Merge drm/drm-fixes into drm-misc-fixes

Getting fixes and updates from v7.1-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'char-misc-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc / IIO / and others driver updates from Greg KH:
"Here is the char/misc/iio and other

Merge tag 'char-misc-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc / IIO / and others driver updates from Greg KH:
"Here is the char/misc/iio and other smaller driver subsystem updates
for 7.1-rc1. Lots of stuff in here, all tiny, but relevant for the
different drivers they touch. Major points in here is:

- the usual large set of new IIO drivers and updates for that
subsystem (the large majority of this diffstat)

- lots of comedi driver updates and bugfixes

- coresight driver updates

- interconnect driver updates and additions

- mei driver updates

- binder (both rust and C versions) updates and fixes

- lots of other smaller driver subsystem updates and additions

All of these have been in linux-next for a while with no reported
issues"

* tag 'char-misc-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (405 commits)
coresight: tpdm: fix invalid MMIO access issue
mei: me: add nova lake point H DID
mei: lb: add late binding version 2
mei: bus: add mei_cldev_uuid
w1: ds2490: drop redundant device reference
bus: mhi: host: pci_generic: Add Telit FE912C04 modem support
mei: csc: wake device while reading firmware status
mei: csc: support controller with separate PCI device
mei: convert PCI error to common errno
mei: trace: print return value of pci_cfg_read
mei: me: move trace into firmware status read
mei: fix idle print specifiers
mei: me: use PCI_DEVICE_DATA macro
sonypi: Convert ACPI driver to a platform one
misc: apds990x: fix all kernel-doc warnings
most: usb: Use kzalloc_objs for endpoint address array
hpet: Convert ACPI driver to a platform one
misc: vmw_vmci: Fix spelling mistakes in comments
parport: Remove completed item from to-do list
char: remove unnecessary module_init/exit functions
...

show more ...

Merge branch 'for-7.1-printf-kunit-build' into for-linus

Merge branch 'next' into for-linus

Prepare input updates for 7.1 merge window.

Merge tag 'rust-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux

Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:

- Bump the minimum Rust version to 1.85.0 (

Merge tag 'rust-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux

Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:

- Bump the minimum Rust version to 1.85.0 (and 'bindgen' to 0.71.1).

As proposed in LPC 2025 and the Maintainers Summit [1], we are
going to follow Debian Stable's Rust versions as our minimum
versions.

Debian Trixie was released on 2025-08-09 with a Rust 1.85.0 and
'bindgen' 0.71.1 toolchain, which is a fair amount of time for e.g.
kernel developers to upgrade.

Other major distributions support a Rust version that is high
enough as well, including:

+ Arch Linux.
+ Fedora Linux.
+ Gentoo Linux.
+ Nix.
+ openSUSE Slowroll and openSUSE Tumbleweed.
+ Ubuntu 25.10 and 26.04 LTS. In addition, 24.04 LTS using
their versioned packages.

The merged patch series comes with the associated cleanups and
simplifications treewide that can be performed thanks to both
bumps, as well as documentation updates.

In addition, start using 'bindgen''s '--with-attribute-custom-enum'
feature to set the 'cfi_encoding' attribute for the 'lru_status'
enum used in Binder.

Link: https://lwn.net/Articles/1050174/ [1]

- Add experimental Kconfig option ('CONFIG_RUST_INLINE_HELPERS') that
inlines C helpers into Rust.

Essentially, it performs a step similar to LTO, but just for the
helpers, i.e. very local and fast.

It relies on 'llvm-link' and its '--internalize' flag, and requires
a compatible LLVM between Clang and 'rustc' (i.e. same major
version, 'CONFIG_RUSTC_CLANG_LLVM_COMPATIBLE'). It is only enabled
for two architectures for now.

The result is a measurable speedup in different workloads that
different users have tested. For instance, for the null block
driver, it amounts to a 2%.

- Support global per-version flags.

While we already have per-version flags in many places, we didn't
have a place to set global ones that depend on the compiler
version, i.e. in 'rust_common_flags', which sometimes is needed to
e.g. tweak the lints set per version.

Use that to allow the 'clippy::precedence' lint for Rust < 1.86.0,
since it had a change in behavior.

- Support overriding the crate name and apply it to Rust Binder,
which wanted the module to be called 'rust_binder'.

- Add the remaining '__rust_helper' annotations (started in the
previous cycle).

