfig, etc.

Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

Merge tag 'kgdb-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux

Pull kgdb updates from Daniel Thompson:
"The major change here is the work from Douglas Anderson that reworks

Merge tag 'kgdb-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux

Pull kgdb updates from Daniel Thompson:
"The major change here is the work from Douglas Anderson that reworks
the way kdb stack traces are handled on SMP systems. The effect is to
allow all CPUs to issue their stack trace which reduced the need for
architecture specific code to support stack tracing.

Also included are general of clean ups from Doug and myself:

- Remove some unused variables or arguments.

- Tidy up the kdb escape handling code and fix a couple of odd corner
cases.

- Better ignore escape characters that do not form part of an escape
sequence. This mostly benefits vi users since they are most likely
to press escape as a nervous habit but it won't harm anyone else"

* tag 'kgdb-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kdb: Tweak escape handling for vi users
kdb: Improve handling of characters from different input sources
kdb: Remove special case logic from kdb_read()
kdb: Simplify code to fetch characters from console
kdb: Tidy up code to handle escape sequences
kdb: Avoid array subscript warnings on non-SMP builds
kdb: Fix stack crawling on 'running' CPUs that aren't the master
kdb: Fix "btc <cpu>" crash if the CPU didn't round up
kdb: Remove unused "argcount" param from kdb_bt1(); make btaprompt bool
kgdb: Remove unused DCPU_SSTEP definition

show more ...

kdb: Fix stack crawling on 'running' CPUs that aren't the master

In kdb when you do 'btc' (back trace on CPU) it doesn't necessarily
give you the right info. Specifically on many architectures
(inc

kdb: Fix stack crawling on 'running' CPUs that aren't the master

In kdb when you do 'btc' (back trace on CPU) it doesn't necessarily
give you the right info. Specifically on many architectures
(including arm64, where I tested) you can't dump the stack of a
"running" process that isn't the process running on the current CPU.
This can be seen by this:

echo SOFTLOCKUP > /sys/kernel/debug/provoke-crash/DIRECT
# wait 2 seconds
<sysrq>g

Here's what I see now on rk3399-gru-kevin. I see the stack crawl for
the CPU that handled the sysrq but everything else just shows me stuck
in __switch_to() which is bogus:

======

[0]kdb> btc
btc: cpu status: Currently on cpu 0
Available cpus: 0, 1-3(I), 4, 5(I)
Stack traceback for pid 0
0xffffff801101a9c0 0 0 1 0 R 0xffffff801101b3b0 *swapper/0
Call trace:
dump_backtrace+0x0/0x138
...
kgdb_compiled_brk_fn+0x34/0x44
...
sysrq_handle_dbg+0x34/0x5c
Stack traceback for pid 0
0xffffffc0f175a040 0 0 1 1 I 0xffffffc0f175aa30 swapper/1
Call trace:
__switch_to+0x1e4/0x240
0xffffffc0f65616c0
Stack traceback for pid 0
0xffffffc0f175d040 0 0 1 2 I 0xffffffc0f175da30 swapper/2
Call trace:
__switch_to+0x1e4/0x240
0xffffffc0f65806c0
Stack traceback for pid 0
0xffffffc0f175b040 0 0 1 3 I 0xffffffc0f175ba30 swapper/3
Call trace:
__switch_to+0x1e4/0x240
0xffffffc0f659f6c0
Stack traceback for pid 1474
0xffffffc0dde8b040 1474 727 1 4 R 0xffffffc0dde8ba30 bash
Call trace:
__switch_to+0x1e4/0x240
__schedule+0x464/0x618
0xffffffc0dde8b040
Stack traceback for pid 0
0xffffffc0f17b0040 0 0 1 5 I 0xffffffc0f17b0a30 swapper/5
Call trace:
__switch_to+0x1e4/0x240
0xffffffc0f65dd6c0

===

The problem is that 'btc' eventually boils down to
show_stack(task_struct, NULL);

...and show_stack() doesn't work for "running" CPUs because their
registers haven't been stashed.

On x86 things might work better (I haven't tested) because kdb has a
special case for x86 in kdb_show_stack() where it passes the stack
pointer to show_stack(). This wouldn't work on arm64 where the stack
crawling function seems needs the "fp" and "pc", not the "sp" which is
presumably why arm64's show_stack() function totally ignores the "sp"
parameter.

NOTE: we _can_ get a good stack dump for all the cpus if we manually
switch each one to the kdb master and do a back trace. AKA:
cpu 4
bt
...will give the expected trace. That's because now arm64's
dump_backtrace will now see that "tsk == current" and go through a
different path.

In this patch I fix the problems by catching a request to stack crawl
a task that's running on a CPU and then I ask that CPU to do the stack
crawl.

NOTE: this will (presumably) change what stack crawls are printed for
x86 machines. Now kdb functions will show up in the stack crawl.
Presumably this is OK but if it's not we can go back and add a special
case for x86 again.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>

show more ...

kgdb: Remove unused DCPU_SSTEP definition

From doing a 'git log --patch kernel/debug', it looks as if DCPU_SSTEP
has never been used. Presumably it used to be used back when kgdb was
out of tree an

kgdb: Remove unused DCPU_SSTEP definition

From doing a 'git log --patch kernel/debug', it looks as if DCPU_SSTEP
has never been used. Presumably it used to be used back when kgdb was
out of tree and nobody thought to delete the definition when the usage
went away. Delete.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.3 merge window.

Merge tag 'v5.1' into next

Sync up with mainline to bring in the latest APIs.