'kernel' crate:

- Introduce the 'const_assert!' macro: a more powerful version of
'static_assert!' that can refer to generics inside functions or
implementation bodies, e.g.:

fn f<const N: usize>() {
const_assert!(N > 1);
}

fn g<T>() {
const_assert!(size_of::<T>() > 0, "T cannot be ZST");
}

In addition, reorganize our set of build-time assertion macros
('{build,const,static_assert}!') to live in the 'build_assert'
module.

Finally, improve the docs as well to clarify how these are
different from one another and how to pick the right one to use,
and their equivalence (if any) to the existing C ones for extra
clarity.

- 'sizes' module: add 'SizeConstants' trait.

This gives us typed 'SZ_*' constants (avoiding casts) for use in
device address spaces where the address width depends on the
hardware (e.g. 32-bit MMIO windows, 64-bit GPU framebuffers, etc.),
e.g.:

let gpu_heap = 14 * u64::SZ_1M;
let mmio_window = u32::SZ_16M;

- 'clk' module: implement 'Send' and 'Sync' for 'Clk' and thus
simplify the users in Tyr and PWM.

- 'ptr' module: add 'const_align_up'.

- 'str' module: improve the documentation of the 'c_str!' macro to
explain that one should only use it for non-literal cases (for the
other case we instead use C string literals, e.g. 'c"abc"').

- Disallow the use of 'CStr::{as_ptr,from_ptr}' and clean one such
use in the 'task' module.

- 'sync' module: finish the move of 'ARef' and 'AlwaysRefCounted'
outside of the 'types' module, i.e. update the last remaining
instances and finally remove the re-exports.

- 'error' module: clarify that 'from_err_ptr' can return 'Ok(NULL)',
including runtime-tested examples.

The intention is to hopefully prevent UB that assumes the result of
the function is not 'NULL' if successful. This originated from a
case of UB I noticed in 'regulator' that created a 'NonNull' on it.

Timekeeping:

- Expand the example section in the 'HrTimer' documentation.

- Mark the 'ClockSource' trait as unsafe to ensure valid values for
'ktime_get()'.

- Add 'Delta::from_nanos()'.

'pin-init' crate:

- Replace the 'Zeroable' impls for 'Option<NonZero*>' with impls of
'ZeroableOption' for 'NonZero*'.

- Improve feature gate handling for unstable features.

- Declutter the documentation of implementations of 'Zeroable' for
tuples.

- Replace uses of 'addr_of[_mut]!' with '&raw [mut]'.

rust-analyzer:

- Add type annotations to 'generate_rust_analyzer.py'.

- Add support for scripts written in Rust ('generate_rust_target.rs',
'rustdoc_test_builder.rs', 'rustdoc_test_gen.rs').

- Refactor 'generate_rust_analyzer.py' to explicitly identify host
and target crates, improve readability, and reduce duplication.

And some other fixes, cleanups and improvements"

* tag 'rust-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (79 commits)
rust: sizes: add SizeConstants trait for device address space constants
rust: kernel: update `file_with_nul` comment
rust: kbuild: allow `clippy::precedence` for Rust < 1.86.0
rust: kbuild: support global per-version flags
rust: declare cfi_encoding for lru_status
docs: rust: general-information: use real example
docs: rust: general-information: simplify Kconfig example
docs: rust: quick-start: remove GDB/Binutils mention
docs: rust: quick-start: remove Nix "unstable channel" note
docs: rust: quick-start: remove Gentoo "testing" note
docs: rust: quick-start: add Ubuntu 26.04 LTS and remove subsection title
docs: rust: quick-start: update minimum Ubuntu version
docs: rust: quick-start: update Ubuntu versioned packages
docs: rust: quick-start: openSUSE provides `rust-src` package nowadays
rust: kbuild: remove "dummy parameter" workaround for `bindgen` < 0.71.1
rust: kbuild: update `bindgen --rust-target` version and replace comment
rust: rust_is_available: remove warning for `bindgen` < 0.69.5 && libclang >= 19.1
rust: rust_is_available: remove warning for `bindgen` 0.66.[01]
rust: bump `bindgen` minimum supported version to 0.71.1 (Debian Trixie)
rust: block: update `const_refs_to_static` MSRV TODO comment
...

show more ...

rust: task: implement == operator for Task

It's useful to compare if two tasks are the same task or not. Rust
Binder wants this to check if a certain task is equal to the group
leader of current.

R

rust: task: implement == operator for Task

It's useful to compare if two tasks are the same task or not. Rust
Binder wants this to check if a certain task is equal to the group
leader of current.

Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260324-close-fd-check-current-v3-2-b94274bedac7@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge tag 'v7.0-rc3' into next

Sync up with the mainline to brig up the latest changes, specifically
changes to ALPS driver.

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 7.00-rc3. Important ahead GPU SVM merging THP
support.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>

rust: task: use `as_char_ptr` instead of `as_ptr().cast()`

`as_char_ptr` would provide the correct (unsigned char) type without
needing to convert to an intermediate type and cast the pointer.

The

rust: task: use `as_char_ptr` instead of `as_ptr().cast()`

`as_char_ptr` would provide the correct (unsigned char) type without
needing to convert to an intermediate type and cast the pointer.

The `as_ptr()` function is going to be disallowed by clippy warning, so fix
this usage.

This is used only if CONFIG_DEBUG_ATOMIC_SLEEP=y. Instead of conditionally
importing `CStrExt`, import it via prelude instead, and remove other
imports that are already available via the prelude.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601221157.89t3Sqbl-lkp@intel.com/
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260203130745.868762-1-gary@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>

show more ...

Merge drm/drm-next into drm-intel-next

Sync with v7.0-rc1 which contains a few treewide changes affecting i915.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Let's merge 7.0-rc1 to start the new drm-misc-next window

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-fixes into drm-misc-fixes

7.0-rc1 was just released, let's merge it to kick the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull non-MM updates from Andrew Morton:

- "ocfs2: give ocfs2 the ability to reclaim suballocat

Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull non-MM updates from Andrew Morton:

- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)

- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)

- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)

- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)

- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)

- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)

- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)

- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)

- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)

- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)

- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)

* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...

show more ...

rust: task: restrict Task::group_leader() to current

The Task::group_leader() method currently allows you to access the
group_leader() of any task, for example one you hold a refcount to. But
this

rust: task: restrict Task::group_leader() to current

The Task::group_leader() method currently allows you to access the
group_leader() of any task, for example one you hold a refcount to. But
this is not safe in general since the group leader could change when a
task exits. See for example commit a15f37a40145c ("kernel/sys.c: fix the
racy usage of task_lock(tsk->group_leader) in sys_prlimit64() paths").

All existing users of Task::group_leader() call this method on current,
which is guaranteed running, so there's not an actual issue in Rust code
today. But to prevent code in the future from making this mistake,
restrict Task::group_leader() so that it can only be called on current.

There are some other cases where accessing task->group_leader is okay.
For example it can be safe if you hold tasklist_lock or rcu_read_lock().
However, only supporting current->group_leader is sufficient for all
in-tree Rust users of group_leader right now. Safe Rust functionality for
accessing it under rcu or while holding tasklist_lock may be added in the
future if required by any future Rust module.

This patch is a bugfix in that it prevents users of this API from writing
incorrect code. It doesn't change behavior of correct code.

Link: https://lkml.kernel.org/r/20260107-task-group-leader-v2-1-8fbf816f2a2f@google.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Fixes: 313c4281bc9d ("rust: add basic `Task`")
Reported-by: Oleg Nesterov <oleg@redhat.com>
Closes: https://lore.kernel.org/all/aTLnV-5jlgfk1aRK@redhat.com/
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Benno Lossin <lossin@kernel.org>
Cc: "Björn Roy Baron" <bjorn3_gh@protonmail.com>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: FUJITA Tomonori <fujita.tomonori@gmail.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Panagiotis Foliadis <pfoliadis@posteo.net>
Cc: Shankari Anand <shankari.ak0208@gmail.com>
Cc: Trevor Gross <tmgross@umich.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

Merge tag 'v6.18' into next

Sync up with the mainline to bring in the latest APIs.

Merge branch 'objtool/core'

Bring in the UDB and objtool data annotations to avoid conflicts while further extending the bug exceptions.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge tag 'v6.18-rc6' into for-linus

Sync up with the mainline to bring in definition of
INPUT_PROP_HAPTIC_TOUCHPAD.

Merge remote-tracking branch 'drm/drm-next' into msm-next-robclark

Back-merge drm-next to get caught up.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

Merge tag 'asoc-fix-v6.18-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.18

A moderately large collection of driver specific fixes, plus a f

Merge tag 'asoc-fix-v6.18-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.18

A moderately large collection of driver specific fixes, plus a few new
quirks and device IDs. The NAU8821 changes are a little large but more
in mechanical ways than in ways that are complex.

show more ...

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.18-rc1.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Updating drm-misc-fixes to the state of v6.18-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync to v6.18-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

spi: Merge up v6.18-rc1

Ensure my CI has a sensible baseline.

Merge drm/drm-next into drm-misc-next

Updating drm-misc-next to the state of v6.18-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'next' into for-linus

Prepare input updates for 6.18 merge window.